Avoid forward declarations in subsequent changes, but separate this
movement to an independent change.
Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
---
include/drm/drm_print.h | 190 ++++++++++++++++++++--------------------
1 file changed, 95 insertions(+), 95 deletions(-)
diff --git a/include/drm/drm_print.h b/include/drm/drm_print.h
index 1040213d02a4..b8b4cb9bb878 100644
--- a/include/drm/drm_print.h
+++ b/include/drm/drm_print.h
@@ -69,6 +69,101 @@ extern unsigned long __drm_debug;
* }
*/
+/**
+ * enum drm_debug_category - The DRM debug categories
+ *
+ * Each of the DRM debug logging macros use a specific category, and the logging
+ * is filtered by the drm.debug module parameter. This enum specifies the values
+ * for the interface.
+ *
+ * Each DRM_DEBUG_<CATEGORY> macro logs to DRM_UT_<CATEGORY> category, except
+ * DRM_DEBUG() logs to DRM_UT_CORE.
+ *
+ * Enabling verbose debug messages is done through the drm.debug parameter, each
+ * category being enabled by a bit:
+ *
+ * - drm.debug=0x1 will enable CORE messages
+ * - drm.debug=0x2 will enable DRIVER messages
+ * - drm.debug=0x3 will enable CORE and DRIVER messages
+ * - ...
+ * - drm.debug=0x1ff will enable all messages
+ *
+ * An interesting feature is that it's possible to enable verbose logging at
+ * run-time by echoing the debug value in its sysfs node::
+ *
+ * # echo 0xf > /sys/module/drm/parameters/debug
+ *
+ */
+enum drm_debug_category {
+ /* These names must match those in DYNAMIC_DEBUG_CLASSBITS */
+ /**
+ * @DRM_UT_CORE: Used in the generic drm code: drm_ioctl.c, drm_mm.c,
+ * drm_memory.c, ...
+ */
+ DRM_UT_CORE,
+ /**
+ * @DRM_UT_DRIVER: Used in the vendor specific part of the driver: i915,
+ * radeon, ... macro.
+ */
+ DRM_UT_DRIVER,
+ /**
+ * @DRM_UT_KMS: Used in the modesetting code.
+ */
+ DRM_UT_KMS,
+ /**
+ * @DRM_UT_PRIME: Used in the prime code.
+ */
+ DRM_UT_PRIME,
+ /**
+ * @DRM_UT_ATOMIC: Used in the atomic code.
+ */
+ DRM_UT_ATOMIC,
+ /**
+ * @DRM_UT_VBL: Used for verbose debug message in the vblank code.
+ */
+ DRM_UT_VBL,
+ /**
+ * @DRM_UT_STATE: Used for verbose atomic state debugging.
+ */
+ DRM_UT_STATE,
+ /**
+ * @DRM_UT_LEASE: Used in the lease code.
+ */
+ DRM_UT_LEASE,
+ /**
+ * @DRM_UT_DP: Used in the DP code.
+ */
+ DRM_UT_DP,
+ /**
+ * @DRM_UT_DRMRES: Used in the drm managed resources code.
+ */
+ DRM_UT_DRMRES
+};
+
+static inline bool drm_debug_enabled_raw(enum drm_debug_category category)
+{
+ return unlikely(__drm_debug & BIT(category));
+}
+
+#define drm_debug_enabled_instrumented(category) \
+ ({ \
+ pr_debug("todo: is this frequent enough to optimize ?\n"); \
+ drm_debug_enabled_raw(category); \
+ })
+
+#if defined(CONFIG_DRM_USE_DYNAMIC_DEBUG)
+/*
+ * the drm.debug API uses dyndbg, so each drm_*dbg macro/callsite gets
+ * a descriptor, and only enabled callsites are reachable. They use
+ * the private macro to avoid re-testing the enable-bit.
+ */
+#define __drm_debug_enabled(category) true
+#define drm_debug_enabled(category) drm_debug_enabled_instrumented(category)
+#else
+#define __drm_debug_enabled(category) drm_debug_enabled_raw(category)
+#define drm_debug_enabled(category) drm_debug_enabled_raw(category)
+#endif
+
/**
* struct drm_printer - drm output "stream"
*
@@ -255,101 +350,6 @@ static inline struct drm_printer drm_err_printer(struct drm_device *drm,
return p;
}
-/**
- * enum drm_debug_category - The DRM debug categories
- *
- * Each of the DRM debug logging macros use a specific category, and the logging
- * is filtered by the drm.debug module parameter. This enum specifies the values
- * for the interface.
- *
- * Each DRM_DEBUG_<CATEGORY> macro logs to DRM_UT_<CATEGORY> category, except
- * DRM_DEBUG() logs to DRM_UT_CORE.
- *
- * Enabling verbose debug messages is done through the drm.debug parameter, each
- * category being enabled by a bit:
- *
- * - drm.debug=0x1 will enable CORE messages
- * - drm.debug=0x2 will enable DRIVER messages
- * - drm.debug=0x3 will enable CORE and DRIVER messages
- * - ...
- * - drm.debug=0x1ff will enable all messages
- *
- * An interesting feature is that it's possible to enable verbose logging at
- * run-time by echoing the debug value in its sysfs node::
- *
- * # echo 0xf > /sys/module/drm/parameters/debug
- *
- */
-enum drm_debug_category {
- /* These names must match those in DYNAMIC_DEBUG_CLASSBITS */
- /**
- * @DRM_UT_CORE: Used in the generic drm code: drm_ioctl.c, drm_mm.c,
- * drm_memory.c, ...
- */
- DRM_UT_CORE,
- /**
- * @DRM_UT_DRIVER: Used in the vendor specific part of the driver: i915,
- * radeon, ... macro.
- */
- DRM_UT_DRIVER,
- /**
- * @DRM_UT_KMS: Used in the modesetting code.
- */
- DRM_UT_KMS,
- /**
- * @DRM_UT_PRIME: Used in the prime code.
- */
- DRM_UT_PRIME,
- /**
- * @DRM_UT_ATOMIC: Used in the atomic code.
- */
- DRM_UT_ATOMIC,
- /**
- * @DRM_UT_VBL: Used for verbose debug message in the vblank code.
- */
- DRM_UT_VBL,
- /**
- * @DRM_UT_STATE: Used for verbose atomic state debugging.
- */
- DRM_UT_STATE,
- /**
- * @DRM_UT_LEASE: Used in the lease code.
- */
- DRM_UT_LEASE,
- /**
- * @DRM_UT_DP: Used in the DP code.
- */
- DRM_UT_DP,
- /**
- * @DRM_UT_DRMRES: Used in the drm managed resources code.
- */
- DRM_UT_DRMRES
-};
-
-static inline bool drm_debug_enabled_raw(enum drm_debug_category category)
-{
- return unlikely(__drm_debug & BIT(category));
-}
-
-#define drm_debug_enabled_instrumented(category) \
- ({ \
- pr_debug("todo: is this frequent enough to optimize ?\n"); \
- drm_debug_enabled_raw(category); \
- })
-
-#if defined(CONFIG_DRM_USE_DYNAMIC_DEBUG)
-/*
- * the drm.debug API uses dyndbg, so each drm_*dbg macro/callsite gets
- * a descriptor, and only enabled callsites are reachable. They use
- * the private macro to avoid re-testing the enable-bit.
- */
-#define __drm_debug_enabled(category) true
-#define drm_debug_enabled(category) drm_debug_enabled_instrumented(category)
-#else
-#define __drm_debug_enabled(category) drm_debug_enabled_raw(category)
-#define drm_debug_enabled(category) drm_debug_enabled_raw(category)
-#endif
-
/*
* struct device based logging
*
--
2.39.2
