[PATCH] drm/ast: Fix default resolution when no monitor is connected on DP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Since commit fae7d186403e ("drm/probe-helper: Default to 640x480 if no
 EDID on DP")
The default resolution is now 640x480 when no monitor is connected.
But Aspeed graphics is mostly used in servers, where no monitor
is attached. This also affects the "remote" resolution to 640x480, which is
inconvenient, and breaks the anaconda installer.
So when no EDID is present, set 1024x768 as preferred resolution.

Fixes: fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP")
Signed-off-by: Jocelyn Falempe <jfalempe@xxxxxxxxxx>
---
 drivers/gpu/drm/ast/ast_mode.c | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
index 36374828f6c8..8f7b7cc021c7 100644
--- a/drivers/gpu/drm/ast/ast_mode.c
+++ b/drivers/gpu/drm/ast/ast_mode.c
@@ -1589,9 +1589,31 @@ static const struct drm_connector_helper_funcs ast_dp501_connector_helper_funcs
 	.get_modes = ast_dp501_connector_helper_get_modes,
 };
 
+static int ast_dp_probe_single_connector_modes(struct drm_connector *connector,
+					       uint32_t maxX, uint32_t maxY)
+{
+	int ret;
+	struct drm_display_mode *mode;
+
+	ret = drm_helper_probe_single_connector_modes(connector, maxX, maxY);
+	/*
+	 * When no monitor are detected, DP now default to 640x480
+	 * As aspeed is mostly used in remote server, and DP monitors are
+	 * rarely attached, it's better to default to 1024x768
+	 */
+	if (!connector->edid_blob_ptr) {
+		list_for_each_entry(mode, &connector->modes, head) {
+			if (mode->hdisplay == 1024 && mode->vdisplay == 768)
+				mode->type |= DRM_MODE_TYPE_PREFERRED;
+			drm_mode_sort(&connector->modes);
+		}
+	}
+	return ret;
+}
+
 static const struct drm_connector_funcs ast_dp501_connector_funcs = {
 	.reset = drm_atomic_helper_connector_reset,
-	.fill_modes = drm_helper_probe_single_connector_modes,
+	.fill_modes = ast_dp_probe_single_connector_modes,
 	.destroy = drm_connector_cleanup,
 	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
@@ -1678,7 +1700,7 @@ static const struct drm_connector_helper_funcs ast_astdp_connector_helper_funcs
 
 static const struct drm_connector_funcs ast_astdp_connector_funcs = {
 	.reset = drm_atomic_helper_connector_reset,
-	.fill_modes = drm_helper_probe_single_connector_modes,
+	.fill_modes = ast_dp_probe_single_connector_modes,
 	.destroy = drm_connector_cleanup,
 	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,

base-commit: 0adec22702d497385dbdc52abb165f379a00efba
-- 
2.40.1




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux