Re: [RFC PATCH 1/3] drm/msm/dpu: add support for MSM8953

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 6 Oct 2023 at 19:26, Luca Weiss <luca@xxxxxxxxx> wrote:
>
> On Freitag, 6. Oktober 2023 15:38:51 CEST Dmitry Baryshkov wrote:
> > On 29/09/2023 23:52, Luca Weiss wrote:
> > > On Samstag, 23. September 2023 23:49:10 CEST Dmitry Baryshkov wrote:
> > >> Experimental support for MSM8953, which has MDP5 v1.16. It looks like
> > >> trimmed down version of MSM8996. Less SSPP, LM and PP blocks. No DSC,
> > >> etc.
> > >
> > > Hi Dmitry,
> > >
> > > As written on IRC, on sdm632-fairphone-fp3 with this DPU patches the
> > > screen is initializing and displaying stuff :) But there's some errors,
> > > which presumably are the reason that the screen is only updating a few
> > > times per second.
> > >
> > > [   22.774205] [drm:dpu_kms_hw_init:1164] dpu hardware revision:0x10100000
> > > [   23.099806] [drm:_dpu_encoder_phys_cmd_wait_for_ctl_start:657] [dpu
> > > error]enc31 intf1 ctl start interrupt wait failed [   23.099821]
> > > [drm:dpu_kms_wait_for_commit_done:495] [dpu error]wait for commit done
> > > returned -22
> > >
> > > These messages appear about 13 times per second but as I mentioned, the
> > > screen *is* updating (slowly) there.
> >
> > For my understanding, does it work with the MDP5 driver?
>
> Not perfectly, but it does work. What I mean is that the panel is running at
> 30Hz (shown e.g. with kmscube) instead of the 60Hz it should run at.

Interesting. If you have register dumps, it might be interesting to
compare them.
For DPU you can get them from debugfs/dri/0/kms. For MDP5 it is
necessary to hook snapshotting first. The patch will be appreciated
though ;-)

Also, the CTL timeouts look familiar to what we saw on the FP while
hacking it. I can suppose that it is a generic issue, just manifesting
more visibly on the older platforms.

>
> One of the comments I got is that mdp5 is essentially unmaintained so I should
> try DPU ;)

I'd say, it is mostly in the fixes-only mode.

> Also I can ask someone with a video-mode panel to test, maybe it works better
> there. At least good to have more data points?

Yes, please. Testing video panels would prove that the whole pipeline
is working and we have only CMD-related issues.

>
> Regards
> Luca
>
> >
> > > Also you for sure forgot to add "qcom,msm8953-mdp5" to the
> > > msm_mdp5_dpu_migration list, without this DPU is never even considered for
> > > 8953.


-- 
With best wishes
Dmitry



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux