Support IGT (Intel GPU Tools) in Mediatek DSI driver.
According to the description of MIPI Alliance Specification for D-PHY
Version 1.1, the maximum supported data rate is 1.5Gbps, so add mode_valid
callback to dsi bridge to filter out the data rate exceeding the
Specification.
Signed-off-by: Shuijing Li <shuijing.li@xxxxxxxxxxxx>
---
Changes in v2:
Correct descriptions of title and commit message.
---
drivers/gpu/drm/mediatek/mtk_dsi.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index 7d5250351193..a494e04f0ddf 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -806,6 +806,25 @@ static void mtk_dsi_bridge_atomic_post_disable(struct drm_bridge *bridge,
mtk_dsi_poweroff(dsi);
}
+static enum drm_mode_status
+mtk_dsi_bridge_mode_valid(struct drm_bridge *bridge,
+ const struct drm_display_info *info,
+ const struct drm_display_mode *mode)
+{
+ struct mtk_dsi *dsi = bridge_to_dsi(bridge);
+ u32 bpp;
+
+ if (dsi->format == MIPI_DSI_FMT_RGB565)
+ bpp = 16;
+ else
+ bpp = 24;
+
+ if (mode->clock * bpp / dsi->lanes > 1500000)
+ return MODE_CLOCK_HIGH;
+
+ return MODE_OK;
+}
+
static const struct drm_bridge_funcs mtk_dsi_bridge_funcs = {
.attach = mtk_dsi_bridge_attach,
.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
@@ -815,6 +834,7 @@ static const struct drm_bridge_funcs mtk_dsi_bridge_funcs = {
.atomic_pre_enable = mtk_dsi_bridge_atomic_pre_enable,
.atomic_post_disable = mtk_dsi_bridge_atomic_post_disable,
.atomic_reset = drm_atomic_helper_bridge_reset,
+ .mode_valid = mtk_dsi_bridge_mode_valid,
.mode_set = mtk_dsi_bridge_mode_set,
};
--
2.40.1
