Re: [PATCH v3 4/6] ARM: dts: omap: Use new media bus type macros

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tony, could you take this patch in your tree for v6.3 ? The two patches
that it depends on have both been merged in v6.2.

On Thu, Jun 16, 2022 at 01:14:08AM +0300, Laurent Pinchart wrote:
> Now that a header exists with macros for the media interface bus-type
> values, replace hardcoding numerical constants with the corresponding
> macros in the DT sources.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/omap3-n900.dts | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
> index d40c3d2c4914..9cad9d6a83e2 100644
> --- a/arch/arm/boot/dts/omap3-n900.dts
> +++ b/arch/arm/boot/dts/omap3-n900.dts
> @@ -9,6 +9,7 @@
>  #include "omap34xx.dtsi"
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/leds/common.h>
> +#include <dt-bindings/media/video-interfaces.h>
>  
>  /*
>   * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
> @@ -194,7 +195,7 @@ port@1 {
>  
>  			csi_isp: endpoint {
>  				remote-endpoint = <&csi_cam1>;
> -				bus-type = <3>; /* CCP2 */
> +				bus-type = <MEDIA_BUS_TYPE_CCP2>;
>  				clock-lanes = <1>;
>  				data-lanes = <0>;
>  				lane-polarity = <0 0>;
> @@ -835,7 +836,7 @@ cam1: camera@3e {
>  
>  		port {
>  			csi_cam1: endpoint {
> -				bus-type = <3>; /* CCP2 */
> +				bus-type = <MEDIA_BUS_TYPE_CCP2>;
>  				strobe = <1>;
>  				clock-inv = <0>;
>  				crc = <1>;

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux