Some edp panel requires T10 (Delay from end of valid video data transmitted
by the Source device to power-off) less than 500ms. Using autosuspend with
delay set as 1000 violates this requirement.
Use put_sync_suspend in unprepare to meet the spec. For other cases (such
as getting EDID), it still uses autosuspend.
Suggested-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Fixes: 5f04e7ce392d ("drm/panel-edp: Split eDP panels out of panel-simple")
Signed-off-by: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
---
drivers/gpu/drm/panel/panel-edp.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index cd05c76868e3..7d556b1bfa82 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -429,8 +429,7 @@ static int panel_edp_unprepare(struct drm_panel *panel)
if (!p->prepared)
return 0;
- pm_runtime_mark_last_busy(panel->dev);
- ret = pm_runtime_put_autosuspend(panel->dev);
+ ret = pm_runtime_put_sync_suspend(panel->dev);
if (ret < 0)
return ret;
p->prepared = false;
--
2.43.0.472.g3155946c3a-goog
