[PATCH 4/8] arm64: dts: qcom: msm8976: Add MDSS nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add MDSS nodes to support displays on MSM8976 SoC.

Signed-off-by: Adam Skladowski <a39.skl@xxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/msm8976.dtsi | 268 +++++++++++++++++++++++++-
 1 file changed, 264 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
index 118174cfd4d3..2d71ce34f00e 100644
--- a/arch/arm64/boot/dts/qcom/msm8976.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi
@@ -785,10 +785,10 @@ gcc: clock-controller@1800000 {
 
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>;
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi1_phy 0>;
 			clock-names = "xo",
 				      "xo_a",
 				      "dsi0pll",
@@ -808,6 +808,266 @@ tcsr: syscon@1937000 {
 			reg = <0x01937000 0x30000>;
 		};
 
+		mdss: display-subsystem@1a00000 {
+			compatible = "qcom,mdss";
+
+			reg = <0x01a00000 0x1000>,
+			      <0x01ab0000 0x3000>;
+			reg-names = "mdss_phys", "vbif_phys";
+
+			power-domains = <&gcc MDSS_GDSC>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				  <&gcc GCC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync",
+				      "core";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@1a01000 {
+				compatible = "qcom,msm8976-mdp5", "qcom,mdp5";
+				reg = <0x01a01000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>,
+					 <&gcc GCC_MDP_TBU_CLK>,
+					 <&gcc GCC_MDP_RT_TBU_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync",
+					      "tbu",
+					      "tbu_rt";
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&gcc MDSS_GDSC>;
+
+				iommus = <&apps_iommu 22>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_mdp5_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_mdp5_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-177780000 {
+						opp-hz = /bits/ 64 <177780000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+
+					opp-320000000 {
+						opp-hz = /bits/ 64 <320000000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+					opp-360000000 {
+						opp-hz = /bits/ 64 <360000000>;
+						required-opps = <&rpmpd_opp_turbo>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@1a94000 {
+				compatible = "qcom,msm8976-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x01a94000 0x25c>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+
+				assigned-clocks = <&gcc GCC_MDSS_BYTE0_CLK_SRC>,
+						  <&gcc GCC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				phys = <&mdss_dsi0_phy>;
+
+				operating-points-v2 = <&dsi0_opp_table>;
+				power-domains = <&gcc MDSS_GDSC>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdss_mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				dsi0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-125000000 {
+						opp-hz = /bits/ 64 <125000000>;
+						required-opps = <&rpmpd_opp_svs>;
+
+					};
+
+					opp-161250000 {
+						opp-hz = /bits/ 64 <161250000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi1: dsi@1a96000 {
+				compatible = "qcom,msm8976-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x01a96000 0x300>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE1_CLK>,
+					 <&gcc GCC_MDSS_PCLK1_CLK>,
+					 <&gcc GCC_MDSS_ESC1_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+
+				assigned-clocks = <&gcc GCC_MDSS_BYTE1_CLK_SRC>,
+						  <&gcc GCC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
+
+				phys = <&mdss_dsi1_phy>;
+
+				power-domains = <&gcc MDSS_GDSC>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&mdss_mdp5_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@1a94a00 {
+				compatible = "qcom,dsi-phy-28nm-hpm-fam-b";
+				reg = <0x01a94a00 0xd4>,
+				      <0x01a94400 0x280>,
+				      <0x01a94b80 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1_phy: phy@1a96a00 {
+				compatible = "qcom,dsi-phy-28nm-hpm-fam-b";
+				reg = <0x01a96a00 0xd4>,
+				      <0x01a96400 0x280>,
+				      <0x01a96b80 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
 		apps_iommu: iommu@1e20000 {
 			compatible = "qcom,msm8976-iommu", "qcom,msm-iommu-v2";
 			ranges  = <0 0x01e20000 0x20000>;
-- 
2.43.0




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux