On 8/4/23 17:10, Luca Ceresoli wrote:
This panel has been implemented in commit 225213f24c79 ("drm/panel-simple: Add Innolux G156HCE-L01 panel entry") with a higher clock than the typical one mentioned on the documentation to avoid flickering on the unit tested. Testing on a different unit shows that the panel actually works with the intended 70.93 MHz clock and even lower frequencies so the flickering is likely caused either by a defective unit or by other different components such as the bridge. Fixes: 225213f24c79 ("drm/panel-simple: Add Innolux G156HCE-L01 panel entry") Signed-off-by: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx> --- drivers/gpu/drm/panel/panel-simple.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 56854f78441e..ec3a73bbfe30 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -2379,7 +2379,7 @@ static const struct panel_desc innolux_g121x1_l03 = { };static const struct display_timing innolux_g156hce_l01_timings = {- .pixelclock = { 120000000, 144000000, 150000000 }, + .pixelclock = { 120000000, 141860000, 150000000 }, .hactive = { 1920, 1920, 1920 }, .hfront_porch = { 80, 90, 100 }, .hback_porch = { 80, 90, 100 },
Odd, now I don't see the flicker anymore. Tested-by: Marek Vasut <marex@xxxxxxx> # MX8MM with LT9211 Reviewed-by: Marek Vasut <marex@xxxxxxx> Thanks !
