[PATCH v2] drm/edid/firmware: Remove built-in EDIDs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The EDID firmware loading mechanism introduced a few built-in EDIDs that
could be forced on any connector, bypassing the EDIDs it exposes.

While convenient, this limited set of EDIDs doesn't take into account
the connector type, and we can end up with an EDID that is completely
invalid for a given connector.

For example, the edid/800x600.bin file matches the following EDID:

  edid-decode (hex):

  00 ff ff ff ff ff ff 00 31 d8 00 00 00 00 00 00
  05 16 01 03 6d 1b 14 78 ea 5e c0 a4 59 4a 98 25
  20 50 54 01 00 00 45 40 01 01 01 01 01 01 01 01
  01 01 01 01 01 01 a0 0f 20 00 31 58 1c 20 28 80
  14 00 15 d0 10 00 00 1e 00 00 00 ff 00 4c 69 6e
  75 78 20 23 30 0a 20 20 20 20 00 00 00 fd 00 3b
  3d 24 26 05 00 0a 20 20 20 20 20 20 00 00 00 fc
  00 4c 69 6e 75 78 20 53 56 47 41 0a 20 20 00 c2

  ----------------

  Block 0, Base EDID:
    EDID Structure Version & Revision: 1.3
    Vendor & Product Identification:
      Manufacturer: LNX
      Model: 0
      Made in: week 5 of 2012
    Basic Display Parameters & Features:
      Analog display
      Signal Level Standard: 0.700 : 0.000 : 0.700 V p-p
      Blank level equals black level
      Sync: Separate Composite Serration
      Maximum image size: 27 cm x 20 cm
      Gamma: 2.20
      DPMS levels: Standby Suspend Off
      RGB color display
      First detailed timing is the preferred timing
    Color Characteristics:
      Red  : 0.6416, 0.3486
      Green: 0.2919, 0.5957
      Blue : 0.1474, 0.1250
      White: 0.3125, 0.3281
    Established Timings I & II:
      DMT 0x09:   800x600    60.316541 Hz   4:3     37.879 kHz     40.000000 MHz
    Standard Timings:
      DMT 0x09:   800x600    60.316541 Hz   4:3     37.879 kHz     40.000000 MHz
    Detailed Timing Descriptors:
      DTD 1:   800x600    60.316541 Hz   4:3     37.879 kHz     40.000000 MHz (277 mm x 208 mm)
                   Hfront   40 Hsync 128 Hback   88 Hpol P
                   Vfront    1 Vsync   4 Vback   23 Vpol P
      Display Product Serial Number: 'Linux #0'
      Display Range Limits:
        Monitor ranges (GTF): 59-61 Hz V, 36-38 kHz H, max dotclock 50 MHz
      Display Product Name: 'Linux SVGA'
  Checksum: 0xc2

So, an analog monitor EDID. However, if the connector was an HDMI
monitor for example, it breaks the HDMI specification that requires,
among other things, a digital display, the VIC 1 mode and an HDMI Forum
Vendor Specific Data Block in an CTA-861 extension.

We thus end up with a completely invalid EDID, which thus might confuse
HDMI-related code that could parse it.

After some discussions on IRC, we identified mainly two ways to fix
this:

  - We can either create more EDIDs for each connector type to provide
    a built-in EDID that matches the resolution passed in the name, and
    still be a sensible EDID for that connector type;

  - Or we can just prevent the EDID to be exposed to userspace if it's
    built-in.

Or possibly both.

However, the conclusion was that maybe we just don't need the built-in
EDIDs at all and we should just get rid of them. So here we are.

Acked-by: Thomas Zimmermann <tzimmermann@xxxxxxx>
Signed-off-by: Maxime Ripard <mripard@xxxxxxxxxx>
---
 Documentation/admin-guide/edid.rst            |  35 +--
 .../admin-guide/kernel-parameters.txt         |  14 +-
 drivers/gpu/drm/drm_edid_load.c               | 160 +---------
 tools/edid/1024x768.S                         |  43 ---
 tools/edid/1280x1024.S                        |  43 ---
 tools/edid/1600x1200.S                        |  43 ---
 tools/edid/1680x1050.S                        |  43 ---
 tools/edid/1920x1080.S                        |  43 ---
 tools/edid/800x600.S                          |  40 ---
 tools/edid/Makefile                           |  37 ---
 tools/edid/edid.S                             | 274 ------------------
 tools/edid/hex                                |   1 -
 12 files changed, 18 insertions(+), 758 deletions(-)
 delete mode 100644 tools/edid/1024x768.S
 delete mode 100644 tools/edid/1280x1024.S
 delete mode 100644 tools/edid/1600x1200.S
 delete mode 100644 tools/edid/1680x1050.S
 delete mode 100644 tools/edid/1920x1080.S
 delete mode 100644 tools/edid/800x600.S
 delete mode 100644 tools/edid/Makefile
 delete mode 100644 tools/edid/edid.S
 delete mode 100644 tools/edid/hex

