On Mon, Feb 26, 2024 at 03:01:50PM +0100, amergnat@xxxxxxxxxxxx wrote:
> index 000000000000..13e95c227114
> --- /dev/null
> +++ b/sound/soc/codecs/mt6357.c
> @@ -0,0 +1,1805 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * MT6357 ALSA SoC audio codec driver
> + *
Please use a C++ comment for the whole comment to make it clearer that
this is intentional.
> +static void set_playback_gpio(struct mt6357_priv *priv, bool enable)
> +{
> + if (enable) {
> + /* set gpio mosi mode */
> + regmap_write(priv->regmap, MT6357_GPIO_MODE2_CLR, GPIO_MODE2_CLEAR_ALL);
> + regmap_write(priv->regmap, MT6357_GPIO_MODE2_SET, GPIO8_MODE_SET_AUD_CLK_MOSI |
> + GPIO9_MODE_SET_AUD_DAT_MOSI0 |
> + GPIO10_MODE_SET_AUD_DAT_MOSI1 |
> + GPIO11_MODE_SET_AUD_SYNC_MOSI);
This would be a lot more legible if you worked out the values to set and
then had a single set of writes, currently the indentation makes it very
hard to read. Similarly for other similar functions.
> +static int mt6357_put_volsw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
> +{
> + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
> + struct mt6357_priv *priv = snd_soc_component_get_drvdata(component);
> + struct soc_mixer_control *mc = (struct soc_mixer_control *)kcontrol->private_value;
> + unsigned int reg;
> + int ret;
> +
> + ret = snd_soc_put_volsw(kcontrol, ucontrol);
> + if (ret < 0)
> + return ret;
> +
> + switch (mc->reg) {
> + case MT6357_ZCD_CON2:
> + regmap_read(priv->regmap, MT6357_ZCD_CON2, ®);
> + priv->ana_gain[ANALOG_VOLUME_HPOUTL] =
> + (reg & AUD_HPL_GAIN_MASK) >> AUD_HPL_GAIN_SFT;
> + priv->ana_gain[ANALOG_VOLUME_HPOUTR] =
> + (reg & AUD_HPR_GAIN_MASK) >> AUD_HPR_GAIN_SFT;
> + break;
It would probably be less code and would definitely be clearer and
simpler to just read the values when we need them rather than constatly
keeping a cache separate to the register cache.
> + /* ul channel swap */
> + SOC_SINGLE("UL LR Swap", MT6357_AFE_UL_DL_CON0, AFE_UL_LR_SWAP_SFT, 1, 0),
On/off controls should end in Switch.
> +static const char * const hslo_mux_map[] = {
> + "Open", "DACR", "Playback", "Test mode"
> +};
> +
> +static int hslo_mux_map_value[] = {
> + 0x0, 0x1, 0x2, 0x3,
> +};
Why not just use a normal mux here, there's no missing values or
reordering? Similarly for other muxes.
> +static unsigned int mt6357_read(struct snd_soc_component *codec, unsigned int reg)
> +{
> + struct mt6357_priv *priv = snd_soc_component_get_drvdata(codec);
> + unsigned int val;
> +
> + pr_debug("%s() reg = 0x%x", __func__, reg);
> + regmap_read(priv->regmap, reg, &val);
> + return val;
> +}
Remove these, there are vastly more logging facilities as standard in
the regmap core.
> +/* Reg bit defines */
> +/* MT6357_GPIO_DIR0 */
> +#define GPIO8_DIR_MASK BIT(8)
> +#define GPIO8_DIR_INPUT 0
Please namespace your defines, these look very generic.
Attachment:
signature.asc
Description: PGP signature
