From: Sui Jingfeng <suijingfeng@xxxxxxxxxxx>
The crazy fbdev test of IGT may write after EOF, which lead to out-of-bound
access for the drm drivers using fbdev-generic. For example, run fbdev test
on a x86-64+ast2400 platform with 1680x1050 resolution will cause the linux
kernel hang with following call trace:
Oops: 0000 [#1] PREEMPT SMP PTI
[IGT] fbdev: starting subtest eof
Workqueue: events drm_fb_helper_damage_work [drm_kms_helper]
[IGT] fbdev: starting subtest nullptr
RIP: 0010:memcpy_erms+0xa/0x20
RSP: 0018:ffffa17d40167d98 EFLAGS: 00010246
RAX: ffffa17d4eb7fa80 RBX: ffffa17d40e0aa80 RCX: 00000000000014c0
RDX: 0000000000001a40 RSI: ffffa17d40e0b000 RDI: ffffa17d4eb80000
RBP: ffffa17d40167e20 R08: 0000000000000000 R09: ffff89522ecff8c0
R10: ffffa17d4e4c5000 R11: 0000000000000000 R12: ffffa17d4eb7fa80
R13: 0000000000001a40 R14: 000000000000041a R15: ffffa17d40167e30
FS: 0000000000000000(0000) GS:ffff895257380000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffa17d40e0b000 CR3: 00000001eaeca006 CR4: 00000000001706e0
Call Trace:
<TASK>
? drm_fbdev_generic_helper_fb_dirty+0x207/0x330 [drm_kms_helper]
drm_fb_helper_damage_work+0x8f/0x170 [drm_kms_helper]
process_one_work+0x21f/0x430
worker_thread+0x4e/0x3c0
? __pfx_worker_thread+0x10/0x10
kthread+0xf4/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
CR2: ffffa17d40e0b000
---[ end trace 0000000000000000 ]---
The indirect reason is drm_fb_helper_memory_range_to_clip() generate damage
rectangles which partially or completely go out of the active display area.
The second of argument 'off' is passing from the user-space, this will lead
to the out-of-bound if it is large than (fb_height + 1) * fb_pitches; while
DIV_ROUND_UP() may also controbute to error by 1.
This patch will add code to restrict the damage rect computed go beyond of
the last line of the framebuffer.
Signed-off-by: Sui Jingfeng <suijingfeng@xxxxxxxxxxx>
---
drivers/gpu/drm/drm_fb_helper.c | 16 ++++++++++++----
drivers/gpu/drm/drm_fbdev_generic.c | 2 +-
2 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 64458982be40..6bb1b8b27d7a 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -641,19 +641,27 @@ static void drm_fb_helper_damage(struct drm_fb_helper *helper, u32 x, u32 y,
static void drm_fb_helper_memory_range_to_clip(struct fb_info *info, off_t off, size_t len,
struct drm_rect *clip)
{
+ u32 line_length = info->fix.line_length;
+ u32 fb_height = info->var.yres;
off_t end = off + len;
u32 x1 = 0;
- u32 y1 = off / info->fix.line_length;
+ u32 y1 = off / line_length;
u32 x2 = info->var.xres;
- u32 y2 = DIV_ROUND_UP(end, info->fix.line_length);
+ u32 y2 = DIV_ROUND_UP(end, line_length);
+
+ /* Don't allow any of them beyond the bottom bound of display area */
+ if (y1 > fb_height)
+ y1 = fb_height;
+ if (y2 > fb_height)
+ y2 = fb_height;
if ((y2 - y1) == 1) {
/*
* We've only written to a single scanline. Try to reduce
* the number of horizontal pixels that need an update.
*/
- off_t bit_off = (off % info->fix.line_length) * 8;
- off_t bit_end = (end % info->fix.line_length) * 8;
+ off_t bit_off = (off % line_length) * 8;
+ off_t bit_end = (end % line_length) * 8;
x1 = bit_off / info->var.bits_per_pixel;
x2 = DIV_ROUND_UP(bit_end, info->var.bits_per_pixel);
diff --git a/drivers/gpu/drm/drm_fbdev_generic.c b/drivers/gpu/drm/drm_fbdev_generic.c
index 8e5148bf40bb..b057cfbba938 100644
--- a/drivers/gpu/drm/drm_fbdev_generic.c
+++ b/drivers/gpu/drm/drm_fbdev_generic.c
@@ -94,7 +94,7 @@ static int drm_fbdev_generic_helper_fb_probe(struct drm_fb_helper *fb_helper,
fb_helper->buffer = buffer;
fb_helper->fb = buffer->fb;
- screen_size = buffer->gem->size;
+ screen_size = sizes->surface_height * buffer->fb->pitches[0];
screen_buffer = vzalloc(screen_size);
if (!screen_buffer) {
ret = -ENOMEM;
--
2.25.1
