Hi Sebastian, + Thomas sre@xxxxxxxxxx wrote on Fri, 14 Jul 2023 03:37:37 +0200: > Hi, > > This adds panel support for Inanbo T28CP45TN89, which I found inside of a > handheld thermal camera. The panel is based on the st7789v controller. All > information is based on reverse engineering. I also appended the series > from Miquel Raynal adding EDT ET028013DMA panel support, so that I could > easily test it with my SPI_NO_RX setup. They are slightly different due > to rebasing. Thanks a lot! I'll continue following the series and provide my help when required. Cheers, Miquèl > > Changes since PATCHv2: > * https://lore.kernel.org/all/20230422205012.2464933-1-sre@xxxxxxxxxx/ > * https://lore.kernel.org/all/20230616163255.2804163-1-miquel.raynal@xxxxxxxxxxx/ > * Add Rob Herring's R-b for the DT binding > * Make panel info "static const" > * Add Michael Riesch's R-b to all my patches > * Rebase to 6.5-rc1 > * Append Miquel's series > > Changes since PATCHv1: > * https://lore.kernel.org/all/20230317232355.1554980-1-sre@xxxxxxxxxx/ > * Apply DT binding changes requested by Krzysztof Kozlowski and his Ack > * I changed the driver patches to avoid code duplication and splitted > the code a bit more > > Greetings, > > -- Sebastian > > Miquel Raynal (6): > dt-bindings: display: st7789v: Add the edt,et028013dma panel > compatible > dt-bindings: display: st7789v: bound the number of Rx data lines > drm/panel: sitronix-st7789v: Use 9 bits per spi word by default > drm/panel: sitronix-st7789v: Clarify a definition > drm/panel: sitronix-st7789v: Add EDT ET028013DMA panel support > drm/panel: sitronix-st7789v: Check display ID > > Sebastian Reichel (13): > dt-bindings: vendor-prefixes: add Inanbo > dt-bindings: display: st7789v: add Inanbo T28CP45TN89 > drm/panel: sitronix-st7789v: add SPI ID table > drm/panel: sitronix-st7789v: remove unused constants > drm/panel: sitronix-st7789v: make reset GPIO optional > drm/panel: sitronix-st7789v: simplify st7789v_spi_write > drm/panel: sitronix-st7789v: improve error handling > drm/panel: sitronix-st7789v: avoid hardcoding mode info > drm/panel: sitronix-st7789v: avoid hardcoding panel size > drm/panel: sitronix-st7789v: add media bus format > drm/panel: sitronix-st7789v: avoid hardcoding invert mode > drm/panel: sitronix-st7789v: avoid hardcoding polarity info > drm/panel: sitronix-st7789v: add Inanbo T28CP45TN89 support > > .../display/panel/sitronix,st7789v.yaml | 10 +- > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > .../gpu/drm/panel/panel-sitronix-st7789v.c | 262 +++++++++++++++--- > 3 files changed, 237 insertions(+), 37 deletions(-) >
