Hi Shirish, On Tuesday 13 of August 2013 12:39:27 Shirish S wrote: > For various revision of chipset if the signal pattern is changed for > every board, then the phy setting need to be updated correspondingly by > measuring the signal. > With the hdmiphy settings fixed in the driver the only way currently is > to either add a new structure or add compile time option. > To avoid this, we can move the same to dt, wherin we can have different > dt files for every revision. This patchset can be considered as an > initiative towards achieving the same for exynos 5250 and can be later > extended to future chipsets. > Also this patchset moves the entire structure to dt file as-is in the > driver and hence we can find all the hex values, which are not logically > explained similar to driver. > > Shirish S (3): > ARM: dts: smdk5250: Add hdmi phy settings > ARM: dts: arndale: Add hdmi phy settings > drm: exynos: hdmi: Add dt support for hdmiphy settings > > .../devicetree/bindings/video/exynos_hdmi.txt | 18 +- > arch/arm/boot/dts/exynos5250-arndale.dts | 120 ++++++++++++ > arch/arm/boot/dts/exynos5250-smdk5250.dts | 120 ++++++++++++ > drivers/gpu/drm/exynos/exynos_hdmi.c | 191 > +++++++------------- 4 files changed, 320 insertions(+), 129 > deletions(-) Since this series is related to Exynos platform files, please also Cc the linux-samsung-soc mailing list and Kukjin Kim. Same goes for device tree bindings. If you change anything related to device tree, you need to post your patches to devicetree@xxxxxxxxxxxxxxx mailing list. Ccing device tree maintainers is also a good practice. Please resend this series with above two issues addressed. Best regards, Tomasz _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
