Comment # 3
on bug 66767
from Martin Bednar
Created attachment 82844 [details]
dmesg after resume
dmesg output after a resume from suspend to ram. UVD initialization fails.
Output from 3.11-rc2. on a
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Madison
[Radeon HD 5000M Series]. Only happens if DPM is enabled.
short dmesg version (mainly radeon output after resume) :
[ 134.652348] [drm] PCIE GART of 512M enabled (table at 0x000000000025D000).
[ 134.652517] radeon 0000:01:00.0: WB enabled
[ 134.652520] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr
0x0000000040000c00 and cpu addr 0xffff88011160fc00
[ 134.652521] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr
0x0000000040000c0c and cpu addr 0xffff88011160fc0c
[ 134.653452] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr
0x000000000005c418 and cpu addr 0xffffc9000639c418
[ 134.670153] [drm] ring test on 0 succeeded in 1 usecs
[ 134.670213] [drm] ring test on 3 succeeded in 1 usecs
[ 134.723748] dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19
[ 134.723750] PM: Device 00:07 failed to resume: error -19
[ 134.962587] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 134.965908] ata6: SATA link down (SStatus 0 SControl 300)
[ 134.966739] ata2.00: configured for UDMA/100
[ 135.142469] sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't
fully claim to support it.
[ 135.142506] sdhci-pci 0000:03:00.4: Will use DMA mode even though HW doesn't
fully claim to support it.
[ 135.862145] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset
the VCPU!!!
[ 136.771646] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 136.781372] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 136.791321] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 136.791499] ata1.00: configured for UDMA/133
[ 136.804977] sd 0:0:0:0: [sda] Starting disk
[ 136.887420] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset
the VCPU!!!
[ 137.912701] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset
the VCPU!!!
[ 138.937981] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset
the VCPU!!!
[ 139.963255] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset
the VCPU!!!
[ 140.988548] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset
the VCPU!!!
[ 142.013843] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset
the VCPU!!!
[ 143.039117] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset
the VCPU!!!
[ 144.064413] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset
the VCPU!!!
[ 145.089696] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset
the VCPU!!!
[ 145.109806] [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!!
[ 145.109873] [drm:evergreen_startup] *ERROR* radeon: error initializing UVD
(-1).
[ 145.109874] [drm] Enabling audio support
[ 145.109933] [drm] ib test on ring 0 succeeded in 0 usecs
[ 145.109978] [drm] ib test on ring 3 succeeded in 1 usecs
[ 145.121521] switching from power state:
[ 145.121522] ui class: none
[ 145.121524] internal class: boot
[ 145.121525] caps: video
[ 145.121527] uvd vclk: 0 dclk: 0
[ 145.121529] power level 0 sclk: 45000 mclk: 79000 vddc: 950
vddci: 0
[ 145.121530] power level 1 sclk: 45000 mclk: 79000 vddc: 950
vddci: 0
[ 145.121531] power level 2 sclk: 45000 mclk: 79000 vddc: 950
vddci: 0
[ 145.121533] status: c b
[ 145.121533] switching to power state:
[ 145.121534] ui class: performance
[ 145.121535] internal class: none
[ 145.121536] caps: single_disp video
[ 145.121537] uvd vclk: 0 dclk: 0
[ 145.121538] power level 0 sclk: 15000 mclk: 15000 vddc: 900
vddci: 0
[ 145.121539] power level 1 sclk: 30000 mclk: 79000 vddc: 950
vddci: 0
[ 145.121540] power level 2 sclk: 45000 mclk: 79000 vddc: 950
vddci: 0
[ 145.121541] status: r
[ 150.307980] [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than
5secs aborting
[ 150.307982] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing
CBE6 (len 67, WS 0, PS 0) @ 0xCC15
[ 151.345217] PM: resume of devices complete after 16856.243 msecs
You are receiving this mail because:
- You are the assignee for the bug.
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel