Major changes in RFC v5: ------------------------ 1. Rebased on top of 'Abstract page from net stack' series and used the new netmem type to refer to LSB set pointers instead of re-using struct page. 2. Downgraded this series back to RFC and called it RFC v5. This is because this series is now dependent on 'Abstract page from net stack'[1] and the queue API. Both are removed from the series to pre-requisite work. 3. Reworked the page_pool devmem support to use netmem and for some more unified handling. 4. Reworked the reference counting of net_iov (renamed from page_pool_iov) to use pp_ref_count for refcounting. The full changes including the dependent series and GVE page pool support is here: https://github.com/mina/linux/commits/tcpdevmem-rfcv5/ [1] https://patchwork.kernel.org/project/netdevbpf/list/?series=810774 Major changes in v1: -------------------- 1. Implemented MVP queue API ndos to remove the userspace-visible driver reset. 2. Fixed issues in the napi_pp_put_page() devmem frag unref path. 3. Removed RFC tag. Many smaller addressed comments across all the patches (patches have individual change log). Full tree including the rest of the GVE driver changes: https://github.com/mina/linux/commits/tcpdevmem-v1 Changes in RFC v3: ------------------ 1. Pulled in the memory-provider dependency from Jakub's RFC[1] to make the series reviewable and mergable. 2. Implemented multi-rx-queue binding which was a todo in v2. 3. Fix to cmsg handling. The sticking point in RFC v2[2] was the device reset required to refill the device rx-queues after the dmabuf bind/unbind. The solution suggested as I understand is a subset of the per-queue management ops Jakub suggested or similar: https://lore.kernel.org/netdev/20230815171638.4c057dcd@xxxxxxxxxx/ This is not addressed in this revision, because: 1. This point was discussed at netconf & netdev and there is openness to using the current approach of requiring a device reset. 2. Implementing individual queue resetting seems to be difficult for my test bed with GVE. My prototype to test this ran into issues with the rx-queues not coming back up properly if reset individually. At the moment I'm unsure if it's a mistake in the POC or a genuine issue in the virtualization stack behind GVE, which currently doesn't test individual rx-queue restart. 3. Our usecases are not bothered by requiring a device reset to refill the buffer queues, and we'd like to support NICs that run into this limitation with resetting individual queues. My thought is that drivers that have trouble with per-queue configs can use the support in this series, while drivers that support new netdev ops to reset individual queues can automatically reset the queue as part of the dma-buf bind/unbind. The same approach with device resets is presented again for consideration with other sticking points addressed. This proposal includes the rx devmem path only proposed for merge. For a snapshot of my entire tree which includes the GVE POC page pool support & device memory support: https://github.com/torvalds/linux/compare/master...mina:linux:tcpdevmem-v3 [1] https://lore.kernel.org/netdev/f8270765-a27b-6ccf-33ea-cda097168d79@xxxxxxxxxx/T/ [2] https://lore.kernel.org/netdev/CAHS8izOVJGJH5WF68OsRWFKJid1_huzzUK+hpKbLcL4pSOD1Jw@xxxxxxxxxxxxxx/T/ Changes in RFC v2: ------------------ The sticking point in RFC v1[1] was the dma-buf pages approach we used to deliver the device memory to the TCP stack. RFC v2 is a proof-of-concept that attempts to resolve this by implementing scatterlist support in the networking stack, such that we can import the dma-buf scatterlist directly. This is the approach proposed at a high level here[2]. Detailed changes: 1. Replaced dma-buf pages approach with importing scatterlist into the page pool. 2. Replace the dma-buf pages centric API with a netlink API. 3. Removed the TX path implementation - there is no issue with implementing the TX path with scatterlist approach, but leaving out the TX path makes it easier to review. 4. Functionality is tested with this proposal, but I have not conducted perf testing yet. I'm not sure there are regressions, but I removed perf claims from the cover letter until they can be re-confirmed. 5. Added Signed-off-by: contributors to the implementation. 6. Fixed some bugs with the RX path since RFC v1. Any feedback welcome, but specifically the biggest pending questions needing feedback IMO are: 1. Feedback on the scatterlist-based approach in general. 2. Netlink API (Patch 1 & 2). 3. Approach to handle all the drivers that expect to receive pages from the page pool (Patch 6). [1] https://lore.kernel.org/netdev/dfe4bae7-13a0-3c5d-d671-f61b375cb0b4@xxxxxxxxx/T/ [2] https://lore.kernel.org/netdev/CAHS8izPm6XRS54LdCDZVd0C75tA1zHSu6jLVO8nzTLXCc=H7Nw@xxxxxxxxxxxxxx/ ---------------------- * TL;DR: Device memory TCP (devmem TCP) is a proposal for transferring data to and/or from device memory efficiently, without bouncing the data to a host memory buffer. * Problem: A large amount of data transfers have device memory as the source and/or destination. Accelerators drastically increased the volume of such transfers. Some examples include: - ML accelerators transferring large amounts of training data from storage into GPU/TPU memory. In some cases ML training setup time can be as long as 50% of TPU compute time, improving data transfer throughput & efficiency can help improving GPU/TPU utilization. - Distributed training, where ML accelerators, such as GPUs on different hosts, exchange data among them. - Distributed raw block storage applications transfer large amounts of data with remote SSDs, much of this data does not require host processing. Today, the majority of the Device-to-Device data transfers the network are implemented as the following low level operations: Device-to-Host copy, Host-to-Host network transfer, and Host-to-Device copy. The implementation is suboptimal, especially for bulk data transfers, and can put significant strains on system resources, such as host memory bandwidth, PCIe bandwidth, etc. One important reason behind the current state is the kernel’s lack of semantics to express device to network transfers. * Proposal: In this patch series we attempt to optimize this use case by implementing socket APIs that enable the user to: 1. send device memory across the network directly, and 2. receive incoming network packets directly into device memory. Packet _payloads_ go directly from the NIC to device memory for receive and from device memory to NIC for transmit. Packet _headers_ go to/from host memory and are processed by the TCP/IP stack normally. The NIC _must_ support header split to achieve this. Advantages: - Alleviate host memory bandwidth pressure, compared to existing network-transfer + device-copy semantics. - Alleviate PCIe BW pressure, by limiting data transfer to the lowest level of the PCIe tree, compared to traditional path which sends data through the root complex. * Patch overview: ** Part 1: netlink API Gives user ability to bind dma-buf to an RX queue. ** Part 2: scatterlist support Currently the standard for device memory sharing is DMABUF, which doesn't generate struct pages. On the other hand, networking stack (skbs, drivers, and page pool) operate on pages. We have 2 options: 1. Generate struct pages for dmabuf device memory, or, 2. Modify the networking stack to process scatterlist. ** part 3: page pool support We piggy back on page pool memory providers proposal: https://github.com/kuba-moo/linux/tree/pp-providers It allows the page pool to define a memory provider that provides the page allocation and freeing. It helps abstract most of the device memory TCP changes from the driver. ** part 4: support for unreadable skb frags Page pool iovs are not accessible by the host; we implement changes throughput the networking stack to correctly handle skbs with unreadable frags. ** Part 5: recvmsg() APIs We define user APIs for the user to send and receive device memory. Not included with this series is the GVE devmem TCP support, just to simplify the review. Code available here if desired: https://github.com/mina/linux/tree/tcpdevmem This series is built on top of net-next with Jakub's pp-providers changes cherry-picked. * NIC dependencies: 1. (strict) Devmem TCP require the NIC to support header split, i.e. the capability to split incoming packets into a header + payload and to put each into a separate buffer. Devmem TCP works by using device memory for the packet payload, and host memory for the packet headers. 