Most aspeed devices have a BMC, which allows to remotely see the screen. Also in the common use case, those servers don't have a display connected. So add a Virtual connector, to reflect that even if no display is connected, the framebuffer can still be seen remotely. This prepares the work to implement a detect_ctx() for the Display port connector. Fixes: fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") Signed-off-by: Jocelyn Falempe <jfalempe@xxxxxxxxxx> --- drivers/gpu/drm/ast/ast_drv.h | 4 ++ drivers/gpu/drm/ast/ast_mode.c | 67 ++++++++++++++++++++++++++++++++++ 2 files changed, 71 insertions(+) diff --git a/drivers/gpu/drm/ast/ast_drv.h b/drivers/gpu/drm/ast/ast_drv.h index 3f6e0c984523..c9659e72002f 100644 --- a/drivers/gpu/drm/ast/ast_drv.h +++ b/drivers/gpu/drm/ast/ast_drv.h @@ -214,6 +214,10 @@ struct ast_device { struct drm_encoder encoder; struct drm_connector connector; } astdp; + struct { + struct drm_encoder encoder; + struct drm_connector connector; + } bmc; } output; bool support_wide_screen; diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c index f711d592da52..8896b22eb5cf 100644 --- a/drivers/gpu/drm/ast/ast_mode.c +++ b/drivers/gpu/drm/ast/ast_mode.c @@ -1735,6 +1735,70 @@ static int ast_astdp_output_init(struct ast_device *ast) return 0; } +/* + * BMC virtual Connector + */ + +static int ast_bmc_connector_helper_get_modes(struct drm_connector *connector) +{ + return drm_add_modes_noedid(connector, 1024, 768); +} + +static const struct drm_connector_helper_funcs ast_bmc_connector_helper_funcs = { + .get_modes = ast_bmc_connector_helper_get_modes, +}; + +static const struct drm_connector_funcs ast_bmc_connector_funcs = { + .reset = drm_atomic_helper_connector_reset, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static int ast_bmc_connector_init(struct drm_device *dev, + struct drm_connector *connector) +{ + int ret; + + ret = drm_connector_init(dev, connector, &ast_bmc_connector_funcs, + DRM_MODE_CONNECTOR_VIRTUAL); + if (ret) + return ret; + + drm_connector_helper_add(connector, &ast_bmc_connector_helper_funcs); + + connector->interlace_allowed = 0; + connector->doublescan_allowed = 0; + connector->polled = 0; + + return 0; +} + +static int ast_bmc_output_init(struct ast_device *ast) +{ + struct drm_device *dev = &ast->base; + struct drm_crtc *crtc = &ast->crtc; + struct drm_encoder *encoder = &ast->output.bmc.encoder; + struct drm_connector *connector = &ast->output.bmc.connector; + int ret; + + ret = drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_VIRTUAL); + if (ret) + return ret; + encoder->possible_crtcs = drm_crtc_mask(crtc); + + ret = ast_bmc_connector_init(dev, connector); + if (ret) + return ret; + + ret = drm_connector_attach_encoder(connector, encoder); + if (ret) + return ret; + + return 0; +} + /* * Mode config */ @@ -1842,6 +1906,9 @@ int ast_mode_config_init(struct ast_device *ast) if (ret) return ret; } + ret = ast_bmc_output_init(ast); + if (ret) + return ret; drm_mode_config_reset(dev); base-commit: b32d5a51f3c21843011d68a58e6ac0b897bce9f2 -- 2.41.0