diff --git a/Documentation/admin-guide/edid.rst b/Documentation/admin-guide/edid.rst
index 80deeb21a265..1a9b965aa486 100644
--- a/Documentation/admin-guide/edid.rst
+++ b/Documentation/admin-guide/edid.rst
@@ -24,37 +24,4 @@ restrictions later on.
 As a remedy for such situations, the kernel configuration item
 CONFIG_DRM_LOAD_EDID_FIRMWARE was introduced. It allows to provide an
 individually prepared or corrected EDID data set in the /lib/firmware
-directory from where it is loaded via the firmware interface. The code
-(see drivers/gpu/drm/drm_edid_load.c) contains built-in data sets for
-commonly used screen resolutions (800x600, 1024x768, 1280x1024, 1600x1200,
-1680x1050, 1920x1080) as binary blobs, but the kernel source tree does
-not contain code to create these data. In order to elucidate the origin
-of the built-in binary EDID blobs and to facilitate the creation of
-individual data for a specific misbehaving monitor, commented sources
-and a Makefile environment are given here.
-
-To create binary EDID and C source code files from the existing data
-material, simply type "make" in tools/edid/.
-
-If you want to create your own EDID file, copy the file 1024x768.S,
-replace the settings with your own data and add a new target to the
-Makefile. Please note that the EDID data structure expects the timing
-values in a different way as compared to the standard X11 format.
-
-X11:
-  HTimings:
-    hdisp hsyncstart hsyncend htotal
-  VTimings:
-    vdisp vsyncstart vsyncend vtotal
-
-EDID::
-
-  #define XPIX hdisp
-  #define XBLANK htotal-hdisp
-  #define XOFFSET hsyncstart-hdisp
-  #define XPULSE hsyncend-hsyncstart
-
-  #define YPIX vdisp
-  #define YBLANK vtotal-vdisp
-  #define YOFFSET vsyncstart-vdisp
-  #define YPULSE vsyncend-vsyncstart
+directory from where it is loaded via the firmware interface.
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 460b97a1d0da..1c4eb43e4812 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1168,16 +1168,10 @@
 			panels may send no or incorrect EDID data sets.
 			This parameter allows to specify an EDID data sets
 			in the /lib/firmware directory that are used instead.
-			Generic built-in EDID data sets are used, if one of
-			edid/1024x768.bin, edid/1280x1024.bin,
-			edid/1680x1050.bin, or edid/1920x1080.bin is given
-			and no file with the same name exists. Details and
-			instructions how to build your own EDID data are
-			available in Documentation/admin-guide/edid.rst. An EDID
-			data set will only be used for a particular connector,
-			if its name and a colon are prepended to the EDID
-			name. Each connector may use a unique EDID data
-			set by separating the files with a comma.  An EDID
+			An EDID data set will only be used for a particular
+			connector, if its name and a colon are prepended to
+			the EDID name. Each connector may use a unique EDID
+			data set by separating the files with a comma. An EDID
 			data set with no connector name will be used for
 			any connectors not explicitly specified.
 
diff --git a/drivers/gpu/drm/drm_edid_load.c b/drivers/gpu/drm/drm_edid_load.c
index 60fcb80bce61..d1c7e8298702 100644
--- a/drivers/gpu/drm/drm_edid_load.c
+++ b/drivers/gpu/drm/drm_edid_load.c
@@ -20,162 +20,28 @@
 
 static char edid_firmware[PATH_MAX];
 module_param_string(edid_firmware, edid_firmware, sizeof(edid_firmware), 0644);
-MODULE_PARM_DESC(edid_firmware, "Do not probe monitor, use specified EDID blob "
-	"from built-in data or /lib/firmware instead. ");
-
-#define GENERIC_EDIDS 6
-static const char * const generic_edid_name[GENERIC_EDIDS] = {
-	"edid/800x600.bin",
-	"edid/1024x768.bin",
-	"edid/1280x1024.bin",
-	"edid/1600x1200.bin",
-	"edid/1680x1050.bin",
-	"edid/1920x1080.bin",
-};
-
-static const u8 generic_edid[GENERIC_EDIDS][128] = {
-	{
-	0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
-	0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x05, 0x16, 0x01, 0x03, 0x6d, 0x1b, 0x14, 0x78,
-	0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25,
-	0x20, 0x50, 0x54, 0x01, 0x00, 0x00, 0x45, 0x40,
-	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
-	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0xa0, 0x0f,
-	0x20, 0x00, 0x31, 0x58, 0x1c, 0x20, 0x28, 0x80,
-	0x14, 0x00, 0x15, 0xd0, 0x10, 0x00, 0x00, 0x1e,
-	0x00, 0x00, 0x00, 0xff, 0x00, 0x4c, 0x69, 0x6e,
-	0x75, 0x78, 0x20, 0x23, 0x30, 0x0a, 0x20, 0x20,
-	0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x3b,
-	0x3d, 0x24, 0x26, 0x05, 0x00, 0x0a, 0x20, 0x20,
-	0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfc,
-	0x00, 0x4c, 0x69, 0x6e, 0x75, 0x78, 0x20, 0x53,
-	0x56, 0x47, 0x41, 0x0a, 0x20, 0x20, 0x00, 0xc2,
-	},
-	{
-	0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
-	0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x05, 0x16, 0x01, 0x03, 0x6d, 0x23, 0x1a, 0x78,
-	0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25,
-	0x20, 0x50, 0x54, 0x00, 0x08, 0x00, 0x61, 0x40,
-	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
-	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x64, 0x19,
-	0x00, 0x40, 0x41, 0x00, 0x26, 0x30, 0x08, 0x90,
-	0x36, 0x00, 0x63, 0x0a, 0x11, 0x00, 0x00, 0x18,
-	0x00, 0x00, 0x00, 0xff, 0x00, 0x4c, 0x69, 0x6e,
-	0x75, 0x78, 0x20, 0x23, 0x30, 0x0a, 0x20, 0x20,
-	0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x3b,
-	0x3d, 0x2f, 0x31, 0x07, 0x00, 0x0a, 0x20, 0x20,
-	0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfc,
-	0x00, 0x4c, 0x69, 0x6e, 0x75, 0x78, 0x20, 0x58,
-	0x47, 0x41, 0x0a, 0x20, 0x20, 0x20, 0x00, 0x55,
-	},
-	{
-	0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
-	0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x05, 0x16, 0x01, 0x03, 0x6d, 0x2c, 0x23, 0x78,
-	0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25,
-	0x20, 0x50, 0x54, 0x00, 0x00, 0x00, 0x81, 0x80,
-	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
-	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x30, 0x2a,
-	0x00, 0x98, 0x51, 0x00, 0x2a, 0x40, 0x30, 0x70,
-	0x13, 0x00, 0xbc, 0x63, 0x11, 0x00, 0x00, 0x1e,
-	0x00, 0x00, 0x00, 0xff, 0x00, 0x4c, 0x69, 0x6e,
-	0x75, 0x78, 0x20, 0x23, 0x30, 0x0a, 0x20, 0x20,
-	0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x3b,
-	0x3d, 0x3e, 0x40, 0x0b, 0x00, 0x0a, 0x20, 0x20,
-	0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfc,
-	0x00, 0x4c, 0x69, 0x6e, 0x75, 0x78, 0x20, 0x53,
-	0x58, 0x47, 0x41, 0x0a, 0x20, 0x20, 0x00, 0xa0,
-	},
-	{
-	0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
-	0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x05, 0x16, 0x01, 0x03, 0x6d, 0x37, 0x29, 0x78,
-	0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25,
-	0x20, 0x50, 0x54, 0x00, 0x00, 0x00, 0xa9, 0x40,
-	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
-	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x48, 0x3f,
-	0x40, 0x30, 0x62, 0xb0, 0x32, 0x40, 0x40, 0xc0,
-	0x13, 0x00, 0x2b, 0xa0, 0x21, 0x00, 0x00, 0x1e,
-	0x00, 0x00, 0x00, 0xff, 0x00, 0x4c, 0x69, 0x6e,
-	0x75, 0x78, 0x20, 0x23, 0x30, 0x0a, 0x20, 0x20,
-	0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x3b,
-	0x3d, 0x4a, 0x4c, 0x11, 0x00, 0x0a, 0x20, 0x20,
-	0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfc,
-	0x00, 0x4c, 0x69, 0x6e, 0x75, 0x78, 0x20, 0x55,
-	0x58, 0x47, 0x41, 0x0a, 0x20, 0x20, 0x00, 0x9d,
-	},
-	{
-	0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
-	0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x05, 0x16, 0x01, 0x03, 0x6d, 0x2b, 0x1b, 0x78,
-	0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25,
-	0x20, 0x50, 0x54, 0x00, 0x00, 0x00, 0xb3, 0x00,
-	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
-	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x21, 0x39,
-	0x90, 0x30, 0x62, 0x1a, 0x27, 0x40, 0x68, 0xb0,
-	0x36, 0x00, 0xb5, 0x11, 0x11, 0x00, 0x00, 0x1e,
-	0x00, 0x00, 0x00, 0xff, 0x00, 0x4c, 0x69, 0x6e,
-	0x75, 0x78, 0x20, 0x23, 0x30, 0x0a, 0x20, 0x20,
-	0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x3b,
-	0x3d, 0x40, 0x42, 0x0f, 0x00, 0x0a, 0x20, 0x20,
-	0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfc,
-	0x00, 0x4c, 0x69, 0x6e, 0x75, 0x78, 0x20, 0x57,
-	0x53, 0x58, 0x47, 0x41, 0x0a, 0x20, 0x00, 0x26,
-	},
-	{
-	0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
-	0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x05, 0x16, 0x01, 0x03, 0x6d, 0x32, 0x1c, 0x78,
-	0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25,
-	0x20, 0x50, 0x54, 0x00, 0x00, 0x00, 0xd1, 0xc0,
-	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
-	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x3a,
-	0x80, 0x18, 0x71, 0x38, 0x2d, 0x40, 0x58, 0x2c,
-	0x45, 0x00, 0xf4, 0x19, 0x11, 0x00, 0x00, 0x1e,
-	0x00, 0x00, 0x00, 0xff, 0x00, 0x4c, 0x69, 0x6e,
-	0x75, 0x78, 0x20, 0x23, 0x30, 0x0a, 0x20, 0x20,
-	0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x3b,
-	0x3d, 0x42, 0x44, 0x0f, 0x00, 0x0a, 0x20, 0x20,
-	0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfc,
-	0x00, 0x4c, 0x69, 0x6e, 0x75, 0x78, 0x20, 0x46,
-	0x48, 0x44, 0x0a, 0x20, 0x20, 0x20, 0x00, 0x05,
-	},
-};
+MODULE_PARM_DESC(edid_firmware,
+		 "Do not probe monitor, use specified EDID blob from /lib/firmware instead.");
 
 static const struct drm_edid *edid_load(struct drm_connector *connector, const char *name)
 {
 	const struct firmware *fw = NULL;
-	const u8 *fwdata;
 	const struct drm_edid *drm_edid;
-	int fwsize, builtin;
+	int err;
 
-	builtin = match_string(generic_edid_name, GENERIC_EDIDS, name);
-	if (builtin >= 0) {
-		fwdata = generic_edid[builtin];
-		fwsize = sizeof(generic_edid[builtin]);
-	} else {
-		int err;
-
-		err = request_firmware(&fw, name, connector->dev->dev);
-		if (err) {
-			drm_err(connector->dev,
-				"[CONNECTOR:%d:%s] Requesting EDID firmware \"%s\" failed (err=%d)\n",
-				connector->base.id, connector->name,
-				name, err);
-			return ERR_PTR(err);
-		}
-
-		fwdata = fw->data;
-		fwsize = fw->size;
+	err = request_firmware(&fw, name, connector->dev->dev);
+	if (err) {
+		drm_err(connector->dev,
+			"[CONNECTOR:%d:%s] Requesting EDID firmware \"%s\" failed (err=%d)\n",
+			connector->base.id, connector->name,
+			name, err);
+		return ERR_PTR(err);
 	}
 
-	drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] Loaded %s firmware EDID \"%s\"\n",
-		    connector->base.id, connector->name,
-		    builtin >= 0 ? "built-in" : "external", name);
+	drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] Loaded external firmware EDID \"%s\"\n",
+		    connector->base.id, connector->name, name);
 
-	drm_edid = drm_edid_alloc(fwdata, fwsize);
+	drm_edid = drm_edid_alloc(fw->data, fw->size);
 	if (!drm_edid_valid(drm_edid)) {
 		drm_err(connector->dev, "Invalid firmware EDID \"%s\"\n", name);
 		drm_edid_free(drm_edid);
diff --git a/tools/edid/1024x768.S b/tools/edid/1024x768.S
deleted file mode 100644
index 4aed3f9ab88a..000000000000
--- a/tools/edid/1024x768.S
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
-   1024x768.S: EDID data set for standard 1024x768 60 Hz monitor
-
-   Copyright (C) 2011 Carsten Emde <C.Emde@xxxxxxxxx>
-
-   This program is free software; you can redistribute it and/or
-   modify it under the terms of the GNU General Public License
-   as published by the Free Software Foundation; either version 2
-   of the License, or (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA.
-*/
-
-/* EDID */
-#define VERSION 1
-#define REVISION 3
-
-/* Display */
-#define CLOCK 65000 /* kHz */
-#define XPIX 1024
-#define YPIX 768
-#define XY_RATIO XY_RATIO_4_3
-#define XBLANK 320
-#define YBLANK 38
-#define XOFFSET 8
-#define XPULSE 144
-#define YOFFSET 3
-#define YPULSE 6
-#define DPI 72
-#define VFREQ 60 /* Hz */
-#define TIMING_NAME "Linux XGA"
-#define ESTABLISHED_TIMING2_BITS 0x08 /* Bit 3 -> 1024x768 @60 Hz */
-#define HSYNC_POL 0
-#define VSYNC_POL 0
-
-#include "edid.S"
diff --git a/tools/edid/1280x1024.S b/tools/edid/1280x1024.S
deleted file mode 100644
index b26dd424cad7..000000000000
--- a/tools/edid/1280x1024.S
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
-   1280x1024.S: EDID data set for standard 1280x1024 60 Hz monitor
-
-   Copyright (C) 2011 Carsten Emde <C.Emde@xxxxxxxxx>
-
-   This program is free software; you can redistribute it and/or
-   modify it under the terms of the GNU General Public License
-   as published by the Free Software Foundation; either version 2
-   of the License, or (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA.
-*/
-
-/* EDID */
-#define VERSION 1
-#define REVISION 3
-
-/* Display */
-#define CLOCK 108000 /* kHz */
-#define XPIX 1280
-#define YPIX 1024
-#define XY_RATIO XY_RATIO_5_4
-#define XBLANK 408
-#define YBLANK 42
-#define XOFFSET 48
-#define XPULSE 112
-#define YOFFSET 1
-#define YPULSE 3
-#define DPI 72
-#define VFREQ 60 /* Hz */
-#define TIMING_NAME "Linux SXGA"
-/* No ESTABLISHED_TIMINGx_BITS */
-#define HSYNC_POL 1
-#define VSYNC_POL 1
-
-#include "edid.S"
diff --git a/tools/edid/1600x1200.S b/tools/edid/1600x1200.S
deleted file mode 100644
index 0d091b282768..000000000000
--- a/tools/edid/1600x1200.S
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
-   1600x1200.S: EDID data set for standard 1600x1200 60 Hz monitor
-
-   Copyright (C) 2013 Carsten Emde <C.Emde@xxxxxxxxx>
-
-   This program is free software; you can redistribute it and/or
-   modify it under the terms of the GNU General Public License
-   as published by the Free Software Foundation; either version 2
-   of the License, or (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA.
-*/
-
-/* EDID */
-#define VERSION 1
-#define REVISION 3
-
-/* Display */
-#define CLOCK 162000 /* kHz */
-#define XPIX 1600
-#define YPIX 1200
-#define XY_RATIO XY_RATIO_4_3
-#define XBLANK 560
-#define YBLANK 50
-#define XOFFSET 64
-#define XPULSE 192
-#define YOFFSET 1
-#define YPULSE 3
-#define DPI 72
-#define VFREQ 60 /* Hz */
-#define TIMING_NAME "Linux UXGA"
-/* No ESTABLISHED_TIMINGx_BITS */
-#define HSYNC_POL 1
-#define VSYNC_POL 1
-
-#include "edid.S"
diff --git a/tools/edid/1680x1050.S b/tools/edid/1680x1050.S
deleted file mode 100644
index 7dfed9a33eab..000000000000
--- a/tools/edid/1680x1050.S
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
-   1680x1050.S: EDID data set for standard 1680x1050 60 Hz monitor
-
-   Copyright (C) 2012 Carsten Emde <C.Emde@xxxxxxxxx>
-
-   This program is free software; you can redistribute it and/or
-   modify it under the terms of the GNU General Public License
-   as published by the Free Software Foundation; either version 2
-   of the License, or (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA.
-*/
-
-/* EDID */
-#define VERSION 1
-#define REVISION 3
-
-/* Display */
-#define CLOCK 146250 /* kHz */
-#define XPIX 1680
-#define YPIX 1050
-#define XY_RATIO XY_RATIO_16_10
-#define XBLANK 560
-#define YBLANK 39
-#define XOFFSET 104
-#define XPULSE 176
-#define YOFFSET 3
-#define YPULSE 6
-#define DPI 96
-#define VFREQ 60 /* Hz */
-#define TIMING_NAME "Linux WSXGA"
-/* No ESTABLISHED_TIMINGx_BITS */
-#define HSYNC_POL 1
-#define VSYNC_POL 1
-
-#include "edid.S"
diff --git a/tools/edid/1920x1080.S b/tools/edid/1920x1080.S
deleted file mode 100644
index d6ffbba28e95..000000000000
--- a/tools/edid/1920x1080.S
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
-   1920x1080.S: EDID data set for standard 1920x1080 60 Hz monitor
-
-   Copyright (C) 2012 Carsten Emde <C.Emde@xxxxxxxxx>
-
-   This program is free software; you can redistribute it and/or
-   modify it under the terms of the GNU General Public License
-   as published by the Free Software Foundation; either version 2
-   of the License, or (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA.
-*/
-
-/* EDID */
-#define VERSION 1
-#define REVISION 3
-
-/* Display */
-#define CLOCK 148500 /* kHz */
-#define XPIX 1920
-#define YPIX 1080
-#define XY_RATIO XY_RATIO_16_9
-#define XBLANK 280
-#define YBLANK 45
-#define XOFFSET 88
-#define XPULSE 44
-#define YOFFSET 4
-#define YPULSE 5
-#define DPI 96
-#define VFREQ 60 /* Hz */
-#define TIMING_NAME "Linux FHD"
-/* No ESTABLISHED_TIMINGx_BITS */
-#define HSYNC_POL 1
-#define VSYNC_POL 1
-
-#include "edid.S"
diff --git a/tools/edid/800x600.S b/tools/edid/800x600.S
deleted file mode 100644
index a5616588de08..000000000000
--- a/tools/edid/800x600.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
-   800x600.S: EDID data set for standard 800x600 60 Hz monitor
-
-   Copyright (C) 2011 Carsten Emde <C.Emde@xxxxxxxxx>
-   Copyright (C) 2014 Linaro Limited
-
-   This program is free software; you can redistribute it and/or
-   modify it under the terms of the GNU General Public License
-   as published by the Free Software Foundation; either version 2
-   of the License, or (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-*/
-
-/* EDID */
-#define VERSION 1
-#define REVISION 3
-
-/* Display */
-#define CLOCK 40000 /* kHz */
-#define XPIX 800
-#define YPIX 600
-#define XY_RATIO XY_RATIO_4_3
-#define XBLANK 256
-#define YBLANK 28
-#define XOFFSET 40
-#define XPULSE 128
-#define YOFFSET 1
-#define YPULSE 4
-#define DPI 72
-#define VFREQ 60 /* Hz */
-#define TIMING_NAME "Linux SVGA"
-#define ESTABLISHED_TIMING1_BITS 0x01 /* Bit 0: 800x600 @ 60Hz */
-#define HSYNC_POL 1
-#define VSYNC_POL 1
-
-#include "edid.S"
diff --git a/tools/edid/Makefile b/tools/edid/Makefile
deleted file mode 100644
index 85a927dfab02..000000000000
--- a/tools/edid/Makefile
+++ /dev/null
@@ -1,37 +0,0 @@
-
-SOURCES	:= $(wildcard [0-9]*x[0-9]*.S)
-
-BIN	:= $(patsubst %.S, %.bin, $(SOURCES))
-
-IHEX	:= $(patsubst %.S, %.bin.ihex, $(SOURCES))
-
-CODE	:= $(patsubst %.S, %.c, $(SOURCES))
-
-all:	$(BIN) $(IHEX) $(CODE)
-
-clean:
-	@rm -f *.o *.bin.ihex *.bin *.c
-
-%.o:	%.S
-	@cc -c $^
-
-%.bin.nocrc:	%.o
-	@objcopy -Obinary $^ $@
-
-%.crc:	%.bin.nocrc
-	@list=$$(for i in `seq 1 127`; do head -c$$i $^ | tail -c1 \
-		| hexdump -v -e '/1 "%02X+"'; done); \
-		echo "ibase=16;100-($${list%?})%100" | bc >$@
-
-%.p:	%.crc %.S
-	@cc -c -DCRC="$$(cat $*.crc)" -o $@ $*.S
-
-%.bin:	%.p
-	@objcopy -Obinary $^ $@
-
-%.bin.ihex:	%.p
-	@objcopy -Oihex $^ $@
-	@dos2unix $@ 2>/dev/null
-
-%.c:	%.bin
-	@echo "{" >$@; hexdump -f hex $^ >>$@; echo "};" >>$@
diff --git a/tools/edid/edid.S b/tools/edid/edid.S
deleted file mode 100644
index c3d13815526d..000000000000
--- a/tools/edid/edid.S
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
-   edid.S: EDID data template
-
-   Copyright (C) 2012 Carsten Emde <C.Emde@xxxxxxxxx>
-
-   This program is free software; you can redistribute it and/or
-   modify it under the terms of the GNU General Public License
-   as published by the Free Software Foundation; either version 2
-   of the License, or (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA.
-*/
-
-
-/* Manufacturer */
-#define MFG_LNX1 'L'
-#define MFG_LNX2 'N'
-#define MFG_LNX3 'X'
-#define SERIAL 0
-#define YEAR 2012
-#define WEEK 5
-
-/* EDID 1.3 standard definitions */
-#define XY_RATIO_16_10	0b00
-#define XY_RATIO_4_3	0b01
-#define XY_RATIO_5_4	0b10
-#define XY_RATIO_16_9	0b11
-
-/* Provide defaults for the timing bits */
-#ifndef ESTABLISHED_TIMING1_BITS
-#define ESTABLISHED_TIMING1_BITS 0x00
-#endif
-#ifndef ESTABLISHED_TIMING2_BITS
-#define ESTABLISHED_TIMING2_BITS 0x00
-#endif
-#ifndef ESTABLISHED_TIMING3_BITS
-#define ESTABLISHED_TIMING3_BITS 0x00
-#endif
-
-#define mfgname2id(v1,v2,v3) \
-	((((v1-'@')&0x1f)<<10)+(((v2-'@')&0x1f)<<5)+((v3-'@')&0x1f))
-#define swap16(v1) ((v1>>8)+((v1&0xff)<<8))
-#define lsbs2(v1,v2) (((v1&0x0f)<<4)+(v2&0x0f))
-#define msbs2(v1,v2) ((((v1>>8)&0x0f)<<4)+((v2>>8)&0x0f))
-#define msbs4(v1,v2,v3,v4) \
-	((((v1>>8)&0x03)<<6)+(((v2>>8)&0x03)<<4)+\
-	(((v3>>4)&0x03)<<2)+((v4>>4)&0x03))
-#define pixdpi2mm(pix,dpi) ((pix*25)/dpi)
-#define xsize pixdpi2mm(XPIX,DPI)
-#define ysize pixdpi2mm(YPIX,DPI)
-
-		.data
-
-/* Fixed header pattern */
-header:		.byte	0x00,0xff,0xff,0xff,0xff,0xff,0xff,0x00
-
-mfg_id:		.hword	swap16(mfgname2id(MFG_LNX1, MFG_LNX2, MFG_LNX3))
-
-prod_code:	.hword	0
-
-/* Serial number. 32 bits, little endian. */
-serial_number:	.long	SERIAL
-
-/* Week of manufacture */
-week:		.byte	WEEK
-
-/* Year of manufacture, less 1990. (1990-2245)
-   If week=255, it is the model year instead */
-year:		.byte	YEAR-1990
-
-version:	.byte	VERSION 	/* EDID version, usually 1 (for 1.3) */
-revision:	.byte	REVISION	/* EDID revision, usually 3 (for 1.3) */
-
-/* If Bit 7=1	Digital input. If set, the following bit definitions apply:
-     Bits 6-1	Reserved, must be 0
-     Bit 0	Signal is compatible with VESA DFP 1.x TMDS CRGB,
-		  1 pixel per clock, up to 8 bits per color, MSB aligned,
-   If Bit 7=0	Analog input. If clear, the following bit definitions apply:
-     Bits 6-5	Video white and sync levels, relative to blank
-		  00=+0.7/-0.3 V; 01=+0.714/-0.286 V;
-		  10=+1.0/-0.4 V; 11=+0.7/0 V
-   Bit 4	Blank-to-black setup (pedestal) expected
-   Bit 3	Separate sync supported
-   Bit 2	Composite sync (on HSync) supported
-   Bit 1	Sync on green supported
-   Bit 0	VSync pulse must be serrated when somposite or
-		  sync-on-green is used. */
-video_parms:	.byte	0x6d
-
-/* Maximum horizontal image size, in centimetres
-   (max 292 cm/115 in at 16:9 aspect ratio) */
-max_hor_size:	.byte	xsize/10
-
-/* Maximum vertical image size, in centimetres.
-   If either byte is 0, undefined (e.g. projector) */
-max_vert_size:	.byte	ysize/10
-
-/* Display gamma, minus 1, times 100 (range 1.00-3.5 */
-gamma:		.byte	120
-
-/* Bit 7	DPMS standby supported
-   Bit 6	DPMS suspend supported
-   Bit 5	DPMS active-off supported
-   Bits 4-3	Display type: 00=monochrome; 01=RGB colour;
-		  10=non-RGB multicolour; 11=undefined
-   Bit 2	Standard sRGB colour space. Bytes 25-34 must contain
-		  sRGB standard values.
-   Bit 1	Preferred timing mode specified in descriptor block 1.
-   Bit 0	GTF supported with default parameter values. */
-dsp_features:	.byte	0xea
-
-/* Chromaticity coordinates. */
-/* Red and green least-significant bits
-   Bits 7-6	Red x value least-significant 2 bits
-   Bits 5-4	Red y value least-significant 2 bits
-   Bits 3-2	Green x value lst-significant 2 bits
-   Bits 1-0	Green y value least-significant 2 bits */
-red_green_lsb:	.byte	0x5e
-
-/* Blue and white least-significant 2 bits */
-blue_white_lsb:	.byte	0xc0
-
-/* Red x value most significant 8 bits.
-   0-255 encodes 0-0.996 (255/256); 0-0.999 (1023/1024) with lsbits */
-red_x_msb:	.byte	0xa4
-
-/* Red y value most significant 8 bits */
-red_y_msb:	.byte	0x59
-
-/* Green x and y value most significant 8 bits */
-green_x_y_msb:	.byte	0x4a,0x98
-
-/* Blue x and y value most significant 8 bits */
-blue_x_y_msb:	.byte	0x25,0x20
-
-/* Default white point x and y value most significant 8 bits */
-white_x_y_msb:	.byte	0x50,0x54
-
-/* Established timings */
-/* Bit 7	720x400 @ 70 Hz
-   Bit 6	720x400 @ 88 Hz
-   Bit 5	640x480 @ 60 Hz
-   Bit 4	640x480 @ 67 Hz
-   Bit 3	640x480 @ 72 Hz
-   Bit 2	640x480 @ 75 Hz
-   Bit 1	800x600 @ 56 Hz
-   Bit 0	800x600 @ 60 Hz */
-estbl_timing1:	.byte	ESTABLISHED_TIMING1_BITS
-
-/* Bit 7	800x600 @ 72 Hz
-   Bit 6	800x600 @ 75 Hz
-   Bit 5	832x624 @ 75 Hz
-   Bit 4	1024x768 @ 87 Hz, interlaced (1024x768)
-   Bit 3	1024x768 @ 60 Hz
-   Bit 2	1024x768 @ 72 Hz
-   Bit 1	1024x768 @ 75 Hz
-   Bit 0	1280x1024 @ 75 Hz */
-estbl_timing2:	.byte	ESTABLISHED_TIMING2_BITS
-
-/* Bit 7	1152x870 @ 75 Hz (Apple Macintosh II)
-   Bits 6-0 	Other manufacturer-specific display mod */
-estbl_timing3:	.byte	ESTABLISHED_TIMING3_BITS
-
-/* Standard timing */
-/* X resolution, less 31, divided by 8 (256-2288 pixels) */
-std_xres:	.byte	(XPIX/8)-31
-/* Y resolution, X:Y pixel ratio
-   Bits 7-6	X:Y pixel ratio: 00=16:10; 01=4:3; 10=5:4; 11=16:9.
-   Bits 5-0	Vertical frequency, less 60 (60-123 Hz) */
-std_vres:	.byte	(XY_RATIO<<6)+VFREQ-60
