Re: [PATCH 9/9] ARM/dts: update device tree binding documentation for hdmi susbsystem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 11 Jun 2013 19:41:31 +0530, Rahul Sharma <rahul.sharma@xxxxxxxxxxx> wrote:
> Update device tree binding documentation for hdmi subsystem with the
> clock information, phy property information and compatible strings for
> exynos5420.
> 
> Signed-off-by: Rahul Sharma <rahul.sharma@xxxxxxxxxxx>

Binding looks reasonable to me. I'll leave it to the video maintainers
to say whether or not it is covers the right amount of configuration
data.

g.

> ---
>  .../devicetree/bindings/video/exynos_hdmi.txt       |   19 +++++++++++++++++++
>  .../devicetree/bindings/video/exynos_hdmiphy.txt    |   10 ++++++++--
>  .../devicetree/bindings/video/exynos_mixer.txt      |    7 +++++++
>  3 files changed, 34 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
> index 2ac01ca..e3c5853 100644
> --- a/Documentation/devicetree/bindings/video/exynos_hdmi.txt
> +++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
> @@ -4,6 +4,7 @@ Required properties:
>  - compatible: value should be one among the following:
>  	1) "samsung,exynos4210-hdmi"
>  	2) "samsung,exynos4212-hdmi"
> +	3) "samsung,exynos5420-hdmi"
>  - reg: physical base address of the hdmi and length of memory mapped
>  	region.
>  - interrupts: interrupt number to the cpu.
> @@ -13,6 +14,20 @@ Required properties:
>  	c) pin function mode.
>  	d) optional flags and pull up/down.
>  	e) drive strength.
> +- clocks: list of clock IDs from SoC clock driver.
> +	a) hdmi: It is required for gate operation on aclk_200_disp1 clock
> +		which clocks the display1 block.
> +	b) sclk_hdmi: It is required for gate operation on sclk_hdmi clock
> +		which clocks hdmi IP.
> +	c) sclk_pixel: Parent for mux mout_hdmi.
> +	d) sclk_hdmiphy: Parent for mux mout_hdmi.
> +	e) mout_hdmi: It is required by the driver to switch between the 2
> +		parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable
> +		after configuration, parent is set to sclk_hdmiphy else
> +		sclk_pixel.
> +- clock-names: aliases as per driver requirements for above clock IDs:
> +	"hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi".
> +- phy: this property holds the phandle for hdmiphy node.
>  
>  Example:
>  
> @@ -21,4 +36,8 @@ Example:
>  		reg = <0x14530000 0x100000>;
>  		interrupts = <0 95 0>;
>  		hpd-gpio = <&gpx3 7 0xf 1 3>;
> +		clocks = <&clock 344>, <&clock 136>, <&clock 137>,
> +				<&clock 157>, <&clock 1024>;
> +		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
> +				"sclk_hdmiphy", "mout_hdmi";
>  	};
> diff --git a/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt b/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt
> index fb688a6..e2b12ed 100644
> --- a/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt
> +++ b/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt
> @@ -1,8 +1,14 @@
>  Device-Tree bindings for hdmiphy driver
>  
>  Required properties:
> -- compatible: value should be "samsung,exynos4210-hdmiphy".
> -- reg: I2C address of the hdmiphy device.
> +- compatible: value should be one among the following
> +	1) Samsung,exynos4210-hdmiphy".
> +	2) Samsung,exynos5420-hdmiphy".
> +
> +- reg: it holds the physical address infomration for the hdmiphy device.
> +	If it is a i2c device, reg holds the I2C address of the phy. For
> +	platform bus mapped phy, reg property holds physical address as
> +	well as size of the register region.
>  
>  Example:
>  
> diff --git a/Documentation/devicetree/bindings/video/exynos_mixer.txt b/Documentation/devicetree/bindings/video/exynos_mixer.txt
> index a8b063f..38e4e5c 100644
> --- a/Documentation/devicetree/bindings/video/exynos_mixer.txt
> +++ b/Documentation/devicetree/bindings/video/exynos_mixer.txt
> @@ -4,10 +4,15 @@ Required properties:
>  - compatible: value should be:
>  	1) "samsung,exynos4210-mixer"
>  	2) "samsung,exynos5250-mixer"
> +	3) "samsung,exynos5420-mixer"
>  
>  - reg: physical base address of the mixer and length of memory mapped
>  	region.
>  - interrupts: interrupt number to the cpu.
> +- clocks: list of clock IDs from SoC clock driver.
> +	a) mixer: It is required for gate operation on aclk_200_disp1 clock
> +		which clocks the display1 block.
> +	b) sclk_hdmi: Parent for mux mout_mixer.
>  
>  Example:
>  
> @@ -15,4 +20,6 @@ Example:
>  		compatible = "samsung,exynos5250-mixer";
>  		reg = <0x14450000 0x10000>;
>  		interrupts = <0 94 0>;
> +		clocks = <&clock 343>, <&clock 136>;
> +		clock-names = "mixer", "sclk_hdmi";
>  	};
> -- 
> 1.7.10.4
> 
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss@xxxxxxxxxxxxxxxx
> https://lists.ozlabs.org/listinfo/devicetree-discuss

-- 
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies, Ltd.
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux