From: Alex Deucher <alexander.deucher@xxxxxxx>
v2: further updates
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
---
drivers/gpu/drm/radeon/atombios.h | 486 ++++++++++++++++++++++++++++++++++---
1 files changed, 454 insertions(+), 32 deletions(-)
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 0ee5737..f19d9a6 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -74,6 +74,8 @@
#define ATOM_PPLL2 1
#define ATOM_DCPLL 2
#define ATOM_PPLL0 2
+#define ATOM_PPLL3 3
+
#define ATOM_EXT_PLL1 8
#define ATOM_EXT_PLL2 9
#define ATOM_EXT_CLOCK 10
@@ -259,7 +261,7 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{
USHORT AdjustDisplayPll; //Atomic Table, used by various SW componentes.
USHORT AdjustMemoryController; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
USHORT EnableASIC_StaticPwrMgt; //Atomic Table, only used by Bios
- USHORT ASIC_StaticPwrMgtStatusChange; //Obsolete , only used by Bios
+ USHORT SetUniphyInstance; //Atomic Table, only used by Bios
USHORT DAC_LoadDetection; //Atomic Table, directly used by various SW components,latest version 1.2
USHORT LVTMAEncoderControl; //Atomic Table,directly used by various SW components,latest version 1.3
USHORT HW_Misc_Operation; //Atomic Table, directly used by various SW components,latest version 1.1
@@ -271,7 +273,7 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{
USHORT TVEncoderControl; //Function Table,directly used by various SW components,latest version 1.1
USHORT PatchMCSetting; //only used by BIOS
USHORT MC_SEQ_Control; //only used by BIOS
- USHORT TV1OutputControl; //Atomic Table, Obsolete from Ry6xx, use DAC2 Output instead
+ USHORT Gfx_Harvesting; //Atomic Table, Obsolete from Ry6xx, Now only used by BIOS for GFX harvesting
USHORT EnableScaler; //Atomic Table, used only by Bios
USHORT BlankCRTC; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT EnableCRTC; //Atomic Table, directly used by various SW components,latest version 1.1
@@ -328,7 +330,7 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{
#define UNIPHYTransmitterControl DIG1TransmitterControl
#define LVTMATransmitterControl DIG2TransmitterControl
#define SetCRTC_DPM_State GetConditionalGoldenSetting
-#define SetUniphyInstance ASIC_StaticPwrMgtStatusChange
+#define ASIC_StaticPwrMgtStatusChange SetUniphyInstance
#define HPDInterruptService ReadHWAssistedI2CStatus
#define EnableVGA_Access GetSCLKOverMCLKRatio
#define EnableYUV GetDispObjectInfo
@@ -338,7 +340,7 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{
#define TMDSAEncoderControl PatchMCSetting
#define LVDSEncoderControl MC_SEQ_Control
#define LCD1OutputControl HW_Misc_Operation
-
+#define TV1OutputControl Gfx_Harvesting
typedef struct _ATOM_MASTER_COMMAND_TABLE
{
@@ -478,11 +480,11 @@ typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3
typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4
{
#if ATOM_BIG_ENDIAN
- ULONG ucPostDiv; //return parameter: post divider which is used to program to register directly
+ ULONG ucPostDiv:8; //return parameter: post divider which is used to program to register directly
ULONG ulClock:24; //Input= target clock, output = actual clock
#else
ULONG ulClock:24; //Input= target clock, output = actual clock
- ULONG ucPostDiv; //return parameter: post divider which is used to program to register directly
+ ULONG ucPostDiv:8; //return parameter: post divider which is used to program to register directly
#endif
}COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4;
@@ -504,6 +506,32 @@ typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5
UCHAR ucReserved;
}COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5;
+
+typedef struct _COMPUTE_GPU_CLOCK_INPUT_PARAMETERS_V1_6
+{
+ ATOM_COMPUTE_CLOCK_FREQ ulClock; //Input Parameter
+ ULONG ulReserved[2];
+}COMPUTE_GPU_CLOCK_INPUT_PARAMETERS_V1_6;
+
+//ATOM_COMPUTE_CLOCK_FREQ.ulComputeClockFlag
+#define COMPUTE_GPUCLK_INPUT_FLAG_CLK_TYPE_MASK 0x0f
+#define COMPUTE_GPUCLK_INPUT_FLAG_DEFAULT_GPUCLK 0x00
+#define COMPUTE_GPUCLK_INPUT_FLAG_SCLK 0x01
+
+typedef struct _COMPUTE_GPU_CLOCK_OUTPUT_PARAMETERS_V1_6
+{
+ COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4 ulClock; //Output Parameter: ucPostDiv=DFS divider
+ ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output Parameter: PLL FB divider
+ UCHAR ucPllRefDiv; //Output Parameter: PLL ref divider
+ UCHAR ucPllPostDiv; //Output Parameter: PLL post divider
+ UCHAR ucPllCntlFlag; //Output Flags: control flag
+ UCHAR ucReserved;
+}COMPUTE_GPU_CLOCK_OUTPUT_PARAMETERS_V1_6;
+
+//ucPllCntlFlag
+#define SPLL_CNTL_FLAG_VCO_MODE_MASK 0x03
+
+
// ucInputFlag
#define ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN 1 // 1-StrobeMode, 0-PerformanceMode
@@ -1686,6 +1714,7 @@ typedef struct _PIXEL_CLOCK_PARAMETERS_V6
#define PIXEL_CLOCK_V6_MISC_HDMI_30BPP 0x08
#define PIXEL_CLOCK_V6_MISC_HDMI_48BPP 0x0c
#define PIXEL_CLOCK_V6_MISC_REF_DIV_SRC 0x10
+#define PIXEL_CLOCK_V6_MISC_GEN_DPREFCLK 0x40
typedef struct _GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V2
{
@@ -2102,6 +2131,17 @@ typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V3
}DVO_ENCODER_CONTROL_PARAMETERS_V3;
#define DVO_ENCODER_CONTROL_PS_ALLOCATION_V3 DVO_ENCODER_CONTROL_PARAMETERS_V3
+typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V1_4
+{
+ USHORT usPixelClock;
+ UCHAR ucDVOConfig;
+ UCHAR ucAction; //ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT
+ UCHAR ucBitPerColor; //please refer to definition of PANEL_xBIT_PER_COLOR
+ UCHAR ucReseved[3];
+}DVO_ENCODER_CONTROL_PARAMETERS_V1_4;
+#define DVO_ENCODER_CONTROL_PS_ALLOCATION_V1_4 DVO_ENCODER_CONTROL_PARAMETERS_V1_4
+
+
//ucTableFormatRevision=1
//ucTableContentRevision=3 structure is not changed but usMisc add bit 1 as another input for
// bit1=0: non-coherent mode
@@ -2165,7 +2205,7 @@ typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V3
#define SET_ASIC_VOLTAGE_MODE_SOURCE_B 0x4
#define SET_ASIC_VOLTAGE_MODE_SET_VOLTAGE 0x0
-#define SET_ASIC_VOLTAGE_MODE_GET_GPIOVAL 0x1
+#define SET_ASIC_VOLTAGE_MODE_GET_GPIOVAL 0x1
#define SET_ASIC_VOLTAGE_MODE_GET_GPIOMASK 0x2
typedef struct _SET_VOLTAGE_PARAMETERS
@@ -2200,15 +2240,20 @@ typedef struct _SET_VOLTAGE_PARAMETERS_V1_3
//SET_VOLTAGE_PARAMETERS_V3.ucVoltageMode
#define ATOM_SET_VOLTAGE 0 //Set voltage Level
#define ATOM_INIT_VOLTAGE_REGULATOR 3 //Init Regulator
-#define ATOM_SET_VOLTAGE_PHASE 4 //Set Vregulator Phase
-#define ATOM_GET_MAX_VOLTAGE 6 //Get Max Voltage, not used in SetVoltageTable v1.3
-#define ATOM_GET_VOLTAGE_LEVEL 6 //Get Voltage level from vitual voltage ID
+#define ATOM_SET_VOLTAGE_PHASE 4 //Set Vregulator Phase, only for SVID/PVID regulator
+#define ATOM_GET_MAX_VOLTAGE 6 //Get Max Voltage, not used from SetVoltageTable v1.3
+#define ATOM_GET_VOLTAGE_LEVEL 6 //Get Voltage level from vitual voltage ID, not used for SetVoltage v1.4
+#define ATOM_GET_LEAKAGE_ID 8 //Get Leakage Voltage Id ( starting from SMU7x IP ), SetVoltage v1.4
// define vitual voltage id in usVoltageLevel
#define ATOM_VIRTUAL_VOLTAGE_ID0 0xff01
#define ATOM_VIRTUAL_VOLTAGE_ID1 0xff02
#define ATOM_VIRTUAL_VOLTAGE_ID2 0xff03
#define ATOM_VIRTUAL_VOLTAGE_ID3 0xff04
+#define ATOM_VIRTUAL_VOLTAGE_ID4 0xff05
+#define ATOM_VIRTUAL_VOLTAGE_ID5 0xff06
+#define ATOM_VIRTUAL_VOLTAGE_ID6 0xff07
+#define ATOM_VIRTUAL_VOLTAGE_ID7 0xff08
typedef struct _SET_VOLTAGE_PS_ALLOCATION
{
@@ -2628,7 +2673,8 @@ typedef struct _ATOM_FIRMWARE_INFO_V2_2
ULONG ulFirmwareRevision;
ULONG ulDefaultEngineClock; //In 10Khz unit
ULONG ulDefaultMemoryClock; //In 10Khz unit
- ULONG ulReserved[2];
+ ULONG ulSPLL_OutputFreq; //In 10Khz unit
+ ULONG ulGPUPLL_OutputFreq; //In 10Khz unit
ULONG ulReserved1; //Was ulMaxEngineClockPLL_Output; //In 10Khz unit*
ULONG ulReserved2; //Was ulMaxMemoryClockPLL_Output; //In 10Khz unit*
ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit
@@ -3813,6 +3859,12 @@ typedef struct _ATOM_GPIO_PIN_ASSIGNMENT
UCHAR ucGPIO_ID;
}ATOM_GPIO_PIN_ASSIGNMENT;
+//ucGPIO_ID pre-define id for multiple usage
+//from SMU7.x, if ucGPIO_ID=PP_AC_DC_SWITCH_GPIO_PINID in GPIO_LUTTable, AC/DC swithing feature is enable
+#define PP_AC_DC_SWITCH_GPIO_PINID 60
+//from SMU7.x, if ucGPIO_ID=VDDC_REGULATOR_VRHOT_GPIO_PINID in GPIO_LUTable, VRHot feature is enable
+#define VDDC_VRHOT_GPIO_PINID 61
+
typedef struct _ATOM_GPIO_PIN_LUT
{
ATOM_COMMON_TABLE_HEADER sHeader;
@@ -4074,17 +4126,19 @@ typedef struct _EXT_DISPLAY_PATH
//usCaps
#define EXT_DISPLAY_PATH_CAPS__HBR2_DISABLE 0x01
+#define EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN 0x02
typedef struct _ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader;
UCHAR ucGuid [NUMBER_OF_UCHAR_FOR_GUID]; // a GUID is a 16 byte long string
EXT_DISPLAY_PATH sPath[MAX_NUMBER_OF_EXT_DISPLAY_PATH]; // total of fixed 7 entries.
- UCHAR ucChecksum; // a simple Checksum of the sum of whole structure equal to 0x0.
+ UCHAR ucChecksum; // a simple Checksum of the sum of whole structure equal to 0x0.