-		.fill	7,2,0x0101	/* Unused */
-
-descriptor1:
-/* Pixel clock in 10 kHz units. (0.-655.35 MHz, little-endian) */
-clock:		.hword	CLOCK/10
-
-/* Horizontal active pixels 8 lsbits (0-4095) */
-x_act_lsb:	.byte	XPIX&0xff
-/* Horizontal blanking pixels 8 lsbits (0-4095)
-   End of active to start of next active. */
-x_blk_lsb:	.byte	XBLANK&0xff
-/* Bits 7-4 	Horizontal active pixels 4 msbits
-   Bits 3-0	Horizontal blanking pixels 4 msbits */
-x_msbs:		.byte	msbs2(XPIX,XBLANK)
-
-/* Vertical active lines 8 lsbits (0-4095) */
-y_act_lsb:	.byte	YPIX&0xff
-/* Vertical blanking lines 8 lsbits (0-4095) */
-y_blk_lsb:	.byte	YBLANK&0xff
-/* Bits 7-4 	Vertical active lines 4 msbits
-   Bits 3-0 	Vertical blanking lines 4 msbits */
-y_msbs:		.byte	msbs2(YPIX,YBLANK)
-
-/* Horizontal sync offset pixels 8 lsbits (0-1023) From blanking start */
-x_snc_off_lsb:	.byte	XOFFSET&0xff
-/* Horizontal sync pulse width pixels 8 lsbits (0-1023) */
-x_snc_pls_lsb:	.byte	XPULSE&0xff
-/* Bits 7-4 	Vertical sync offset lines 4 lsbits (0-63)
-   Bits 3-0 	Vertical sync pulse width lines 4 lsbits (0-63) */
-y_snc_lsb:	.byte	lsbs2(YOFFSET, YPULSE)
-/* Bits 7-6 	Horizontal sync offset pixels 2 msbits
-   Bits 5-4 	Horizontal sync pulse width pixels 2 msbits
-   Bits 3-2 	Vertical sync offset lines 2 msbits
-   Bits 1-0 	Vertical sync pulse width lines 2 msbits */
-xy_snc_msbs:	.byte	msbs4(XOFFSET,XPULSE,YOFFSET,YPULSE)
-
-/* Horizontal display size, mm, 8 lsbits (0-4095 mm, 161 in) */
-x_dsp_size:	.byte	xsize&0xff
-
-/* Vertical display size, mm, 8 lsbits (0-4095 mm, 161 in) */
-y_dsp_size:	.byte	ysize&0xff
-
-/* Bits 7-4 	Horizontal display size, mm, 4 msbits
-   Bits 3-0 	Vertical display size, mm, 4 msbits */
-dsp_size_mbsb:	.byte	msbs2(xsize,ysize)
-
-/* Horizontal border pixels (each side; total is twice this) */
-x_border:	.byte	0
-/* Vertical border lines (each side; total is twice this) */
-y_border:	.byte	0
-
-/* Bit 7 	Interlaced
-   Bits 6-5 	Stereo mode: 00=No stereo; other values depend on bit 0:
-   Bit 0=0: 01=Field sequential, sync=1 during right; 10=similar,
-     sync=1 during left; 11=4-way interleaved stereo
-   Bit 0=1 2-way interleaved stereo: 01=Right image on even lines;
-     10=Left image on even lines; 11=side-by-side
-   Bits 4-3 	Sync type: 00=Analog composite; 01=Bipolar analog composite;
-     10=Digital composite (on HSync); 11=Digital separate
-   Bit 2 	If digital separate: Vertical sync polarity (1=positive)
-   Other types: VSync serrated (HSync during VSync)
-   Bit 1 	If analog sync: Sync on all 3 RGB lines (else green only)
-   Digital: HSync polarity (1=positive)
-   Bit 0 	2-way line-interleaved stereo, if bits 4-3 are not 00. */
-features:	.byte	0x18+(VSYNC_POL<<2)+(HSYNC_POL<<1)
-
-descriptor2:	.byte	0,0	/* Not a detailed timing descriptor */
-		.byte	0	/* Must be zero */
-		.byte	0xff	/* Descriptor is monitor serial number (text) */
-		.byte	0	/* Must be zero */
-start1:		.ascii	"Linux #0"
-end1:		.byte	0x0a	/* End marker */
-		.fill	12-(end1-start1), 1, 0x20 /* Padded spaces */
-descriptor3:	.byte	0,0	/* Not a detailed timing descriptor */
-		.byte	0	/* Must be zero */
-		.byte	0xfd	/* Descriptor is monitor range limits */
-		.byte	0	/* Must be zero */
-start2:		.byte	VFREQ-1	/* Minimum vertical field rate (1-255 Hz) */
-		.byte	VFREQ+1	/* Maximum vertical field rate (1-255 Hz) */
-		.byte	(CLOCK/(XPIX+XBLANK))-1 /* Minimum horizontal line rate
-						    (1-255 kHz) */
-		.byte	(CLOCK/(XPIX+XBLANK))+1 /* Maximum horizontal line rate
-						    (1-255 kHz) */
-		.byte	(CLOCK/10000)+1	/* Maximum pixel clock rate, rounded up
-					   to 10 MHz multiple (10-2550 MHz) */
-		.byte	0	/* No extended timing information type */
-end2:		.byte	0x0a	/* End marker */
-		.fill	12-(end2-start2), 1, 0x20 /* Padded spaces */
-descriptor4:	.byte	0,0	/* Not a detailed timing descriptor */
-		.byte	0	/* Must be zero */
-		.byte	0xfc	/* Descriptor is text */
-		.byte	0	/* Must be zero */
-start3:		.ascii	TIMING_NAME
-end3:		.byte	0x0a	/* End marker */
-		.fill	12-(end3-start3), 1, 0x20 /* Padded spaces */
-extensions:	.byte	0	/* Number of extensions to follow */
-checksum:	.byte	CRC	/* Sum of all bytes must be 0 */
diff --git a/tools/edid/hex b/tools/edid/hex
deleted file mode 100644
index 8873ebb618af..000000000000
--- a/tools/edid/hex
+++ /dev/null
@@ -1 +0,0 @@
-"\t" 8/1 "0x%02x, " "\n"
-- 
2.43.2




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux