Re: [PATCH] drm/amd/display: Clean up some inconsistent indenting

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Wrong subject line?  Should be drm/gma500?

Alex

On Mon, Feb 20, 2023 at 10:45 PM Jiapeng Chong
<jiapeng.chong@xxxxxxxxxxxxxxxxx> wrote:
>
> No functional modification involved.
>
> drivers/gpu/drm/gma500/cdv_device.c:218 cdv_errata() warn: inconsistent indenting.
>
> Reported-by: Abaci Robot <abaci@xxxxxxxxxxxxxxxxx>
> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4126
> Signed-off-by: Jiapeng Chong <jiapeng.chong@xxxxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/gma500/cdv_device.c | 27 ++++++++++++++++-----------
>  1 file changed, 16 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/gma500/cdv_device.c b/drivers/gpu/drm/gma500/cdv_device.c
> index 3e83299113e3..765f359365b9 100644
> --- a/drivers/gpu/drm/gma500/cdv_device.c
> +++ b/drivers/gpu/drm/gma500/cdv_device.c
> @@ -78,7 +78,8 @@ static u32 cdv_get_max_backlight(struct drm_device *dev)
>         if (max == 0) {
>                 DRM_DEBUG_KMS("LVDS Panel PWM value is 0!\n");
>                 /* i915 does this, I believe which means that we should not
> -                * smash PWM control as firmware will take control of it. */
> +                * smash PWM control as firmware will take control of it.
> +                */
>                 return 1;
>         }
>
> @@ -149,6 +150,7 @@ static inline u32 CDV_MSG_READ32(int domain, uint port, uint offset)
>         int mcr = (0x10<<24) | (port << 16) | (offset << 8);
>         uint32_t ret_val = 0;
>         struct pci_dev *pci_root = pci_get_domain_bus_and_slot(domain, 0, 0);
> +
>         pci_write_config_dword(pci_root, 0xD0, mcr);
>         pci_read_config_dword(pci_root, 0xD4, &ret_val);
>         pci_dev_put(pci_root);
> @@ -160,6 +162,7 @@ static inline void CDV_MSG_WRITE32(int domain, uint port, uint offset,
>  {
>         int mcr = (0x11<<24) | (port << 16) | (offset << 8) | 0xF0;
>         struct pci_dev *pci_root = pci_get_domain_bus_and_slot(domain, 0, 0);
> +
>         pci_write_config_dword(pci_root, 0xD4, value);
>         pci_write_config_dword(pci_root, 0xD0, mcr);
>         pci_dev_put(pci_root);
> @@ -180,10 +183,8 @@ static void cdv_init_pm(struct drm_device *dev)
>         int domain = pci_domain_nr(pdev->bus);
>         int i;
>
> -       dev_priv->apm_base = CDV_MSG_READ32(domain, PSB_PUNIT_PORT,
> -                                                       PSB_APMBA) & 0xFFFF;
> -       dev_priv->ospm_base = CDV_MSG_READ32(domain, PSB_PUNIT_PORT,
> -                                                       PSB_OSPMBA) & 0xFFFF;
> +       dev_priv->apm_base = CDV_MSG_READ32(domain, PSB_PUNIT_PORT, PSB_APMBA) & 0xFFFF;
> +       dev_priv->ospm_base = CDV_MSG_READ32(domain, PSB_PUNIT_PORT, PSB_OSPMBA) & 0xFFFF;
>
>         /* Power status */
>         pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD);
> @@ -196,6 +197,7 @@ static void cdv_init_pm(struct drm_device *dev)
>         /* Wait for the GPU power */
>         for (i = 0; i < 5; i++) {
>                 u32 pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS);
> +
>                 if ((pwr_sts & PSB_PWRGT_GFX_MASK) == 0)
>                         return;
>                 udelay(10);
> @@ -215,7 +217,7 @@ static void cdv_errata(struct drm_device *dev)
>          *      Bonus Launch to work around the issue, by degrading
>          *      performance.
>          */
> -        CDV_MSG_WRITE32(pci_domain_nr(pdev->bus), 3, 0x30, 0x08027108);
> +       CDV_MSG_WRITE32(pci_domain_nr(pdev->bus), 3, 0x30, 0x08027108);
>  }
>
>  /**
> @@ -401,20 +403,21 @@ static int cdv_power_up(struct drm_device *dev)
>
>  static void cdv_hotplug_work_func(struct work_struct *work)
>  {
> -        struct drm_psb_private *dev_priv = container_of(work, struct drm_psb_private,
> +       struct drm_psb_private *dev_priv = container_of(work, struct drm_psb_private,
>                                                         hotplug_work);
>         struct drm_device *dev = &dev_priv->dev;
>
> -        /* Just fire off a uevent and let userspace tell us what to do */
> -        drm_helper_hpd_irq_event(dev);
> +       /* Just fire off a uevent and let userspace tell us what to do */
> +       drm_helper_hpd_irq_event(dev);
>  }
>
>  /* The core driver has received a hotplug IRQ. We are in IRQ context
> -   so extract the needed information and kick off queued processing */
> -
> + * so extract the needed information and kick off queued processing
> + */
>  static int cdv_hotplug_event(struct drm_device *dev)
>  {
>         struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
> +
>         schedule_work(&dev_priv->hotplug_work);
>         REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT));
>         return 1;
> @@ -424,6 +427,7 @@ static void cdv_hotplug_enable(struct drm_device *dev, bool on)
>  {
>         if (on) {
>                 u32 hotplug = REG_READ(PORT_HOTPLUG_EN);
> +
>                 hotplug |= HDMIB_HOTPLUG_INT_EN | HDMIC_HOTPLUG_INT_EN |
>                            HDMID_HOTPLUG_INT_EN | CRT_HOTPLUG_INT_EN;
>                 REG_WRITE(PORT_HOTPLUG_EN, hotplug);
> @@ -549,6 +553,7 @@ static const struct psb_offset cdv_regmap[2] = {
>  static int cdv_chip_setup(struct drm_device *dev)
>  {
>         struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
> +
>         INIT_WORK(&dev_priv->hotplug_work, cdv_hotplug_work_func);
>
>         dev_priv->use_msi = true;
> --
> 2.20.1.7.g153144c
>



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux