Re: [PATCH v2 09/10] drm/bridge: tc358775: Add support for tc358765

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



>> The tc358775 bridge is pin compatible with earlier tc358765 according to
>> the tc358774xbg_datasheet_en_20190118.pdf documentation. Compared to the
>> tc358765, the tc358775 supports a STBY GPIO and higher data rates.
>>
>> The tc358765 has a register bit for video event mode vs video pulse mode.
>> We must set it to video event mode for the LCD output to work, and on the
>> tc358775, this bit no longer exists.
>>
>> Looks like the registers seem to match otherwise based on a quick glance
>> comparing the defines to the earlier Android kernel tc358765 driver.
>>
>> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
>> ---
>>  drivers/gpu/drm/bridge/tc358775.c | 26 ++++++++++++++++++++++----
>>  1 file changed, 22 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/bridge/tc358775.c b/drivers/gpu/drm/bridge/tc358775.c
>> --- a/drivers/gpu/drm/bridge/tc358775.c
>> +++ b/drivers/gpu/drm/bridge/tc358775.c
>> @@ -15,6 +15,7 @@
>>  #include <linux/kernel.h>
>>  #include <linux/media-bus-format.h>
>>  #include <linux/module.h>
>> +#include <linux/of_device.h>
>>  #include <linux/regulator/consumer.h>
>>  #include <linux/slab.h>
>>
>> @@ -107,6 +108,7 @@
>>  #define RDPKTLN         0x0404  /* Command Read Packet Length */
>>
>>  #define VPCTRL          0x0450  /* Video Path Control */
>> +#define EVTMODE                BIT(5)  /* Video event mode enable, tc35876x only */
>>  #define HTIM1           0x0454  /* Horizontal Timing Control 1 */
>>  #define HTIM2           0x0458  /* Horizontal Timing Control 2 */
>>  #define VTIM1           0x045C  /* Vertical Timing Control 1 */
>> @@ -254,6 +256,11 @@ enum tc358775_ports {
>>         TC358775_LVDS_OUT1,
>>  };
>>
>> +enum tc3587x5_type {
>> +       TC358765,
>
> I'd suggest adding = 1 or =0x65 so that the specified type differs
> from 'no data' = 0 / NULL.
>
>> +       TC358775,
>> +};
>> +
>>  struct tc_data {
>>         struct i2c_client       *i2c;
>>         struct device           *dev;
>> @@ -271,6 +278,8 @@ struct tc_data {
>>         struct gpio_desc        *stby_gpio;
>>         u8                      lvds_link; /* single-link or dual-link */
>>         u8                      bpc;
>> +
>> +       enum tc3587x5_type      type;
>>  };
>>
>>  static inline struct tc_data *bridge_to_tc(struct drm_bridge *b)
>> @@ -424,10 +433,16 @@ static void tc_bridge_enable(struct drm_bridge *bridge)
>>         d2l_write(tc->i2c, PPI_STARTPPI, PPI_START_FUNCTION);
>>         d2l_write(tc->i2c, DSI_STARTDSI, DSI_RX_START);
>>
>> +       /* Video event mode vs pulse mode bit, does not exist for tc358775 */
>> +       if (tc->type == TC358765)
>> +               val = EVTMODE;
>> +       else
>> +               val = 0;
>> +
>>         if (tc->bpc == 8)
>> -               val = TC358775_VPCTRL_OPXLFMT(1);
>> +               val |= TC358775_VPCTRL_OPXLFMT(1);
>>         else /* bpc = 6; */
>> -               val = TC358775_VPCTRL_MSF(1);
>> +               val |= TC358775_VPCTRL_MSF(1);
>>
>>         dsiclk = mode->crtc_clock * 3 * tc->bpc / tc->num_dsi_lanes / 1000;
>>         clkdiv = dsiclk / (tc->lvds_link == DUAL_LINK ? DIVIDE_BY_6 : DIVIDE_BY_3);
>> @@ -643,6 +658,7 @@ static int tc_probe(struct i2c_client *client)
>>
>>         tc->dev = dev;
>>         tc->i2c = client;
>> +       tc->type = (enum tc3587x5_type)of_device_get_match_data(dev);
>
> Would it make sense to use i2c_get_match_data() instead?

FWIW, I' planning to add a dsi binding for this driver. So I'd
suggest either the of_ or the device_ variant. Not sure though,
if the new device supports the DSI commands.

Otherwise, the patch looks good:

Reviewed-by: Michael Walle <mwalle@xxxxxxxxxx>

-michael

>
>>
>>         tc->panel_bridge = devm_drm_of_get_bridge(dev, dev->of_node,
>>                                                   TC358775_LVDS_OUT0, 0);
>> @@ -704,13 +720,15 @@ static void tc_remove(struct i2c_client *client)
>>  }
>>
>>  static const struct i2c_device_id tc358775_i2c_ids[] = {
>> -       { "tc358775", 0 },
>> +       { "tc358765", TC358765, },
>> +       { "tc358775", TC358775, },
>>         { }
>>  };
>>  MODULE_DEVICE_TABLE(i2c, tc358775_i2c_ids);
>>
>>  static const struct of_device_id tc358775_of_ids[] = {
>> -       { .compatible = "toshiba,tc358775", },
>> +       { .compatible = "toshiba,tc358765", .data = (void *)TC358765, },
>> +       { .compatible = "toshiba,tc358775", .data = (void *)TC358775, },
>>         { }
>>  };
>>  MODULE_DEVICE_TABLE(of, tc358775_of_ids);
>> --
>> 2.43.0



-- 
With best wishes
Dmitry




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux