From: Dom Cobley <popcornmix@xxxxxxxxx> The formula that determines the core clock requirement based on pixel clock and blanking has been determined experimentally to minimise the clock while supporting all modes we've seen. A new reduced blanking mode (4kp60 at 533MHz rather than the standard 594MHz) has been seen that doesn't produce a high enough clock and results in "flip_done timed out" error. Increase the setup cost in the formula to make this work. The result is a reduced blanking mode increases by up to 7MHz while leaving the standard timing mode untouched Link: https://github.com/raspberrypi/linux/issues/4446 Fixes: 16e101051f32 ("drm/vc4: Increase the core clock based on HVS load") Signed-off-by: Dom Cobley <popcornmix@xxxxxxxxx> Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx> --- drivers/gpu/drm/vc4/vc4_crtc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c index cdc0559221f0..bef9d45ef1df 100644 --- a/drivers/gpu/drm/vc4/vc4_crtc.c +++ b/drivers/gpu/drm/vc4/vc4_crtc.c @@ -722,7 +722,7 @@ int vc4_crtc_atomic_check(struct drm_crtc *crtc, struct vc4_encoder *vc4_encoder = to_vc4_encoder(encoder); if (vc4_encoder->type == VC4_ENCODER_TYPE_HDMI0) { - vc4_state->hvs_load = max(mode->clock * mode->hdisplay / mode->htotal + 1000, + vc4_state->hvs_load = max(mode->clock * mode->hdisplay / mode->htotal + 8000, mode->clock * 9 / 10) * 1000; } else { vc4_state->hvs_load = mode->clock * 1000; -- 2.39.1