UCHAR uc3DStereoPinId; // use for eDP panel
UCHAR ucRemoteDisplayConfig;
UCHAR uceDPToLVDSRxId;
- UCHAR Reserved[4]; // for potential expansion
+ UCHAR ucFixDPVoltageSwing; // usCaps[1]=1, this indicate DP_LANE_SET value
+ UCHAR Reserved[3]; // for potential expansion
}ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO;
//Related definitions, all records are different but they have a commond header
@@ -4416,6 +4470,13 @@ typedef struct _ATOM_VOLTAGE_CONTROL
#define VOLTAGE_CONTROL_ID_CHL822x 0x08
#define VOLTAGE_CONTROL_ID_VT1586M 0x09
#define VOLTAGE_CONTROL_ID_UP1637 0x0A
+#define VOLTAGE_CONTROL_ID_CHL8214 0x0B
+#define VOLTAGE_CONTROL_ID_UP1801 0x0C
+#define VOLTAGE_CONTROL_ID_ST6788A 0x0D
+#define VOLTAGE_CONTROL_ID_CHLIR3564SVI2 0x0E
+#define VOLTAGE_CONTROL_ID_AD527x 0x0F
+#define VOLTAGE_CONTROL_ID_NCP81022 0x10
+#define VOLTAGE_CONTROL_ID_LTC2635 0x11
typedef struct _ATOM_VOLTAGE_OBJECT
{
@@ -4458,6 +4519,15 @@ typedef struct _ATOM_VOLTAGE_OBJECT_HEADER_V3{
USHORT usSize; //Size of Object
}ATOM_VOLTAGE_OBJECT_HEADER_V3;
+// ATOM_VOLTAGE_OBJECT_HEADER_V3.ucVoltageMode
+#define VOLTAGE_OBJ_GPIO_LUT 0 //VOLTAGE and GPIO Lookup table ->ATOM_GPIO_VOLTAGE_OBJECT_V3
+#define VOLTAGE_OBJ_VR_I2C_INIT_SEQ 3 //VOLTAGE REGULATOR INIT sequece through I2C -> ATOM_I2C_VOLTAGE_OBJECT_V3
+#define VOLTAGE_OBJ_PHASE_LUT 4 //Set Vregulator Phase lookup table ->ATOM_GPIO_VOLTAGE_OBJECT_V3
+#define VOLTAGE_OBJ_SVID2 7 //Indicate voltage control by SVID2 ->ATOM_SVID2_VOLTAGE_OBJECT_V3
+#define VOLTAGE_OBJ_PWRBOOST_LEAKAGE_LUT 0x10 //Powerboost Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
+#define VOLTAGE_OBJ_HIGH_STATE_LEAKAGE_LUT 0x11 //High voltage state Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
+#define VOLTAGE_OBJ_HIGH1_STATE_LEAKAGE_LUT 0x12 //High1 voltage state Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
+
typedef struct _VOLTAGE_LUT_ENTRY_V2
{
ULONG ulVoltageId; // The Voltage ID which is used to program GPIO register
@@ -4473,7 +4543,7 @@ typedef struct _LEAKAGE_VOLTAGE_LUT_ENTRY_V2
typedef struct _ATOM_I2C_VOLTAGE_OBJECT_V3
{
- ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader;
+ ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; // voltage mode = VOLTAGE_OBJ_VR_I2C_INIT_SEQ
UCHAR ucVoltageRegulatorId; //Indicate Voltage Regulator Id
UCHAR ucVoltageControlI2cLine;
UCHAR ucVoltageControlAddress;
@@ -4484,7 +4554,7 @@ typedef struct _ATOM_I2C_VOLTAGE_OBJECT_V3
typedef struct _ATOM_GPIO_VOLTAGE_OBJECT_V3
{
- ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader;
+ ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; // voltage mode = VOLTAGE_OBJ_GPIO_LUT or VOLTAGE_OBJ_PHASE_LUT
UCHAR ucVoltageGpioCntlId; // default is 0 which indicate control through CG VID mode
UCHAR ucGpioEntryNum; // indiate the entry numbers of Votlage/Gpio value Look up table
UCHAR ucPhaseDelay; // phase delay in unit of micro second
@@ -4495,7 +4565,7 @@ typedef struct _ATOM_GPIO_VOLTAGE_OBJECT_V3
typedef struct _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
{
- ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader;
+ ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; // voltage mode = 0x10/0x11/0x12
UCHAR ucLeakageCntlId; // default is 0
UCHAR ucLeakageEntryNum; // indicate the entry number of LeakageId/Voltage Lut table
UCHAR ucReserved[2];
@@ -4503,10 +4573,26 @@ typedef struct _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
LEAKAGE_VOLTAGE_LUT_ENTRY_V2 asLeakageIdLut[1];
}ATOM_LEAKAGE_VOLTAGE_OBJECT_V3;
+
+typedef struct _ATOM_SVID2_VOLTAGE_OBJECT_V3
+{
+ ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; // voltage mode = VOLTAGE_OBJ_SVID2
+// 14:7 – PSI0_VID
+// 6 – PSI0_EN
+// 5 – PSI1
+// 4:2 – load line slope trim.
+// 1:0 – offset trim,
+ USHORT usLoadLine_PSI;
+// GPU GPIO pin Id to SVID2 regulator VRHot pin. possible value 0~31. 0 means GPIO0, 31 means GPIO31
+ UCHAR ucReserved[2];
+ ULONG ulReserved;
+}ATOM_SVID2_VOLTAGE_OBJECT_V3;
+
typedef union _ATOM_VOLTAGE_OBJECT_V3{
ATOM_GPIO_VOLTAGE_OBJECT_V3 asGpioVoltageObj;
ATOM_I2C_VOLTAGE_OBJECT_V3 asI2cVoltageObj;
ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 asLeakageObj;
+ ATOM_SVID2_VOLTAGE_OBJECT_V3 asSVID2Obj;
}ATOM_VOLTAGE_OBJECT_V3;
typedef struct _ATOM_VOLTAGE_OBJECT_INFO_V3_1
@@ -4536,6 +4622,21 @@ typedef struct _ATOM_ASIC_PROFILING_INFO
ATOM_ASIC_PROFILE_VOLTAGE asVoltage;
}ATOM_ASIC_PROFILING_INFO;
+typedef struct _ATOM_ASIC_PROFILING_INFO_V2_1
+{
+ ATOM_COMMON_TABLE_HEADER asHeader;
+ UCHAR ucLeakageBinNum; // indicate the entry number of LeakageId/Voltage Lut table
+ USHORT usLeakageBinArrayOffset; // offset of USHORT Leakage Bin list array ( from lower LeakageId to higher)
+
+ UCHAR ucElbVDDC_Num;
+ USHORT usElbVDDC_IdArrayOffset; // offset of USHORT virtual VDDC voltage id ( 0xff01~0xff08 )
+ USHORT usElbVDDC_LevelArrayOffset; // offset of 2 dimension voltage level USHORT array
+
+ UCHAR ucElbVDDCI_Num;
+ USHORT usElbVDDCI_IdArrayOffset; // offset of USHORT virtual VDDCI voltage id ( 0xff01~0xff08 )
+ USHORT usElbVDDCI_LevelArrayOffset; // offset of 2 dimension voltage level USHORT array
+}ATOM_ASIC_PROFILING_INFO_V2_1;
+
typedef struct _ATOM_POWER_SOURCE_OBJECT
{
UCHAR ucPwrSrcId; // Power source
@@ -4652,6 +4753,8 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V6
#define SYS_INFO_LVDSMISC__888_BPC 0x04
#define SYS_INFO_LVDSMISC__OVERRIDE_EN 0x08
#define SYS_INFO_LVDSMISC__BLON_ACTIVE_LOW 0x10
+// new since Trinity
+#define SYS_INFO_LVDSMISC__TRAVIS_LVDS_VOL_OVERRIDE_EN 0x20
// not used any more
#define SYS_INFO_LVDSMISC__VSYNC_ACTIVE_LOW 0x04
@@ -4752,6 +4855,29 @@ typedef struct _ATOM_FUSION_SYSTEM_INFO_V1
ATOM_INTEGRATED_SYSTEM_INFO_V6 sIntegratedSysInfo;
ULONG ulPowerplayTable[128];
}ATOM_FUSION_SYSTEM_INFO_V1;
+
+
+typedef struct _ATOM_TDP_CONFIG_BITS
+{
+#if ATOM_BIG_ENDIAN
+ ULONG uReserved:2;
+ ULONG uTDP_Value:14; // Original TDP value in tens of milli watts
+ ULONG uCTDP_Value:14; // Override value in tens of milli watts
+ ULONG uCTDP_Enable:2; // = (uCTDP_Value > uTDP_Value? 2: (uCTDP_Value < uTDP_Value))
+#else
+ ULONG uCTDP_Enable:2; // = (uCTDP_Value > uTDP_Value? 2: (uCTDP_Value < uTDP_Value))
+ ULONG uCTDP_Value:14; // Override value in tens of milli watts
+ ULONG uTDP_Value:14; // Original TDP value in tens of milli watts
+ ULONG uReserved:2;
+#endif
+}ATOM_TDP_CONFIG_BITS;
+
+typedef union _ATOM_TDP_CONFIG
+{
+ ATOM_TDP_CONFIG_BITS TDP_config;
+ ULONG TDP_config_all;
+}ATOM_TDP_CONFIG;
+
/**********************************************************************************************************************
ATOM_FUSION_SYSTEM_INFO_V1 Description
sIntegratedSysInfo: refer to ATOM_INTEGRATED_SYSTEM_INFO_V6 definition.
@@ -4784,7 +4910,8 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_7
UCHAR ucMemoryType;
UCHAR ucUMAChannelNumber;
UCHAR strVBIOSMsg[40];
- ULONG ulReserved[20];
+ ATOM_TDP_CONFIG asTdpConfig;
+ ULONG ulReserved[19];
ATOM_AVAILABLE_SCLK_LIST sAvail_SCLK[5];
ULONG ulGMCRestoreResetTime;
ULONG ulMinimumNClk;
@@ -4809,7 +4936,7 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_7
USHORT GnbTdpLimit;
USHORT usMaxLVDSPclkFreqInSingleLink;
UCHAR ucLvdsMisc;
- UCHAR ucLVDSReserved;
+ UCHAR ucTravisLVDSVolAdjust;
UCHAR ucLVDSPwrOnSeqDIGONtoDE_in4Ms;
UCHAR ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms;
UCHAR ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms;
@@ -4817,7 +4944,7 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_7
UCHAR ucLVDSOffToOnDelay_in4Ms;
UCHAR ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms;
UCHAR ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms;
- UCHAR ucLVDSReserved1;
+ UCHAR ucMinAllowedBL_Level;
ULONG ulLCDBitDepthControlVal;
ULONG ulNbpStateMemclkFreq[4];
USHORT usNBP2Voltage;
@@ -4846,6 +4973,7 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_7
#define SYS_INFO_GPUCAPS__TMDSHDMI_COHERENT_SINGLEPLL_MODE 0x01
#define SYS_INFO_GPUCAPS__DP_SINGLEPLL_MODE 0x02
#define SYS_INFO_GPUCAPS__DISABLE_AUX_MODE_DETECT 0x08
+#define SYS_INFO_GPUCAPS__ENABEL_DFS_BYPASS 0x10
/**********************************************************************************************************************
ATOM_INTEGRATED_SYSTEM_INFO_V1_7 Description
@@ -4945,6 +5073,9 @@ ucLVDSMisc: [bit0] LVDS 888bit panel mode =0: LVDS 888 pan
[bit2] LVDS 888bit per color mode =0: 666 bit per color =1:888 bit per color
[bit3] LVDS parameter override enable =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used
[bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low )
+ [bit5] Travid LVDS output voltage override enable, when =1, use ucTravisLVDSVolAdjust value to overwrite Traivs register LVDS_CTRL_4
+ucTravisLVDSVolAdjust When ucLVDSMisc[5]=1,it means platform SBIOS want to overwrite TravisLVDSVoltage. Then VBIOS will use ucTravisLVDSVolAdjust
+ value to program Travis register LVDS_CTRL_4
ucLVDSPwrOnSeqDIGONtoDE_in4Ms: LVDS power up sequence time in unit of 4ms, time delay from DIGON signal active to data enable signal active( DE ).
=0 mean use VBIOS default which is 8 ( 32ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON.
This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
@@ -4964,18 +5095,241 @@ ucLVDSOffToOnDelay_in4Ms: LVDS power down sequence time in unit of 4ms.
=0 means to use VBIOS default delay which is 125 ( 500ms ).
This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
-ucLVDSPwrOnVARY_BLtoBLON_in4Ms: LVDS power up sequence time in unit of 4ms. Time delay from VARY_BL signal on to DLON signal active.
+ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms:
+ LVDS power up sequence time in unit of 4ms. Time delay from VARY_BL signal on to DLON signal active.
=0 means to use VBIOS default delay which is 0 ( 0ms ).
This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
-ucLVDSPwrOffBLONtoVARY_BL_in4Ms: LVDS power down sequence time in unit of 4ms. Time delay from BLON signal off to VARY_BL signal off.
+ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms:
+ LVDS power down sequence time in unit of 4ms. Time delay from BLON signal off to VARY_BL signal off.
=0 means to use VBIOS default delay which is 0 ( 0ms ).
This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+ucMinAllowedBL_Level: Lowest LCD backlight PWM level. This is customer platform specific parameters. By default it is 0.
+
ulNbpStateMemclkFreq[4]: system memory clock frequncey in unit of 10Khz in different NB pstate.
**********************************************************************************************************************/
+// this IntegrateSystemInfoTable is used for Kaveri & Kabini APU
+typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_8
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulBootUpEngineClock;
+ ULONG ulDentistVCOFreq;
+ ULONG ulBootUpUMAClock;
+ ATOM_CLK_VOLT_CAPABILITY sDISPCLK_Voltage[4];
+ ULONG ulBootUpReqDisplayVector;
+ ULONG ulVBIOSMisc;
+ ULONG ulGPUCapInfo;
+ ULONG ulDISP_CLK2Freq;
+ USHORT usRequestedPWMFreqInHz;
+ UCHAR ucHtcTmpLmt;
+ UCHAR ucHtcHystLmt;
+ ULONG ulReserved2;
+ ULONG ulSystemConfig;
+ ULONG ulCPUCapInfo;
+ ULONG ulReserved3;
+ USHORT usGPUReservedSysMemSize;
+ USHORT usExtDispConnInfoOffset;
+ USHORT usPanelRefreshRateRange;
+ UCHAR ucMemoryType;
+ UCHAR ucUMAChannelNumber;
+ UCHAR strVBIOSMsg[40];
+ ATOM_TDP_CONFIG asTdpConfig;
+ ULONG ulReserved[19];
+ ATOM_AVAILABLE_SCLK_LIST sAvail_SCLK[5];
+ ULONG ulGMCRestoreResetTime;
+ ULONG ulReserved4;
+ ULONG ulIdleNClk;
+ ULONG ulDDR_DLL_PowerUpTime;
+ ULONG ulDDR_PLL_PowerUpTime;
+ USHORT usPCIEClkSSPercentage;
+ USHORT usPCIEClkSSType;
+ USHORT usLvdsSSPercentage;
+ USHORT usLvdsSSpreadRateIn10Hz;
+ USHORT usHDMISSPercentage;
+ USHORT usHDMISSpreadRateIn10Hz;
+ USHORT usDVISSPercentage;
+ USHORT usDVISSpreadRateIn10Hz;
+ ULONG ulGPUReservedSysMemBaseAddrLo;
+ ULONG ulGPUReservedSysMemBaseAddrHi;
+ ULONG ulReserved5[3];
+ USHORT usMaxLVDSPclkFreqInSingleLink;
+ UCHAR ucLvdsMisc;
+ UCHAR ucTravisLVDSVolAdjust;
+ UCHAR ucLVDSPwrOnSeqDIGONtoDE_in4Ms;
+ UCHAR ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms;
+ UCHAR ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms;
+ UCHAR ucLVDSPwrOffSeqDEtoDIGON_in4Ms;
+ UCHAR ucLVDSOffToOnDelay_in4Ms;
+ UCHAR ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms;
+ UCHAR ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms;
+ UCHAR ucMinAllowedBL_Level;
+ ULONG ulLCDBitDepthControlVal;
+ ULONG ulNbpStateMemclkFreq[4];
+ ULONG ulReserved6;
+ ULONG ulNbpStateNClkFreq[4];
+ USHORT usNBPStateVoltage[4];
+ USHORT usBootUpNBVoltage;
+ USHORT usReserved2;
+ ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo;
+}ATOM_INTEGRATED_SYSTEM_INFO_V1_8;
+
+/**********************************************************************************************************************
+ ATOM_INTEGRATED_SYSTEM_INFO_V1_8 Description
+ulBootUpEngineClock: VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock
+ulDentistVCOFreq: Dentist VCO clock in 10kHz unit.
+ulBootUpUMAClock: System memory boot up clock frequency in 10Khz unit.
+sDISPCLK_Voltage: Report Display clock frequency requirement on GNB voltage(up to 4 voltage levels).
+
+ulBootUpReqDisplayVector: VBIOS boot up display IDs, following are supported devices in Trinity projects:
+ ATOM_DEVICE_CRT1_SUPPORT 0x0001
+ ATOM_DEVICE_DFP1_SUPPORT 0x0008
+ ATOM_DEVICE_DFP6_SUPPORT 0x0040
+ ATOM_DEVICE_DFP2_SUPPORT 0x0080
+ ATOM_DEVICE_DFP3_SUPPORT 0x0200
+ ATOM_DEVICE_DFP4_SUPPORT 0x0400
+ ATOM_DEVICE_DFP5_SUPPORT 0x0800
+ ATOM_DEVICE_LCD1_SUPPORT 0x0002
+
+ulVBIOSMisc: Miscellenous flags for VBIOS requirement and interface
+ bit[0]=0: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is not supported by SBIOS.
+ =1: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is supported by SBIOS.
+ bit[1]=0: INT15 callback function Get boot display( ax=4e08, bl=01h) is not supported by SBIOS
+ =1: INT15 callback function Get boot display( ax=4e08, bl=01h) is supported by SBIOS
+ bit[2]=0: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is not supported by SBIOS
+ =1: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is supported by SBIOS
+ bit[3]=0: VBIOS fast boot is disable
+ =1: VBIOS fast boot is enable. ( VBIOS skip display device detection in every set mode if LCD panel is connect and LID is open)
+
+ulGPUCapInfo: bit[0~2]= Reserved
+ bit[3]=0: Enable AUX HW mode detection logic
+ =1: Disable AUX HW mode detection logic
+ bit[4]=0: Disable DFS bypass feature
+ =1: Enable DFS bypass feature
+
+usRequestedPWMFreqInHz: When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW).
+ Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0;
+
+ When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below:
+ 1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use;
+ VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result,
+ Changing BL using VBIOS function is functional in both driver and non-driver present environment;
+ and enabling VariBri under the driver environment from PP table is optional.
+
+ 2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating
+ that BL control from GPU is expected.
+ VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1
+ Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but
+ it's per platform
+ and enabling VariBri under the driver environment from PP table is optional.
+
+ucHtcTmpLmt: Refer to D18F3x64 bit[22:16], HtcTmpLmt. Threshold on value to enter HTC_active state.
+ucHtcHystLmt: Refer to D18F3x64 bit[27:24], HtcHystLmt.
+ To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt.
+
+ulSystemConfig: Bit[0]=0: PCIE Power Gating Disabled
+ =1: PCIE Power Gating Enabled
+ Bit[1]=0: DDR-DLL shut-down feature disabled.
+ 1: DDR-DLL shut-down feature enabled.
+ Bit[2]=0: DDR-PLL Power down feature disabled.
+ 1: DDR-PLL Power down feature enabled.
+ Bit[3]=0: GNB DPM is disabled
+ =1: GNB DPM is enabled
+ulCPUCapInfo: TBD
+
+usExtDispConnInfoOffset: Offset to sExtDispConnInfo inside the structure
+usPanelRefreshRateRange: Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set
+ to indicate a range.
+ SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004
+ SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008
+ SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010
+ SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020
+
+ucMemoryType: [3:0]=1:DDR1;=2:DDR2;=3:DDR3;=5:GDDR5; [7:4] is reserved.
+ucUMAChannelNumber: System memory channel numbers.
+
+strVBIOSMsg[40]: VBIOS boot up customized message string
+
+sAvail_SCLK[5]: Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high
+
+ulGMCRestoreResetTime: GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns.
+ulIdleNClk: NCLK speed while memory runs in self-refresh state, used to calculate self-refresh latency. Unit in 10kHz.
+ulDDR_DLL_PowerUpTime: DDR PHY DLL power up time. Unit in ns.
+ulDDR_PLL_PowerUpTime: DDR PHY PLL power up time. Unit in ns.
+
+usPCIEClkSSPercentage: PCIE Clock Spread Spectrum Percentage in unit 0.01%; 100 mean 1%.
+usPCIEClkSSType: PCIE Clock Spread Spectrum Type. 0 for Down spread(default); 1 for Center spread.
+usLvdsSSPercentage: LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting.
+usLvdsSSpreadRateIn10Hz: LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
+usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting.
+usHDMISSpreadRateIn10Hz: HDMI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
+usDVISSPercentage: DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting.
+usDVISSpreadRateIn10Hz: DVI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
+
+usGPUReservedSysMemSize: Reserved system memory size for ACP engine in APU GNB, units in MB. 0/2/4MB based on CMOS options, current default could be 0MB. KV only, not on KB.
+ulGPUReservedSysMemBaseAddrLo: Low 32 bits base address to the reserved system memory.
+ulGPUReservedSysMemBaseAddrHi: High 32 bits base address to the reserved system memory.
+
+usMaxLVDSPclkFreqInSingleLink: Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz
+ucLVDSMisc: [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode
+ [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped
+ [bit2] LVDS 888bit per color mode =0: 666 bit per color =1:888 bit per color
+ [bit3] LVDS parameter override enable =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used
+ [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low )
+ [bit5] Travid LVDS output voltage override enable, when =1, use ucTravisLVDSVolAdjust value to overwrite Traivs register LVDS_CTRL_4
+ucTravisLVDSVolAdjust When ucLVDSMisc[5]=1,it means platform SBIOS want to overwrite TravisLVDSVoltage. Then VBIOS will use ucTravisLVDSVolAdjust
+ value to program Travis register LVDS_CTRL_4
+ucLVDSPwrOnSeqDIGONtoDE_in4Ms:
+ LVDS power up sequence time in unit of 4ms, time delay from DIGON signal active to data enable signal active( DE ).
+ =0 mean use VBIOS default which is 8 ( 32ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON.
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+ucLVDSPwrOnDEtoVARY_BL_in4Ms:
+ LVDS power up sequence time in unit of 4ms., time delay from DE( data enable ) active to Vary Brightness enable signal active( VARY_BL ).
+ =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON.
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+ucLVDSPwrOffVARY_BLtoDE_in4Ms:
+ LVDS power down sequence time in unit of 4ms, time delay from data enable ( DE ) signal off to LCDVCC (DIGON) off.
+ =0 mean use VBIOS default delay which is 8 ( 32ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+ucLVDSPwrOffDEtoDIGON_in4Ms:
+ LVDS power down sequence time in unit of 4ms, time delay from vary brightness enable signal( VARY_BL) off to data enable ( DE ) signal off.
+ =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+ucLVDSOffToOnDelay_in4Ms:
+ LVDS power down sequence time in unit of 4ms. Time delay from DIGON signal off to DIGON signal active.
+ =0 means to use VBIOS default delay which is 125 ( 500ms ).
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms:
+ LVDS power up sequence time in unit of 4ms. Time delay from VARY_BL signal on to DLON signal active.
+ =0 means to use VBIOS default delay which is 0 ( 0ms ).
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms:
+ LVDS power down sequence time in unit of 4ms. Time delay from BLON signal off to VARY_BL signal off.
+ =0 means to use VBIOS default delay which is 0 ( 0ms ).
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+ucMinAllowedBL_Level: Lowest LCD backlight PWM level. This is customer platform specific parameters. By default it is 0.
+
+ulLCDBitDepthControlVal: GPU display control encoder bit dither control setting, used to program register mmFMT_BIT_DEPTH_CONTROL
+
+ulNbpStateMemclkFreq[4]: system memory clock frequncey in unit of 10Khz in different NB P-State(P0, P1, P2 & P3).
+ulNbpStateNClkFreq[4]: NB P-State NClk frequency in different NB P-State
+usNBPStateVoltage[4]: NB P-State (P0/P1 & P2/P3) voltage; NBP3 refers to lowes voltage
+usBootUpNBVoltage: NB P-State voltage during boot up before driver loaded
+sExtDispConnInfo: Display connector information table provided to VBIOS
+
+**********************************************************************************************************************/
+
+// this Table is used for Kaveri/Kabini APU
+typedef struct _ATOM_FUSION_SYSTEM_INFO_V2
+{
+ ATOM_INTEGRATED_SYSTEM_INFO_V1_8 sIntegratedSysInfo; // refer to ATOM_INTEGRATED_SYSTEM_INFO_V1_8 definition
+ ULONG ulPowerplayTable[128]; // Update comments here to link new powerplay table definition structure
+}ATOM_FUSION_SYSTEM_INFO_V2;
+
+
/**************************************************************************/
// This portion is only used when ext thermal chip or engine/memory clock SS chip is populated on a design
//Memory SS Info Table
@@ -5026,22 +5380,24 @@ typedef struct _ATOM_ASIC_SS_ASSIGNMENT
//Define ucClockIndication, SW uses the IDs below to search if the SS is required/enabled on a clock branch/signal type.
//SS is not required or enabled if a match is not found.
-#define ASIC_INTERNAL_MEMORY_SS 1
-#define ASIC_INTERNAL_ENGINE_SS 2
-#define ASIC_INTERNAL_UVD_SS 3
-#define ASIC_INTERNAL_SS_ON_TMDS 4
-#define ASIC_INTERNAL_SS_ON_HDMI 5
-#define ASIC_INTERNAL_SS_ON_LVDS 6
-#define ASIC_INTERNAL_SS_ON_DP 7
-#define ASIC_INTERNAL_SS_ON_DCPLL 8
-#define ASIC_EXTERNAL_SS_ON_DP_CLOCK 9
-#define ASIC_INTERNAL_VCE_SS 10
+#define ASIC_INTERNAL_MEMORY_SS 1
+#define ASIC_INTERNAL_ENGINE_SS 2
+#define ASIC_INTERNAL_UVD_SS 3
+#define ASIC_INTERNAL_SS_ON_TMDS 4
+#define ASIC_INTERNAL_SS_ON_HDMI 5
+#define ASIC_INTERNAL_SS_ON_LVDS 6
+#define ASIC_INTERNAL_SS_ON_DP 7
+#define ASIC_INTERNAL_SS_ON_DCPLL 8
+#define ASIC_EXTERNAL_SS_ON_DP_CLOCK 9
+#define ASIC_INTERNAL_VCE_SS 10
+#define ASIC_INTERNAL_GPUPLL_SS 11
+
typedef struct _ATOM_ASIC_SS_ASSIGNMENT_V2
{
ULONG ulTargetClockRange; //For mem/engine/uvd, Clock Out frequence (VCO ), in unit of 10Khz
//For TMDS/HDMI/LVDS, it is pixel clock , for DP, it is link clock ( 27000 or 16200 )
- USHORT usSpreadSpectrumPercentage; //in unit of 0.01%
+ USHORT usSpreadSpectrumPercentage; //in unit of 0.01% or 0.001%, decided by ucSpreadSpectrumMode bit4
USHORT usSpreadRateIn10Hz; //in unit of 10Hz, modulation freq
UCHAR ucClockIndication; //Indicate which clock source needs SS
UCHAR ucSpreadSpectrumMode; //Bit0=0 Down Spread,=1 Center Spread, bit1=0: internal SS bit1=1: external SS
@@ -5079,6 +5435,11 @@ typedef struct _ATOM_ASIC_SS_ASSIGNMENT_V3
UCHAR ucReserved[2];
}ATOM_ASIC_SS_ASSIGNMENT_V3;
+//ATOM_ASIC_SS_ASSIGNMENT_V3.ucSpreadSpectrumMode
+#define SS_MODE_V3_CENTRE_SPREAD_MASK 0x01
+#define SS_MODE_V3_EXTERNAL_SS_MASK 0x02
+#define SS_MODE_V3_PERCENTAGE_DIV_BY_1000_MASK 0x10
+
typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3
{
ATOM_COMMON_TABLE_HEADER sHeader;
@@ -5719,6 +6080,7 @@ typedef struct _INDIRECT_IO_ACCESS
#define INDIRECT_IO_PCIE 3
#define INDIRECT_IO_PCIEP 4
#define INDIRECT_IO_NBMISC 5
+#define INDIRECT_IO_SMU 5
#define INDIRECT_IO_PLL_READ INDIRECT_IO_PLL | INDIRECT_READ
#define INDIRECT_IO_PLL_WRITE INDIRECT_IO_PLL | INDIRECT_WRITE
@@ -5730,6 +6092,8 @@ typedef struct _INDIRECT_IO_ACCESS
#define INDIRECT_IO_PCIEP_WRITE INDIRECT_IO_PCIEP | INDIRECT_WRITE
#define INDIRECT_IO_NBMISC_READ INDIRECT_IO_NBMISC | INDIRECT_READ
#define INDIRECT_IO_NBMISC_WRITE INDIRECT_IO_NBMISC | INDIRECT_WRITE
+#define INDIRECT_IO_SMU_READ INDIRECT_IO_SMU | INDIRECT_READ
+#define INDIRECT_IO_SMU_WRITE INDIRECT_IO_SMU | INDIRECT_WRITE
typedef struct _ATOM_OEM_INFO
{
@@ -5875,6 +6239,7 @@ typedef struct _ATOM_MC_INIT_PARAM_TABLE
#define _64Mx32 0x43
#define _128Mx8 0x51
#define _128Mx16 0x52
+#define _128Mx32 0x53
#define _256Mx8 0x61
#define _256Mx16 0x62
@@ -5893,6 +6258,8 @@ typedef struct _ATOM_MC_INIT_PARAM_TABLE
#define PROMOS MOSEL
#define KRETON INFINEON
#define ELIXIR NANYA
+#define MEZZA ELPIDA
+
/////////////Support for GDDR5 MC uCode to reside in upper 64K of ROM/////////////
@@ -6625,6 +6992,10 @@ typedef struct _ATOM_DISP_OUT_INFO_V3
ASIC_TRANSMITTER_INFO_V2 asTransmitterInfo[1]; // for alligment only
}ATOM_DISP_OUT_INFO_V3;
+//ucDispCaps
+#define DISPLAY_CAPS__DP_PCLK_FROM_PPLL 0x01
+#define DISPLAY_CAPS__FORCE_DISPDEV_CONNECTED 0x02
+
typedef enum CORE_REF_CLK_SOURCE{
CLOCK_SRC_XTALIN=0,
CLOCK_SRC_XO_IN=1,
@@ -6829,6 +7200,17 @@ typedef struct _DIG_TRANSMITTER_INFO_HEADER_V3_1{
USHORT usPhyPllSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy Pll Settings
}DIG_TRANSMITTER_INFO_HEADER_V3_1;
+typedef struct _DIG_TRANSMITTER_INFO_HEADER_V3_2{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usDPVsPreEmphSettingOffset; // offset of PHY_ANALOG_SETTING_INFO * with DP Voltage Swing and Pre-Emphasis for each Link clock
+ USHORT usPhyAnalogRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with None-DP mode Analog Setting's register Info
+ USHORT usPhyAnalogSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with None-DP mode Analog Setting for each link clock range
+ USHORT usPhyPllRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy Pll register Info
+ USHORT usPhyPllSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy Pll Settings
+ USHORT usDPSSRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy SS Pll register Info
+ USHORT usDPSSSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy SS Pll Settings
+}DIG_TRANSMITTER_INFO_HEADER_V3_2;
+
typedef struct _CLOCK_CONDITION_REGESTER_INFO{
USHORT usRegisterIndex;
UCHAR ucStartBit;
@@ -6852,12 +7234,24 @@ typedef struct _PHY_CONDITION_REG_VAL{
ULONG ulRegVal;
}PHY_CONDITION_REG_VAL;
+typedef struct _PHY_CONDITION_REG_VAL_V2{
+ ULONG ulCondition;
+ UCHAR ucCondition2;
+ ULONG ulRegVal;
+}PHY_CONDITION_REG_VAL_V2;
+
typedef struct _PHY_CONDITION_REG_INFO{
USHORT usRegIndex;
USHORT usSize;
PHY_CONDITION_REG_VAL asRegVal[1];
}PHY_CONDITION_REG_INFO;
+typedef struct _PHY_CONDITION_REG_INFO_V2{
+ USHORT usRegIndex;
+ USHORT usSize;
+ PHY_CONDITION_REG_VAL_V2 asRegVal[1];
+}PHY_CONDITION_REG_INFO_V2;
+
typedef struct _PHY_ANALOG_SETTING_INFO{
UCHAR ucEncodeMode;
UCHAR ucPhySel;
@@ -6865,6 +7259,25 @@ typedef struct _PHY_ANALOG_SETTING_INFO{
PHY_CONDITION_REG_INFO asAnalogSetting[1];
}PHY_ANALOG_SETTING_INFO;
+typedef struct _PHY_ANALOG_SETTING_INFO_V2{
+ UCHAR ucEncodeMode;
+ UCHAR ucPhySel;
+ USHORT usSize;
+ PHY_CONDITION_REG_INFO_V2 asAnalogSetting[1];
+}PHY_ANALOG_SETTING_INFO_V2;
+
+typedef struct _GFX_HAVESTING_PARAMETERS {
+ UCHAR ucGfxBlkId; //GFX blk id to be harvested, like CU, RB or PRIM
+ UCHAR ucReserved; //reserved
+ UCHAR ucActiveUnitNumPerSH; //requested active CU/RB/PRIM number per shader array
+ UCHAR ucMaxUnitNumPerSH; //max CU/RB/PRIM number per shader array
+} GFX_HAVESTING_PARAMETERS;
+
+//ucGfxBlkId
+#define GFX_HARVESTING_CU_ID 0
+#define GFX_HARVESTING_RB_ID 1
+#define GFX_HARVESTING_PRIM_ID 2
+
/****************************************************************************/
//Portion VI: Definitinos for vbios MC scratch registers that driver used
/****************************************************************************/
@@ -6875,8 +7288,17 @@ typedef struct _PHY_ANALOG_SETTING_INFO{
#define MC_MISC0__MEMORY_TYPE__GDDR3 0x30000000
#define MC_MISC0__MEMORY_TYPE__GDDR4 0x40000000
#define MC_MISC0__MEMORY_TYPE__GDDR5 0x50000000
+#define MC_MISC0__MEMORY_TYPE__HBM 0x60000000
#define MC_MISC0__MEMORY_TYPE__DDR3 0xB0000000
+#define ATOM_MEM_TYPE_DDR_STRING "DDR"
+#define ATOM_MEM_TYPE_DDR2_STRING "DDR2"
+#define ATOM_MEM_TYPE_GDDR3_STRING "GDDR3"
+#define ATOM_MEM_TYPE_GDDR4_STRING "GDDR4"
+#define ATOM_MEM_TYPE_GDDR5_STRING "GDDR5"
+#define ATOM_MEM_TYPE_HBM_STRING "HBM"
+#define ATOM_MEM_TYPE_DDR3_STRING "DDR3"
+
/****************************************************************************/
//Portion VI: Definitinos being oboselete
/****************************************************************************/
--
1.7.7.5
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
