On Sat, 3 Feb 2024 10:52:49 -0600
Adam Ford <aford173@xxxxxxxxx> wrote:
> From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
>
> The HDMI TX controller on the i.MX8MP SoC is a Synopsys designware IP
> core with a little bit of SoC integration around it.
>
> Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
[...]
> +examples:
> + - |
> + #include <dt-bindings/clock/imx8mp-clock.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/power/imx8mp-power.h>
> +
> + hdmi@32fd8000 {
> + compatible = "fsl,imx8mp-hdmi-tx";
> + reg = <0x32fd8000 0x7eff>;
> + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MP_CLK_HDMI_APB>,
> + <&clk IMX8MP_CLK_HDMI_REF_266M>,
> + <&clk IMX8MP_CLK_32K>,
> + <&hdmi_tx_phy>;
> + clock-names = "iahb", "isfr", "cec", "pix";
> + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>;
> + reg-io-width = <1>;
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + port@0 {
> + reg = <0>;
> +
> + hdmi_tx_from_pvi: endpoint {
> + remote-endpoint = <&pvi_to_hdmi_tx>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + hdmi_tx_out: endpoint {
Two excess indenting spaces on this line (port@0 is correct).
Also, I think there should an empty line between properties and nodes.
With these fixed:
Reviewed-by: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
Luca
--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
