On 08/11/2023 14:45, Alexander Stein wrote:
Hi Tomi,
Am Mittwoch, 8. November 2023, 12:27:21 CET schrieb Tomi Valkeinen:
These two patches are needed to make tc358767 work in the
DRM_BRIDGE_ATTACH_NO_CONNECTOR case, at least when using a DP connector.
I have tested this with TI AM654 EVM with a tc358767 add-on card
connected to a DP monitor.
Just a question regarding the usage of this DSI-DP bridge.
What is the state of the DSI lanes after the DSI host has been initialized,
but before calling atomic_pre_enable? AFAIK this bridge requires LP-11 on DSI
at any time for accessing the AUX channel.
Good question. I don't know, as we use it in DPI mode (DPI-DP bridge). I
guess the DSI state is undefined, as it might well be that the DSI host
driver's (pre-)enable is the place where the DSI is powered up and
initialized.
So you think in DSI mode this might fail, as AUX (possibly) won't work
when calling tc_get_edid()? We could add a check there, and skip the
tc_get_display_props() if in DSI mode. But tc_get_edid() surely won't
work then.
It would be good if someone with a board where tc358767 is used in DSI
mode could test this. But, of course, it'll only be testing that
particular DSI host behavior...
Tomi
Best regards,
Alexander
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
---
Changes in v2:
- Update the format negotiation patch as discussed in
https://lore.kernel.org/all/7ddf0edb-2925-4b7c-ad07-27c030dd0232@xxxxxx/ -
Link to v1:
https://lore.kernel.org/r/20231031-tc358767-v1-0-392081ad9f4b@ideasonboard.
com
---
Aradhya Bhatia (1):
drm/bridge: tc358767: Add format negotiation hooks for DPI/DSI to
(e)DP
Tomi Valkeinen (1):
drm/bridge: tc358767: Fix link properties discovery
drivers/gpu/drm/bridge/tc358767.c | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
---
base-commit: 9d7c8c066916f231ca0ed4e4fce6c4b58ca3e451
change-id: 20231031-tc358767-58e3ebdf95f0
Best regards,