This prepares the code for handling multiple connectors in a single
pipeline in a cloned configuration.
Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
tests/modetest/modetest.c | 162 ++++++++++++++++++++++++----------------------
1 file changed, 85 insertions(+), 77 deletions(-)
diff --git a/tests/modetest/modetest.c b/tests/modetest/modetest.c
index adbd073..6be8c75 100644
--- a/tests/modetest/modetest.c
+++ b/tests/modetest/modetest.c
@@ -635,7 +635,7 @@ error:
}
/* -----------------------------------------------------------------------------
- * Connectors and planes
+ * Pipes and planes
*/
/*
@@ -645,8 +645,8 @@ error:
* Then you need to find the encoder attached to that connector so you
* can bind it with a free crtc.
*/
-struct connector_arg {
- uint32_t id;
+struct pipe_arg {
+ uint32_t con_id;
uint32_t crtc_id;
char mode_str[64];
char format_str[5];
@@ -669,14 +669,14 @@ struct plane_arg {
unsigned int fourcc;
};
-static void connector_find_mode(struct device *dev, struct connector_arg *c)
+static void pipe_find_mode(struct device *dev, struct pipe_arg *pipe)
{
drmModeConnector *connector;
drmModeEncoder *encoder;
int i, j;
/* First, find the connector & mode */
- c->mode = NULL;
+ pipe->mode = NULL;
for (i = 0; i < dev->resources->res->count_connectors; i++) {
connector = dev->resources->connectors[i].connector;
if (!connector)
@@ -685,50 +685,50 @@ static void connector_find_mode(struct device *dev, struct connector_arg *c)
if (!connector->count_modes)
continue;
- if (connector->connector_id != c->id)
+ if (connector->connector_id != pipe->con_id)
continue;
for (j = 0; j < connector->count_modes; j++) {
- c->mode = &connector->modes[j];
- if (!strcmp(c->mode->name, c->mode_str))
+ pipe->mode = &connector->modes[j];
+ if (!strcmp(pipe->mode->name, pipe->mode_str))
break;
}
/* Found it, break out */
- if (c->mode)
+ if (pipe->mode)
break;
}
- if (!c->mode) {
- fprintf(stderr, "failed to find mode \"%s\"\n", c->mode_str);
+ if (!pipe->mode) {
+ fprintf(stderr, "failed to find mode \"%s\"\n", pipe->mode_str);
return;
}
/* If the CRTC ID was specified, get the corresponding CRTC. Otherwise
* locate a CRTC that can be attached to the connector.
*/
- if (c->crtc_id == (uint32_t)-1) {
+ if (pipe->crtc_id == (uint32_t)-1) {
for (i = 0; i < dev->resources->res->count_encoders; i++) {
encoder = dev->resources->encoders[i].encoder;
if (!encoder)
continue;
if (encoder->encoder_id == connector->encoder_id) {
- c->crtc_id = encoder->crtc_id;
+ pipe->crtc_id = encoder->crtc_id;
break;
}
}
}
- if (c->crtc_id == (uint32_t)-1)
+ if (pipe->crtc_id == (uint32_t)-1)
return;
for (i = 0; i < dev->resources->res->count_crtcs; i++) {
struct crtc *crtc = &dev->resources->crtcs[i];
- if (c->crtc_id == crtc->crtc->crtc_id) {
- crtc->mode = c->mode;
- c->crtc = crtc;
+ if (pipe->crtc_id == crtc->crtc->crtc_id) {
+ crtc->mode = pipe->mode;
+ pipe->crtc = crtc;
break;
}
}
@@ -815,28 +815,28 @@ static void
page_flip_handler(int fd, unsigned int frame,
unsigned int sec, unsigned int usec, void *data)
{
- struct connector_arg *c;
+ struct pipe_arg *pipe;
unsigned int new_fb_id;
struct timeval end;
double t;
- c = data;
- if (c->current_fb_id == c->fb_id[0])
- new_fb_id = c->fb_id[1];
+ pipe = data;
+ if (pipe->current_fb_id == pipe->fb_id[0])
+ new_fb_id = pipe->fb_id[1];
else
- new_fb_id = c->fb_id[0];
+ new_fb_id = pipe->fb_id[0];
- drmModePageFlip(fd, c->crtc_id, new_fb_id,
- DRM_MODE_PAGE_FLIP_EVENT, c);
- c->current_fb_id = new_fb_id;
- c->swap_count++;
- if (c->swap_count == 60) {
+ drmModePageFlip(fd, pipe->crtc_id, new_fb_id,
+ DRM_MODE_PAGE_FLIP_EVENT, pipe);
+ pipe->current_fb_id = new_fb_id;
+ pipe->swap_count++;
+ if (pipe->swap_count == 60) {
gettimeofday(&end, NULL);
t = end.tv_sec + end.tv_usec * 1e-6 -
- (c->start.tv_sec + c->start.tv_usec * 1e-6);
- fprintf(stderr, "freq: %.02fHz\n", c->swap_count / t);
- c->swap_count = 0;
- c->start = end;
+ (pipe->start.tv_sec + pipe->start.tv_usec * 1e-6);
+ fprintf(stderr, "freq: %.02fHz\n", pipe->swap_count / t);
+ pipe->swap_count = 0;
+ pipe->start = end;
}
}
@@ -923,7 +923,7 @@ static int set_plane(struct device *dev, struct plane_arg *p)
return 0;
}
-static void set_mode(struct device *dev, struct connector_arg *c, unsigned int count)
+static void set_mode(struct device *dev, struct pipe_arg *pipes, unsigned int count)
{
uint32_t handles[4], pitches[4], offsets[4] = {0}; /* we only use [0] */
unsigned int fb_id;
@@ -935,22 +935,24 @@ static void set_mode(struct device *dev, struct connector_arg *c, unsigned int c
dev->mode.height = 0;
for (i = 0; i < count; i++) {
- connector_find_mode(dev, &c[i]);
- if (c[i].mode == NULL)
+ struct pipe_arg *pipe = &pipes[i];
+
+ pipe_find_mode(dev, pipe);
+ if (pipe->mode == NULL)
continue;
- dev->mode.width += c[i].mode->hdisplay;
- if (dev->mode.height < c[i].mode->vdisplay)
- dev->mode.height = c[i].mode->vdisplay;
+ dev->mode.width += pipe->mode->hdisplay;
+ if (dev->mode.height < pipe->mode->vdisplay)
+ dev->mode.height = pipe->mode->vdisplay;
}
- bo = create_test_buffer(dev->kms, c->fourcc,
+ bo = create_test_buffer(dev->kms, pipes[0].fourcc,
dev->mode.width, dev->mode.height,
handles, pitches, offsets, PATTERN_SMPTE);
if (bo == NULL)
return;
- ret = drmModeAddFB2(dev->fd, dev->mode.width, dev->mode.height, c->fourcc,
- handles, pitches, offsets, &fb_id, 0);
+ ret = drmModeAddFB2(dev->fd, dev->mode.width, dev->mode.height,
+ pipes[0].fourcc, handles, pitches, offsets, &fb_id, 0);
if (ret) {
fprintf(stderr, "failed to add fb (%ux%u): %s\n",
dev->mode.width, dev->mode.height, strerror(errno));
@@ -959,19 +961,22 @@ static void set_mode(struct device *dev, struct connector_arg *c, unsigned int c
x = 0;
for (i = 0; i < count; i++) {
- if (c[i].mode == NULL)
+ struct pipe_arg *pipe = &pipes[i];
+
+ if (pipe->mode == NULL)
continue;
printf("setting mode %s@%s on connector %d, crtc %d\n",
- c[i].mode_str, c[i].format_str, c[i].id, c[i].crtc_id);
+ pipe->mode_str, pipe->format_str, pipe->con_id,
+ pipe->crtc_id);
- ret = drmModeSetCrtc(dev->fd, c[i].crtc_id, fb_id, x, 0,
- &c[i].id, 1, c[i].mode);
+ ret = drmModeSetCrtc(dev->fd, pipe->crtc_id, fb_id, x, 0,
+ &pipe->con_id, 1, pipe->mode);
/* XXX: Actually check if this is needed */
drmModeDirtyFB(dev->fd, fb_id, NULL, 0);
- x += c[i].mode->hdisplay;
+ x += pipe->mode->hdisplay;
if (ret) {
fprintf(stderr, "failed to set mode: %s\n", strerror(errno));
@@ -993,7 +998,7 @@ static void set_planes(struct device *dev, struct plane_arg *p, unsigned int cou
return;
}
-static void test_page_flip(struct device *dev, struct connector_arg *c, unsigned int count)
+static void test_page_flip(struct device *dev, struct pipe_arg *pipes, unsigned int count)
{
uint32_t handles[4], pitches[4], offsets[4] = {0}; /* we only use [0] */
unsigned int other_fb_id;
@@ -1002,34 +1007,37 @@ static void test_page_flip(struct device *dev, struct connector_arg *c, unsigned
unsigned int i;
int ret;
- other_bo = create_test_buffer(dev->kms, c->fourcc,
+ other_bo = create_test_buffer(dev->kms, pipes[0].fourcc,
dev->mode.width, dev->mode.height,
handles, pitches, offsets, PATTERN_PLAIN);
if (other_bo == NULL)
return;
- ret = drmModeAddFB2(dev->fd, dev->mode.width, dev->mode.height, c->fourcc,
- handles, pitches, offsets, &other_fb_id, 0);
+ ret = drmModeAddFB2(dev->fd, dev->mode.width, dev->mode.height,
+ pipes[0].fourcc, handles, pitches, offsets,
+ &other_fb_id, 0);
if (ret) {
fprintf(stderr, "failed to add fb: %s\n", strerror(errno));
return;
}
for (i = 0; i < count; i++) {
- if (c[i].mode == NULL)
+ struct pipe_arg *pipe = &pipes[i];
+
+ if (pipe->mode == NULL)
continue;
- ret = drmModePageFlip(dev->fd, c[i].crtc_id, other_fb_id,
- DRM_MODE_PAGE_FLIP_EVENT, &c[i]);
+ ret = drmModePageFlip(dev->fd, pipe->crtc_id, other_fb_id,
+ DRM_MODE_PAGE_FLIP_EVENT, pipe);
if (ret) {
fprintf(stderr, "failed to page flip: %s\n", strerror(errno));
return;
}
- gettimeofday(&c[i].start, NULL);
- c[i].swap_count = 0;
- c[i].fb_id[0] = dev->mode.fb_id;
- c[i].fb_id[1] = other_fb_id;
- c[i].current_fb_id = other_fb_id;
+ gettimeofday(&pipe->start, NULL);
+ pipe->swap_count = 0;
+ pipe->fb_id[0] = dev->mode.fb_id;
+ pipe->fb_id[1] = other_fb_id;
+ pipe->current_fb_id = other_fb_id;
}
memset(&evctx, 0, sizeof evctx);
@@ -1080,19 +1088,19 @@ static void test_page_flip(struct device *dev, struct connector_arg *c, unsigned
#define min(a, b) ((a) < (b) ? (a) : (b))
-static int parse_connector(struct connector_arg *c, const char *arg)
+static int parse_connector(struct pipe_arg *pipe, const char *arg)
{
unsigned int len;
const char *p;
char *endp;
- c->crtc_id = (uint32_t)-1;
- strcpy(c->format_str, "XR24");
+ pipe->crtc_id = (uint32_t)-1;
+ strcpy(pipe->format_str, "XR24");
- c->id = strtoul(arg, &endp, 10);
+ pipe->con_id = strtoul(arg, &endp, 10);
if (*endp == '@') {
arg = endp + 1;
- c->crtc_id = strtoul(arg, &endp, 10);
+ pipe->crtc_id = strtoul(arg, &endp, 10);
}
if (*endp != ':')
return -1;
@@ -1100,18 +1108,18 @@ static int parse_connector(struct connector_arg *c, const char *arg)
arg = endp + 1;
p = strchrnul(arg, '@');
- len = min(sizeof c->mode_str - 1, (unsigned int)(p - arg));
- strncpy(c->mode_str, arg, len);
- c->mode_str[len] = '\0';
+ len = min(sizeof pipe->mode_str - 1, (unsigned int)(p - arg));
+ strncpy(pipe->mode_str, arg, len);
+ pipe->mode_str[len] = '\0';
if (*p == '@') {
- strncpy(c->format_str, p + 1, 4);
- c->format_str[4] = '\0';
+ strncpy(pipe->format_str, p + 1, 4);
+ pipe->format_str[4] = '\0';
}
- c->fourcc = format_fourcc(c->format_str);
- if (c->fourcc == 0) {
- fprintf(stderr, "unknown format %s\n", c->format_str);
+ pipe->fourcc = format_fourcc(pipe->format_str);
+ if (pipe->fourcc == 0) {
+ fprintf(stderr, "unknown format %s\n", pipe->format_str);
return -1;
}
@@ -1235,7 +1243,7 @@ int main(int argc, char **argv)
unsigned int i;
int count = 0, plane_count = 0;
unsigned int prop_count = 0;
- struct connector_arg *con_args = NULL;
+ struct pipe_arg *pipe_args = NULL;
struct plane_arg *plane_args = NULL;
struct property_arg *prop_args = NULL;
int ret;
@@ -1278,14 +1286,14 @@ int main(int argc, char **argv)
planes = 1;
break;
case 's':
- con_args = realloc(con_args,
- (count + 1) * sizeof *con_args);
- if (con_args == NULL) {
+ pipe_args = realloc(pipe_args,
+ (count + 1) * sizeof *pipe_args);
+ if (pipe_args == NULL) {
fprintf(stderr, "memory allocation failed\n");
return 1;
}
- if (parse_connector(&con_args[count], optarg) < 0)
+ if (parse_connector(&pipe_args[count], optarg) < 0)
usage(argv[0]);
count++;
@@ -1378,13 +1386,13 @@ int main(int argc, char **argv)
}
if (count)
- set_mode(&dev, con_args, count);
+ set_mode(&dev, pipe_args, count);
if (plane_count)
set_planes(&dev, plane_args, plane_count);
if (test_vsync)
- test_page_flip(&dev, con_args, count);
+ test_page_flip(&dev, pipe_args, count);
if (drop_master)
drmDropMaster(dev.fd);
--
1.8.1.5
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