2. (optional) Devmem TCP works better with flow steering support & RSS support, i.e. the NIC's ability to steer flows into certain rx queues. This allows the sysadmin to enable devmem TCP on a subset of the rx queues, and steer devmem TCP traffic onto these queues and non devmem TCP elsewhere. The NIC I have access to with these properties is the GVE with DQO support running in Google Cloud, but any NIC that supports these features would suffice. I may be able to help reviewers bring up devmem TCP on their NICs. * Testing: The series includes a udmabuf kselftest that show a simple use case of devmem TCP and validates the entire data path end to end without a dependency on a specific dmabuf provider. ** Test Setup Kernel: net-next with this series and memory provider API cherry-picked locally. Hardware: Google Cloud A3 VMs. NIC: GVE with header split & RSS & flow steering support. Cc: Pavel Begunkov <asml.silence@xxxxxxxxx> Cc: David Wei <dw@xxxxxxxxxxx> Cc: Jason Gunthorpe <jgg@xxxxxxxx> Cc: Yunsheng Lin <linyunsheng@xxxxxxxxxx> Cc: Shailend Chand <shailend@xxxxxxxxxx> Cc: Harshitha Ramamurthy <hramamurthy@xxxxxxxxxx> Cc: Shakeel Butt <shakeelb@xxxxxxxxxx> Cc: Jeroen de Borst <jeroendb@xxxxxxxxxx> Cc: Praveen Kaligineedi <pkaligineedi@xxxxxxxxxx> Jakub Kicinski (1): net: page_pool: create hooks for custom page providers Mina Almasry (13): net: page_pool: factor out page_pool recycle check net: netdev netlink api to bind dma-buf to a net device netdev: support binding dma-buf to netdevice netdev: netdevice devmem allocator page_pool: convert to use netmem page_pool: devmem support memory-provider: dmabuf devmem memory provider net: support non paged skb frags net: add support for skbs with unreadable frags tcp: RX path for devmem TCP net: add SO_DEVMEM_DONTNEED setsockopt to release RX frags net: add devmem TCP documentation selftests: add ncdevmem, netcat for devmem TCP Documentation/netlink/specs/netdev.yaml | 52 +++ Documentation/networking/devmem.rst | 271 +++++++++++++ Documentation/networking/index.rst | 1 + arch/alpha/include/uapi/asm/socket.h | 8 +- arch/mips/include/uapi/asm/socket.h | 6 + arch/parisc/include/uapi/asm/socket.h | 6 + arch/sparc/include/uapi/asm/socket.h | 6 + include/linux/skbuff.h | 68 +++- include/linux/socket.h | 1 + include/net/devmem.h | 127 ++++++ include/net/netdev_rx_queue.h | 1 + include/net/netmem.h | 223 ++++++++++- include/net/page_pool/helpers.h | 117 ++++-- include/net/page_pool/types.h | 27 +- include/net/sock.h | 2 + include/net/tcp.h | 5 +- include/trace/events/page_pool.h | 28 +- include/uapi/asm-generic/socket.h | 6 + include/uapi/linux/netdev.h | 19 + include/uapi/linux/uio.h | 14 + net/bpf/test_run.c | 5 +- net/core/datagram.c | 6 + net/core/dev.c | 314 ++++++++++++++- net/core/gro.c | 7 +- net/core/netdev-genl-gen.c | 19 + net/core/netdev-genl-gen.h | 2 + net/core/netdev-genl.c | 123 ++++++ net/core/page_pool.c | 419 +++++++++++++------- net/core/skbuff.c | 92 ++++- net/core/sock.c | 45 +++ net/ipv4/tcp.c | 196 +++++++++- net/ipv4/tcp_input.c | 13 +- net/ipv4/tcp_ipv4.c | 9 + net/ipv4/tcp_output.c | 5 +- net/packet/af_packet.c | 4 +- tools/include/uapi/linux/netdev.h | 19 + tools/testing/selftests/net/.gitignore | 1 + tools/testing/selftests/net/Makefile | 5 + tools/testing/selftests/net/ncdevmem.c | 489 ++++++++++++++++++++++++ 39 files changed, 2527 insertions(+), 234 deletions(-) create mode 100644 Documentation/networking/devmem.rst create mode 100644 include/net/devmem.h create mode 100644 tools/testing/selftests/net/ncdevmem.c -- 2.43.0.472.g3155946c3a-goog
