Hello,
The following patches:
- Add support for configuring the width-mm and height-mm DRM mode
properties in the SimpleDRM driver via Device Tree
- Document these two new Device Tree properties
This is useful for allowing interfaces such as Phosh to calculate
proper scaling values and for early boot code knowing if hi-dpi
rendering is necessary.
Changes since v3:
- Use panel node
Rayyan Ansari (2):
drm/simpledrm: Allow physical width and height configuration via panel
node
dt-bindings: display: simple-framebuffer: Document the panel node
.../bindings/display/simple-framebuffer.yaml | 9 ++++++
drivers/gpu/drm/tiny/simpledrm.c | 32 +++++++++++++------
2 files changed, 32 insertions(+), 9 deletions(-)
--
2.39.1
