Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@xxxxxxxxx>
---
drivers/gpu/drm/gma500/cdv_intel_display.c | 130 +----------------------------
1 file changed, 2 insertions(+), 128 deletions(-)
diff --git a/drivers/gpu/drm/gma500/cdv_intel_display.c b/drivers/gpu/drm/gma500/cdv_intel_display.c
index e30761a..2351f42 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_display.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_display.c
@@ -1035,132 +1035,6 @@ static void cdv_intel_crtc_restore(struct drm_crtc *crtc)
REG_WRITE(paletteReg + (i << 2), crtc_state->savePalette[i]);
}
-static int cdv_intel_crtc_cursor_set(struct drm_crtc *crtc,
- struct drm_file *file_priv,
- uint32_t handle,
- uint32_t width, uint32_t height)
-{
- struct drm_device *dev = crtc->dev;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int pipe = psb_intel_crtc->pipe;
- uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
- uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
- uint32_t temp;
- size_t addr = 0;
- struct gtt_range *gt;
- struct drm_gem_object *obj;
- int ret = 0;
-
- /* if we want to turn of the cursor ignore width and height */
- if (!handle) {
- /* turn off the cursor */
- temp = CURSOR_MODE_DISABLE;
-
- if (gma_power_begin(dev, false)) {
- REG_WRITE(control, temp);
- REG_WRITE(base, 0);
- gma_power_end(dev);
- }
-
- /* unpin the old GEM object */
- if (psb_intel_crtc->cursor_obj) {
- gt = container_of(psb_intel_crtc->cursor_obj,
- struct gtt_range, gem);
- psb_gtt_unpin(gt);
- drm_gem_object_unreference(psb_intel_crtc->cursor_obj);
- psb_intel_crtc->cursor_obj = NULL;
- }
-
- return 0;
- }
-
- /* Currently we only support 64x64 cursors */
- if (width != 64 || height != 64) {
- dev_dbg(dev->dev, "we currently only support 64x64 cursors\n");
- return -EINVAL;
- }
-
- obj = drm_gem_object_lookup(dev, file_priv, handle);
- if (!obj)
- return -ENOENT;
-
- if (obj->size < width * height * 4) {
- dev_dbg(dev->dev, "buffer is to small\n");
- ret = -ENOMEM;
- goto unref_cursor;
- }
-
- gt = container_of(obj, struct gtt_range, gem);
-
- /* Pin the memory into the GTT */
- ret = psb_gtt_pin(gt);
- if (ret) {
- dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle);
- goto unref_cursor;
- }
-
- addr = gt->offset; /* Or resource.start ??? */
-
- psb_intel_crtc->cursor_addr = addr;
-
- temp = 0;
- /* set the pipe for the cursor */
- temp |= (pipe << 28);
- temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
-
- if (gma_power_begin(dev, false)) {
- REG_WRITE(control, temp);
- REG_WRITE(base, addr);
- gma_power_end(dev);
- }
-
- /* unpin the old GEM object */
- if (psb_intel_crtc->cursor_obj) {
- gt = container_of(psb_intel_crtc->cursor_obj,
- struct gtt_range, gem);
- psb_gtt_unpin(gt);
- drm_gem_object_unreference(psb_intel_crtc->cursor_obj);
- }
-
- psb_intel_crtc->cursor_obj = obj;
- return ret;
-
-unref_cursor:
- drm_gem_object_unreference(obj);
- return ret;
-}
-
-static int cdv_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
-{
- struct drm_device *dev = crtc->dev;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int pipe = psb_intel_crtc->pipe;
- uint32_t temp = 0;
- uint32_t adder;
-
-
- if (x < 0) {
- temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT);
- x = -x;
- }
- if (y < 0) {
- temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT);
- y = -y;
- }
-
- temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT);
- temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
-
- adder = psb_intel_crtc->cursor_addr;
-
- if (gma_power_begin(dev, false)) {
- REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp);
- REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, adder);
- gma_power_end(dev);
- }
- return 0;
-}
-
static int cdv_crtc_set_config(struct drm_mode_set *set)
{
int ret = 0;
@@ -1331,8 +1205,8 @@ const struct drm_crtc_helper_funcs cdv_intel_helper_funcs = {
const struct drm_crtc_funcs cdv_intel_crtc_funcs = {
.save = cdv_intel_crtc_save,
.restore = cdv_intel_crtc_restore,
- .cursor_set = cdv_intel_crtc_cursor_set,
- .cursor_move = cdv_intel_crtc_cursor_move,
+ .cursor_set = gma_crtc_cursor_set,
+ .cursor_move = gma_crtc_cursor_move,
.gamma_set = gma_crtc_gamma_set,
.set_config = cdv_crtc_set_config,
.destroy = gma_crtc_destroy,
--
1.8.1.2
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
