keeping checkpatch happy. Signed-off-by: Darren Etheridge <detheridge@xxxxxx> --- drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 16 ++++++++++------ 1 files changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c index 283e0a6..6118651 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c @@ -42,7 +42,8 @@ struct tilcdc_crtc { static void unref_worker(struct work_struct *work) { - struct tilcdc_crtc *tilcdc_crtc = container_of(work, struct tilcdc_crtc, work); + struct tilcdc_crtc *tilcdc_crtc = + container_of(work, struct tilcdc_crtc, work); struct drm_device *dev = tilcdc_crtc->base.dev; struct drm_framebuffer *fb; @@ -55,10 +56,12 @@ static void unref_worker(struct work_struct *work) static void set_scanout(struct drm_crtc *crtc, int n) { static const uint32_t base_reg[] = { - LCDC_DMA_FB_BASE_ADDR_0_REG, LCDC_DMA_FB_BASE_ADDR_1_REG, + LCDC_DMA_FB_BASE_ADDR_0_REG, + LCDC_DMA_FB_BASE_ADDR_1_REG, }; static const uint32_t ceil_reg[] = { - LCDC_DMA_FB_CEILING_ADDR_0_REG, LCDC_DMA_FB_CEILING_ADDR_1_REG, + LCDC_DMA_FB_CEILING_ADDR_0_REG, + LCDC_DMA_FB_CEILING_ADDR_1_REG, }; static const uint32_t stat[] = { LCDC_END_OF_FRAME0, LCDC_END_OF_FRAME1, @@ -194,7 +197,8 @@ static void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode) tilcdc_crtc->frame_done = false; stop(crtc); - /* if necessary wait for framedone irq which will still come + /* + * if necessary wait for framedone irq which will still come * before putting things to sleep.. */ if (priv->rev == 2) { @@ -504,7 +508,7 @@ int tilcdc_crtc_mode_valid(struct drm_crtc *crtc, struct drm_display_mode *mode) * configured from the DT */ if (mode->clock > priv->max_pixelclock) { - DBG("Pruning mode, pixel clock too high"); + DBG("Pruning mode: pixel clock too high"); return MODE_CLOCK_HIGH; } @@ -519,7 +523,7 @@ int tilcdc_crtc_mode_valid(struct drm_crtc *crtc, struct drm_display_mode *mode) bandwidth = mode->hdisplay * mode->vdisplay * drm_mode_vrefresh(mode); if (bandwidth > priv->max_bandwidth) { - DBG("Pruning mode, exceeds defined bandwidth limit"); + DBG("Pruning mode: exceeds defined bandwidth limit"); return MODE_BAD; } -- 1.7.0.4 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel