RADEON / DPM: GPU cannot properly up-clock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



First of all thank you guys for pushing this out! Great work!

I tried the latest code in drm-next-3.11-wip (up to commit
b3c1e0c3ba885db44 “drm/radeon: fix endian issues in atombios dpm
code”) in connection with the latest radeon_ucode (latest update on
2013-06-26). I also reintroduced the debugfs info so that I can better
observe the gpu-settings. For this I put back the following patch:

diff --git a/drivers/gpu/drm/radeon/radeon_pm.c
b/drivers/gpu/drm/radeon/radeon_pm.c
index 7ba5d6f..9367234 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -1066,6 +1066,11 @@ static int radeon_pm_init_dpm(struct radeon_device *rdev)
         ret = device_create_file(rdev->dev, &dev_attr_power_method);
         if (ret)
             DRM_ERROR("failed to create device file for power method\n");
+
+        if (radeon_debugfs_pm_init(rdev)) {
+            DRM_ERROR("Failed to register debugfs file for PM!\n");
+        }
+
         DRM_INFO("radeon: dpm initialized\n");
     }

--
1.8.2.1

Everything works fine, however I think that my gpu (ati 6670, see
below) doesn't reclock properly (OR doesn't reclock at all). I
observed the gpu-temps and compared those with the readings when using
“profile” and “dynpm”. Usually (with dynpm) the temps stay low and
jump up when I start glxgears or any HD-movie. With the latest dpm my
temps and the gpu stay in the lowest profile all the time. It doesn't
reclock even if I start any demanding work like HD-Movie. Dmesg shows
this:

***
[    1.307529] == power state 0 ==
[    1.307530]  ui class: none
[    1.307531]  internal class: boot
[    1.307532]  caps:
[    1.307533]  uvd    vclk: 0 dclk: 0
[    1.307534]          power level 0    sclk: 10000 mclk: 15000 vddc:
900 vddci: 0
[    1.307535]          power level 1    sclk: 10000 mclk: 15000 vddc:
900 vddci: 0
[    1.307536]          power level 2    sclk: 10000 mclk: 15000 vddc:
900 vddci: 0
[    1.307537]  status: c r b
[    1.307538] == power state 1 ==
[    1.307539]  ui class: performance
[    1.307539]  internal class: none
[    1.307540]  caps:
[    1.307541]  uvd    vclk: 0 dclk: 0
[    1.307542]          power level 0    sclk: 10000 mclk: 15000 vddc:
900 vddci: 0
[    1.307543]          power level 1    sclk: 40000 mclk: 100000
vddc: 1100 vddci: 0
[    1.307544]          power level 2    sclk: 80000 mclk: 100000
vddc: 1100 vddci: 0
[    1.307544]  status:
[    1.307545] == power state 2 ==
[    1.307546]  ui class: none
[    1.307546]  internal class: uvd
[    1.307547]  caps: video
[    1.307549]  uvd    vclk: 70000 dclk: 56000
[    1.307549]          power level 0    sclk: 80000 mclk: 100000
vddc: 1100 vddci: 0
[    1.307550]          power level 1    sclk: 80000 mclk: 100000
vddc: 1100 vddci: 0
[    1.307551]          power level 2    sclk: 80000 mclk: 100000
vddc: 1100 vddci: 0
[    1.307552]  status:
[    1.311858] switching from power state:
[    1.311859]  ui class: none
[    1.311860]  internal class: boot
[    1.311860]  caps:
[    1.311861]  uvd    vclk: 0 dclk: 0
[    1.311862]          power level 0    sclk: 10000 mclk: 15000 vddc:
900 vddci: 0
[    1.311863]          power level 1    sclk: 10000 mclk: 15000 vddc:
900 vddci: 0
[    1.311864]          power level 2    sclk: 10000 mclk: 15000 vddc:
900 vddci: 0
[    1.311865]  status: c b
[    1.311866] switching to power state:
[    1.311866]  ui class: performance
[    1.311867]  internal class: none
[    1.311868]  caps:
[    1.311869]  uvd    vclk: 0 dclk: 0
[    1.311869]          power level 0    sclk: 10000 mclk: 15000 vddc:
900 vddci: 0
[    1.311870]          power level 1    sclk: 40000 mclk: 100000
vddc: 1100 vddci: 0
[    1.311871]          power level 2    sclk: 80000 mclk: 100000
vddc: 1100 vddci: 0
[    1.311872]  status: r

and later (other dmesg output is attached)

[    1.360509] switching from power state:
[    1.360510]  ui class: performance
[    1.360510]  internal class: none
[    1.360511]  caps:
[    1.360511]  uvd    vclk: 0 dclk: 0
[    1.360512]          power level 0    sclk: 10000 mclk: 15000 vddc:
900 vddci: 0
[    1.360512]          power level 1    sclk: 40000 mclk: 100000
vddc: 1100 vddci: 0
[    1.360513]          power level 2    sclk: 80000 mclk: 100000
vddc: 1100 vddci: 0
[    1.360513]  status: c r
[    1.360514] switching to power state:
[    1.360514]  ui class: performance
[    1.360515]  internal class: none
[    1.360515]  caps:
[    1.360515]  uvd    vclk: 0 dclk: 0
[    1.360516]          power level 0    sclk: 10000 mclk: 15000 vddc:
900 vddci: 0
[    1.360516]          power level 1    sclk: 40000 mclk: 100000
vddc: 1100 vddci: 0
[    1.360517]          power level 2    sclk: 80000 mclk: 100000
vddc: 1100 vddci: 0
[    1.360517]  status: c r

***
The radeon_pm_info shows all the time:

[root@localhost ~]# cat /sys/kernel/debug/dri/0/radeon_pm_info
default engine clock: 800000 kHz
current engine clock: 99990 kHz
default memory clock: 1000000 kHz
current memory clock: 150000 kHz
voltage: 1100 mV
PCIE lanes: 16

When using the “dynpm” settings I could see the voltage dropping back
to 900mV (as in performace, power level 0) but now it stays high all
the time. When playing a HD-Moving I can see the film in a
“slow-motion” which also confirms that the gpu doesn't reclock.
Setting dynpm reclocks fine and the HD-movie plays smoothly.

My gpu is:

01:00.0 VGA compatible controller: ATI Technologies Inc Turks XT [AMD
Radeon HD 6600 Series] (prog-if 00 [VGA controller])
        Subsystem: PC Partner Limited Device e194
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 56
        Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
        Region 2: Memory at fe620000 (64-bit, non-prefetchable) [size=128K]
        Region 4: I/O ports at e000 [size=256]
        Expansion ROM at fe600000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<4us, L1 unlimited
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+
AuxPwr- TransPend-
                LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1,
Latency L0 <64ns, L1 <1us
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Not Supported,
TimeoutDis-, LTR-, OBFF Not Supported
                DevCtl2: Completion Timeout: 50us to 50ms,
TimeoutDis-, LTR-, OBFF Disabled
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-,
LinkEqualizationRequest-
        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee0f00c  Data: 41d2
        Capabilities: [100 v1] Vendor Specific Information: ID=0001
Rev=1 Len=010 <?>
        Capabilities: [150 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
        Kernel driver in use: radeon

Can some take a look at this?

Thanks,
joshua

Attachment: dmesg
Description: Binary data

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux