The LPM102A188A is a 10.2" 2560x1800 IPS panel found in the Google Pixel C. Signed-off-by: Diogo Ivo <diogo.ivo@xxxxxxxxxxxxxxxxxx> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- Changes in v2: - removed the touch screen property Changes in v3: - add Reviewed-by from Krzysztof Kozlowski .../display/panel/jdi,lpm102a188a.yaml | 94 +++++++++++++++++++ 1 file changed, 94 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml new file mode 100644 index 000000000000..2f4d27a309a7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/jdi,lpm102a188a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: JDI LPM102A188A 2560x1800 10.2" DSI Panel + +maintainers: + - Diogo Ivo <diogo.ivo@xxxxxxxxxxxxxxxxxx> + +description: | + This panel requires a dual-channel DSI host to operate. It supports two modes: + - left-right: each channel drives the left or right half of the screen + - even-odd: each channel drives the even or odd lines of the screen + + Each of the DSI channels controls a separate DSI peripheral. The peripheral + driven by the first link (DSI-LINK1) is considered the primary peripheral + and controls the device. The 'link2' property contains a phandle to the + peripheral driven by the second link (DSI-LINK2). + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: jdi,lpm102a188a + + reg: true + enable-gpios: true + reset-gpios: true + power-supply: true + backlight: true + + ddi-supply: + description: The regulator that provides IOVCC (1.8V). + + link2: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + phandle to the DSI peripheral on the secondary link. Note that the + presence of this property marks the containing node as DSI-LINK1. + +required: + - compatible + - reg + +if: + required: + - link2 +then: + required: + - power-supply + - ddi-supply + - enable-gpios + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/gpio/tegra-gpio.h> + + dsia: dsi@54300000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x54300000 0x0 0x00040000>; + + link2: panel@0 { + compatible = "jdi,lpm102a188a"; + reg = <0>; + }; + }; + + dsib: dsi@54400000{ + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x54400000 0x0 0x00040000>; + nvidia,ganged-mode = <&dsia>; + + link1: panel@0 { + compatible = "jdi,lpm102a188a"; + reg = <0>; + power-supply = <&pplcd_vdd>; + ddi-supply = <&pp1800_lcdio>; + enable-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; + link2 = <&link2>; + backlight = <&backlight>; + }; + }; + +... -- 2.41.0
