Panfrost IRQ handler may stuck for a long time, for example this happens
when there is a bad HDMI connection and HDMI handler takes a long time to
finish processing, holding Panfrost. Make Panfrost's job timeout handler
to sync IRQ before checking fence signal status in order to prevent
spurious job timeouts due to a slow IRQ processing.
Reviewed-by: Steven Price <steven.price@xxxxxxx>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> # MediaTek MT8192 and MT8195 Chromebooks:
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>
---
Changelog:
v3: - Added comment to the code as was suggested by Boris
- Added r-b/t-b from Steven and Angelo
v2: - Moved synchronize_irq() after first signal-check to avoid unnecessary
blocking on syncing.
- Added warn message about high interrupt latency.
drivers/gpu/drm/panfrost/panfrost_job.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/gpu/drm/panfrost/panfrost_job.c b/drivers/gpu/drm/panfrost/panfrost_job.c
index dbc597ab46fb..ea1149354f9d 100644
--- a/drivers/gpu/drm/panfrost/panfrost_job.c
+++ b/drivers/gpu/drm/panfrost/panfrost_job.c
@@ -720,6 +720,21 @@ static enum drm_gpu_sched_stat panfrost_job_timedout(struct drm_sched_job
if (dma_fence_is_signaled(job->done_fence))
return DRM_GPU_SCHED_STAT_NOMINAL;
+ /*
+ * Panfrost IRQ handler may take long time to process if there is
+ * another IRQ handler hogging the processing. For example, HDMI
+ * may stuck in IRQ handler for a significant time in a case of bad
+ * cable connection. In order to catch such cases and not report
+ * spurious Panfrost job timeouts, synchronize the IRQ handler and
+ * re-check the fence status.
+ */
+ synchronize_irq(pfdev->js->irq);
+
+ if (dma_fence_is_signaled(job->done_fence)) {
+ dev_warn(pfdev->dev, "unexpectedly high interrupt latency\n");
+ return DRM_GPU_SCHED_STAT_NOMINAL;
+ }
+
dev_err(pfdev->dev, "gpu sched timeout, js=%d, config=0x%x, status=0x%x, head=0x%x, tail=0x%x, sched_job=%p",
js,
job_read(pfdev, JS_CONFIG(js)),
--
2.41.0
