From: Andrzej Kacprowski <Andrzej.Kacprowski@xxxxxxxxx>
Using PCI Device ID/Revision to initialize the interrupt_clear_with_0
workaround is problematic - there are many pre-production
steppings with different behavior, even with the same PCI ID/Revision
Instead of checking for PCI Device ID/Revision, check the VPU
buttress interrupt status register behavior - if this register
is not zero after writing 1s it means there register is RW
instead of RW1C and we need to enable the interrupt_clear_with_0
workaround.
Fixes: 7f34e01f77f8 ("accel/ivpu: Clear specific interrupt status bits on C0")
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@xxxxxxxxx>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@xxxxxxxxxxxxxxx>
---
drivers/accel/ivpu/ivpu_hw_37xx.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/accel/ivpu/ivpu_hw_37xx.c b/drivers/accel/ivpu/ivpu_hw_37xx.c
index 4ccf1994b97a..d530384f8d60 100644
--- a/drivers/accel/ivpu/ivpu_hw_37xx.c
+++ b/drivers/accel/ivpu/ivpu_hw_37xx.c
@@ -53,10 +53,12 @@
#define ICB_0_1_IRQ_MASK ((((u64)ICB_1_IRQ_MASK) << 32) | ICB_0_IRQ_MASK)
-#define BUTTRESS_IRQ_MASK ((REG_FLD(VPU_37XX_BUTTRESS_INTERRUPT_STAT, FREQ_CHANGE)) | \
- (REG_FLD(VPU_37XX_BUTTRESS_INTERRUPT_STAT, ATS_ERR)) | \
+#define BUTTRESS_IRQ_MASK ((REG_FLD(VPU_37XX_BUTTRESS_INTERRUPT_STAT, ATS_ERR)) | \
(REG_FLD(VPU_37XX_BUTTRESS_INTERRUPT_STAT, UFI_ERR)))
+#define BUTTRESS_ALL_IRQ_MASK (BUTTRESS_IRQ_MASK | \
+ (REG_FLD(VPU_37XX_BUTTRESS_INTERRUPT_STAT, FREQ_CHANGE)))
+
#define BUTTRESS_IRQ_ENABLE_MASK ((u32)~BUTTRESS_IRQ_MASK)
#define BUTTRESS_IRQ_DISABLE_MASK ((u32)-1)
@@ -74,8 +76,12 @@ static void ivpu_hw_wa_init(struct ivpu_device *vdev)
vdev->wa.clear_runtime_mem = false;
vdev->wa.d3hot_after_power_off = true;
- if (ivpu_device_id(vdev) == PCI_DEVICE_ID_MTL && ivpu_revision(vdev) < 4)
+ REGB_WR32(VPU_37XX_BUTTRESS_INTERRUPT_STAT, BUTTRESS_ALL_IRQ_MASK);
+ if (REGB_RD32(VPU_37XX_BUTTRESS_INTERRUPT_STAT) == BUTTRESS_ALL_IRQ_MASK) {
+ /* Writing 1s does not clear the interrupt status register */
vdev->wa.interrupt_clear_with_0 = true;
+ REGB_WR32(VPU_37XX_BUTTRESS_INTERRUPT_STAT, 0x0);
+ }
IVPU_PRINT_WA(punit_disabled);
IVPU_PRINT_WA(clear_runtime_mem);
--
2.43.0
