[PATCH] drm/radeon: use 10khz units for audio dto calculation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Alex Deucher <alexander.deucher@xxxxxxx>

May produce better results with some modes and also avoids
overflows on DCE2.x/3.x devices.

Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
 drivers/gpu/drm/radeon/evergreen_hdmi.c |    7 +++----
 drivers/gpu/drm/radeon/r600_hdmi.c      |   11 +++++------
 2 files changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c
index b4ab8ce..84d6822 100644
--- a/drivers/gpu/drm/radeon/evergreen_hdmi.c
+++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c
@@ -154,19 +154,18 @@ static void evergreen_audio_set_dto(struct drm_encoder *encoder, u32 clock)
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 	struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
 	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
-	u32 base_rate = 48000;
+	u32 base_rate = 24000;
 
 	if (!dig || !dig->afmt)
 		return;
 
-	/* XXX: properly calculate this */
 	/* XXX two dtos; generally use dto0 for hdmi */
 	/* Express [24MHz / target pixel clock] as an exact rational
 	 * number (coefficient of two integer numbers.  DCCG_AUDIO_DTOx_PHASE
 	 * is the numerator, DCCG_AUDIO_DTOx_MODULE is the denominator
 	 */
-	WREG32(DCCG_AUDIO_DTO0_PHASE, (base_rate*50) & 0xffffff);
-	WREG32(DCCG_AUDIO_DTO0_MODULE, (clock*100) & 0xffffff);
+	WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate / 10);
+	WREG32(DCCG_AUDIO_DTO0_MODULE, clock / 10);
 	WREG32(DCCG_AUDIO_DTO_SOURCE, DCCG_AUDIO_DTO0_SOURCE_SEL(radeon_crtc->crtc_id));
 }
 
diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c
index 47f180a..70c4ecb 100644
--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -232,7 +232,7 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock)
 	struct radeon_device *rdev = dev->dev_private;
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 	struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
-	u32 base_rate = 48000;
+	u32 base_rate = 24000;
 
 	if (!dig || !dig->afmt)
 		return;
@@ -240,7 +240,6 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock)
 	/* there are two DTOs selected by DCCG_AUDIO_DTO_SELECT.
 	 * doesn't matter which one you use.  Just use the first one.
 	 */
-	/* XXX: properly calculate this */
 	/* XXX two dtos; generally use dto0 for hdmi */
 	/* Express [24MHz / target pixel clock] as an exact rational
 	 * number (coefficient of two integer numbers.  DCCG_AUDIO_DTOx_PHASE
@@ -250,13 +249,13 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock)
 		/* according to the reg specs, this should DCE3.2 only, but in
 		 * practice it seems to cover DCE3.0 as well.
 		 */
-		WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 50);
-		WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100);
+		WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate / 10);
+		WREG32(DCCG_AUDIO_DTO0_MODULE, clock / 10);
 		WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */
 	} else {
 		/* according to the reg specs, this should be DCE2.0 and DCE3.0 */
-		WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate * 50) |
-		       AUDIO_DTO_MODULE(clock * 100));
+		WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate / 10) |
+		       AUDIO_DTO_MODULE(clock / 10));
 	}
 }
 
-- 
1.7.7.5

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux