[PATCH 02/11] drm/msm/dpu: use the actual lm maximum width instead of a hardcoded value

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This avoids using two LMs instead of one when the display width is lower
than the maximum supported value. For example on MSM8996/MSM8998, the
actual maxwidth is 2560, so we would use two LMs for 1280x720 or
1920x1080 resolutions, while one is enough.

Signed-off-by: Arnaud Vrac <avrac@xxxxxxxxxx>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 1dc5dbe585723..dd2914726c4f6 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -53,8 +53,6 @@
 
 #define IDLE_SHORT_TIMEOUT	1
 
-#define MAX_HDISPLAY_SPLIT 1080
-
 /* timeout in frames waiting for frame done */
 #define DPU_ENCODER_FRAME_DONE_TIMEOUT_FRAMES 5
 
@@ -568,10 +566,12 @@ static struct msm_display_topology dpu_encoder_get_topology(
 	 */
 	if (intf_count == 2)
 		topology.num_lm = 2;
-	else if (!dpu_kms->catalog->caps->has_3d_merge)
-		topology.num_lm = 1;
+	else if (dpu_kms->catalog->caps->has_3d_merge &&
+		 dpu_kms->catalog->mixer_count > 0 &&
+		 mode->hdisplay > dpu_kms->catalog->mixer[0].sblk->maxwidth)
+		topology.num_lm = 2;
 	else
-		topology.num_lm = (mode->hdisplay > MAX_HDISPLAY_SPLIT) ? 2 : 1;
+		topology.num_lm = 1;
 
 	if (crtc_state->ctm)
 		topology.num_dspp = topology.num_lm;

-- 
2.40.0




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux