From: Alex Deucher <alexander.deucher@xxxxxxx>
RLC handles the interrupt controller and other tasks
on the GPU.
v2: add documentation
v3: update programming sequence
v4: additional setup
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
---
drivers/gpu/drm/radeon/cik.c | 142 +++++++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/radeon/cikd.h | 47 ++++++++++++++
2 files changed, 189 insertions(+), 0 deletions(-)
diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c
index ba242eb..a44ede6 100644
--- a/drivers/gpu/drm/radeon/cik.c
+++ b/drivers/gpu/drm/radeon/cik.c
@@ -2777,3 +2777,145 @@ void cik_vm_flush(struct radeon_device *rdev, int ridx, struct radeon_vm *vm)
radeon_ring_write(ring, 0x0);
}
+/*
+ * RLC
+ * The RLC is a multi-purpose microengine that handles a
+ * variety of functions, the most important of which is
+ * the interrupt controller.
+ */
+/**
+ * cik_rlc_stop - stop the RLC ME
+ *
+ * @rdev: radeon_device pointer
+ *
+ * Halt the RLC ME (MicroEngine) (CIK).
+ */
+static void cik_rlc_stop(struct radeon_device *rdev)
+{
+ int i, j, k;
+ u32 mask, tmp;
+
+ tmp = RREG32(CP_INT_CNTL_RING0);
+ tmp &= ~(CNTX_BUSY_INT_ENABLE | CNTX_EMPTY_INT_ENABLE);
+ WREG32(CP_INT_CNTL_RING0, tmp);
+
+ RREG32(CB_CGTT_SCLK_CTRL);
+ RREG32(CB_CGTT_SCLK_CTRL);
+ RREG32(CB_CGTT_SCLK_CTRL);
+ RREG32(CB_CGTT_SCLK_CTRL);
+
+ tmp = RREG32(RLC_CGCG_CGLS_CTRL) & 0xfffffffc;
+ WREG32(RLC_CGCG_CGLS_CTRL, tmp);
+
+ WREG32(RLC_CNTL, 0);
+
+ for (i = 0; i < rdev->config.cik.max_shader_engines; i++) {
+ for (j = 0; j < rdev->config.cik.max_sh_per_se; j++) {
+ cik_select_se_sh(rdev, i, j);
+ for (k = 0; k < rdev->usec_timeout; k++) {
+ if (RREG32(RLC_SERDES_CU_MASTER_BUSY) == 0)
+ break;
+ udelay(1);
+ }
+ }
+ }
+ cik_select_se_sh(rdev, 0xffffffff, 0xffffffff);
+
+ mask = SE_MASTER_BUSY_MASK | GC_MASTER_BUSY | TC0_MASTER_BUSY | TC1_MASTER_BUSY;
+ for (k = 0; k < rdev->usec_timeout; k++) {
+ if ((RREG32(RLC_SERDES_NONCU_MASTER_BUSY) & mask) == 0)
+ break;
+ udelay(1);
+ }
+}
+
+/**
+ * cik_rlc_start - start the RLC ME
+ *
+ * @rdev: radeon_device pointer
+ *
+ * Unhalt the RLC ME (MicroEngine) (CIK).
+ */
+static void cik_rlc_start(struct radeon_device *rdev)
+{
+ u32 tmp;
+
+ WREG32(RLC_CNTL, RLC_ENABLE);
+
+ tmp = RREG32(CP_INT_CNTL_RING0);
+ tmp |= (CNTX_BUSY_INT_ENABLE | CNTX_EMPTY_INT_ENABLE);
+ WREG32(CP_INT_CNTL_RING0, tmp);
+
+ udelay(50);
+}
+
+/**
+ * cik_rlc_resume - setup the RLC hw
+ *
+ * @rdev: radeon_device pointer
+ *
+ * Initialize the RLC registers, load the ucode,
+ * and start the RLC (CIK).
+ * Returns 0 for success, -EINVAL if the ucode is not available.
+ */
+static int cik_rlc_resume(struct radeon_device *rdev)
+{
+ u32 i, size;
+ u32 clear_state_info[3];
+ const __be32 *fw_data;
+
+ if (!rdev->rlc_fw)
+ return -EINVAL;
+
+ switch (rdev->family) {
+ case CHIP_BONAIRE:
+ default:
+ size = BONAIRE_RLC_UCODE_SIZE;
+ break;
+ case CHIP_KAVERI:
+ size = KV_RLC_UCODE_SIZE;
+ break;
+ case CHIP_KABINI:
+ size = KB_RLC_UCODE_SIZE;
+ break;
+ }
+
+ cik_rlc_stop(rdev);
+
+ WREG32(GRBM_SOFT_RESET, SOFT_RESET_RLC);
+ RREG32(GRBM_SOFT_RESET);
+ udelay(50);
+ WREG32(GRBM_SOFT_RESET, 0);
+ RREG32(GRBM_SOFT_RESET);
+ udelay(50);
+
+ WREG32(RLC_LB_CNTR_INIT, 0);
+ WREG32(RLC_LB_CNTR_MAX, 0x00008000);
+
+ cik_select_se_sh(rdev, 0xffffffff, 0xffffffff);
+ WREG32(RLC_LB_INIT_CU_MASK, 0xffffffff);
+ WREG32(RLC_LB_PARAMS, 0x00600408);
+ WREG32(RLC_LB_CNTL, 0x80000004);
+
+ WREG32(RLC_MC_CNTL, 0);
+ WREG32(RLC_UCODE_CNTL, 0);
+
+ fw_data = (const __be32 *)rdev->rlc_fw->data;
+ WREG32(RLC_GPM_UCODE_ADDR, 0);
+ for (i = 0; i < size; i++)
+ WREG32(RLC_GPM_UCODE_DATA, be32_to_cpup(fw_data++));
+ WREG32(RLC_GPM_UCODE_ADDR, 0);
+
+ /* XXX */
+ clear_state_info[0] = 0;//upper_32_bits(rdev->rlc.save_restore_gpu_addr);
+ clear_state_info[1] = 0;//rdev->rlc.save_restore_gpu_addr;
+ clear_state_info[2] = 0;//cik_default_size;
+ WREG32(RLC_GPM_SCRATCH_ADDR, 0x3d);
+ for (i = 0; i < 3; i++)
+ WREG32(RLC_GPM_SCRATCH_DATA, clear_state_info[i]);
+ WREG32(RLC_DRIVER_DMA_STATUS, 0);
+
+ cik_rlc_start(rdev);
+
+ return 0;
+}
diff --git a/drivers/gpu/drm/radeon/cikd.h b/drivers/gpu/drm/radeon/cikd.h
index 783cf60..a116020 100644
--- a/drivers/gpu/drm/radeon/cikd.h
+++ b/drivers/gpu/drm/radeon/cikd.h
@@ -497,10 +497,55 @@
#define CP_MEC_ME2_UCODE_ADDR 0xC178
#define CP_MEC_ME2_UCODE_DATA 0xC17C
+#define CP_INT_CNTL_RING0 0xC1A8
+# define CNTX_BUSY_INT_ENABLE (1 << 19)
+# define CNTX_EMPTY_INT_ENABLE (1 << 20)
+# define PRIV_INSTR_INT_ENABLE (1 << 22)
+# define PRIV_REG_INT_ENABLE (1 << 23)
+# define TIME_STAMP_INT_ENABLE (1 << 26)
+# define CP_RINGID2_INT_ENABLE (1 << 29)
+# define CP_RINGID1_INT_ENABLE (1 << 30)
+# define CP_RINGID0_INT_ENABLE (1 << 31)
+
#define CP_MAX_CONTEXT 0xC2B8
#define CP_RB0_BASE_HI 0xC2C4
+#define RLC_CNTL 0xC300
+# define RLC_ENABLE (1 << 0)
+
+#define RLC_MC_CNTL 0xC30C
+
+#define RLC_LB_CNTR_MAX 0xC348
+
+#define RLC_LB_CNTL 0xC364
+
+#define RLC_LB_CNTR_INIT 0xC36C
+
+#define RLC_SAVE_AND_RESTORE_BASE 0xC374
+#define RLC_DRIVER_DMA_STATUS 0xC378
+
+#define RLC_GPM_UCODE_ADDR 0xC388
+#define RLC_GPM_UCODE_DATA 0xC38C
+
+#define RLC_UCODE_CNTL 0xC39C
+
+#define RLC_CGCG_CGLS_CTRL 0xC424
+
+#define RLC_LB_INIT_CU_MASK 0xC43C
+
+#define RLC_LB_PARAMS 0xC444
+
+#define RLC_SERDES_CU_MASTER_BUSY 0xC484
+#define RLC_SERDES_NONCU_MASTER_BUSY 0xC488
+# define SE_MASTER_BUSY_MASK 0x0000ffff
+# define GC_MASTER_BUSY (1 << 16)
+# define TC0_MASTER_BUSY (1 << 17)
+# define TC1_MASTER_BUSY (1 << 18)
+
+#define RLC_GPM_SCRATCH_ADDR 0xC4B0
+#define RLC_GPM_SCRATCH_DATA 0xC4B4
+
#define PA_SC_RASTER_CONFIG 0x28350
# define RASTER_CONFIG_RB_MAP_0 0
# define RASTER_CONFIG_RB_MAP_1 1
@@ -599,6 +644,8 @@
#define TCC_DISABLE_MASK 0xFFFF0000
#define TCC_DISABLE_SHIFT 16
+#define CB_CGTT_SCLK_CTRL 0x3c2a0
+
/*
* PM4
*/
--
1.7.7.5
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
