Add a simple wrapper driver for the DWC HDMI bridge driver that
implements the few bits that are necessary to abstract the i.MX8MP
SoC integration.
Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Tested-by: Marek Vasut <marex@xxxxxxx>
---
drivers/gpu/drm/bridge/imx/Kconfig | 9 ++
drivers/gpu/drm/bridge/imx/Makefile | 2 +
drivers/gpu/drm/bridge/imx/imx8mp-hdmi.c | 140 +++++++++++++++++++++++
3 files changed, 151 insertions(+)
create mode 100644 drivers/gpu/drm/bridge/imx/imx8mp-hdmi.c
diff --git a/drivers/gpu/drm/bridge/imx/Kconfig b/drivers/gpu/drm/bridge/imx/Kconfig
index 608f47f41bcd..d828d8bfd893 100644
--- a/drivers/gpu/drm/bridge/imx/Kconfig
+++ b/drivers/gpu/drm/bridge/imx/Kconfig
@@ -44,4 +44,13 @@ config DRM_IMX8QXP_PIXEL_LINK_TO_DPI
Choose this to enable pixel link to display pixel interface(PXL2DPI)
found in Freescale i.MX8qxp processor.
+config DRM_IMX8MP_DW_HDMI_BRIDGE
+ tristate "i.MX8MP HDMI bridge support"
+ depends on OF
+ depends on COMMON_CLK
+ select DRM_DW_HDMI
+ help
+ Choose this to enable support for the internal HDMI encoder found
+ on the i.MX8MP SoC.
+
endif # ARCH_MXC || COMPILE_TEST
diff --git a/drivers/gpu/drm/bridge/imx/Makefile b/drivers/gpu/drm/bridge/imx/Makefile
index aa90ec8d5433..03b0074ae538 100644
--- a/drivers/gpu/drm/bridge/imx/Makefile
+++ b/drivers/gpu/drm/bridge/imx/Makefile
@@ -7,3 +7,5 @@ obj-$(CONFIG_DRM_IMX8QXP_LDB) += imx8qxp-ldb.o
obj-$(CONFIG_DRM_IMX8QXP_PIXEL_COMBINER) += imx8qxp-pixel-combiner.o
obj-$(CONFIG_DRM_IMX8QXP_PIXEL_LINK) += imx8qxp-pixel-link.o
obj-$(CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI) += imx8qxp-pxl2dpi.o
+
+obj-$(CONFIG_DRM_IMX8MP_DW_HDMI_BRIDGE) += imx8mp-hdmi.o
diff --git a/drivers/gpu/drm/bridge/imx/imx8mp-hdmi.c b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi.c
new file mode 100644
index 000000000000..06849b817aed
--- /dev/null
+++ b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi.c
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Copyright (C) 2022 Pengutronix, Lucas Stach <kernel@xxxxxxxxxxxxxx>
+ */
+
+#include <drm/bridge/dw_hdmi.h>
+#include <drm/drm_modes.h>
+#include <linux/clk.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+struct imx8mp_hdmi {
+ struct dw_hdmi_plat_data plat_data;
+ struct dw_hdmi *dw_hdmi;
+ struct clk *pixclk;
+ struct clk *fdcc;
+};
+
+static enum drm_mode_status
+imx8mp_hdmi_mode_valid(struct dw_hdmi *dw_hdmi, void *data,
+ const struct drm_display_info *info,
+ const struct drm_display_mode *mode)
+{
+ struct imx8mp_hdmi *hdmi = (struct imx8mp_hdmi *)data;
+
+ if (mode->clock < 13500)
+ return MODE_CLOCK_LOW;
+
+ if (mode->clock > 297000)
+ return MODE_CLOCK_HIGH;
+
+ if (clk_round_rate(hdmi->pixclk, mode->clock * 1000) !=
+ mode->clock * 1000)
+ return MODE_CLOCK_RANGE;
+
+ /* We don't support double-clocked and Interlaced modes */
+ if ((mode->flags & DRM_MODE_FLAG_DBLCLK) ||
+ (mode->flags & DRM_MODE_FLAG_INTERLACE))
+ return MODE_BAD;
+
+ return MODE_OK;
+}
+
+static int imx8mp_hdmi_phy_init(struct dw_hdmi *dw_hdmi, void *data,
+ const struct drm_display_info *display,
+ const struct drm_display_mode *mode)
+{
+ return 0;
+}
+
+static void imx8mp_hdmi_phy_disable(struct dw_hdmi *dw_hdmi, void *data)
+{
+}
+
+static void im8mp_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
+{
+ /*
+ * Just release PHY core from reset, all other power management is done
+ * by the PHY driver.
+ */
+ dw_hdmi_phy_gen1_reset(hdmi);
+
+ dw_hdmi_phy_setup_hpd(hdmi, data);
+}
+
+static const struct dw_hdmi_phy_ops imx8mp_hdmi_phy_ops = {
+ .init = imx8mp_hdmi_phy_init,
+ .disable = imx8mp_hdmi_phy_disable,
+ .setup_hpd = im8mp_hdmi_phy_setup_hpd,
+ .read_hpd = dw_hdmi_phy_read_hpd,
+ .update_hpd = dw_hdmi_phy_update_hpd,
+};
+
+static int imx8mp_dw_hdmi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct dw_hdmi_plat_data *plat_data;
+ struct imx8mp_hdmi *hdmi;
+ int ret;
+
+ hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
+ if (!hdmi)
+ return -ENOMEM;
+
+ plat_data = &hdmi->plat_data;
+
+ hdmi->pixclk = devm_clk_get(dev, "pix");
+ if (IS_ERR(hdmi->pixclk))
+ return dev_err_probe(dev, PTR_ERR(hdmi->pixclk),
+ "Unable to get pixel clock\n");
+
+ hdmi->fdcc = devm_clk_get_enabled(dev, "fdcc");
+ if (IS_ERR(hdmi->fdcc))
+ return dev_err_probe(dev, PTR_ERR(hdmi->fdcc),
+ "Unable to get FDCC clock\n");
+
+ plat_data->mode_valid = imx8mp_hdmi_mode_valid;
+ plat_data->phy_ops = &imx8mp_hdmi_phy_ops;
+ plat_data->phy_name = "SAMSUNG HDMI TX PHY";
+ plat_data->priv_data = hdmi;
+
+ hdmi->dw_hdmi = dw_hdmi_probe(pdev, plat_data);
+ if (IS_ERR(hdmi->dw_hdmi))
+ return PTR_ERR(hdmi->dw_hdmi);
+
+ platform_set_drvdata(pdev, hdmi);
+
+ return 0;
+}
+
+static int imx8mp_dw_hdmi_remove(struct platform_device *pdev)
+{
+ struct imx8mp_hdmi *hdmi = platform_get_drvdata(pdev);
+
+ dw_hdmi_remove(hdmi->dw_hdmi);
+
+ return 0;
+}
+
+static const struct of_device_id imx8mp_dw_hdmi_of_table[] = {
+ { .compatible = "fsl,imx8mp-hdmi" },
+ { /* Sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, imx8mp_dw_hdmi_of_table);
+
+static struct platform_driver imx8mp_dw_hdmi_platform_driver = {
+ .probe = imx8mp_dw_hdmi_probe,
+ .remove = imx8mp_dw_hdmi_remove,
+ .driver = {
+ .name = "imx8mp-dw-hdmi",
+ .of_match_table = imx8mp_dw_hdmi_of_table,
+ },
+};
+
+module_platform_driver(imx8mp_dw_hdmi_platform_driver);
+
+MODULE_DESCRIPTION("i.MX8MP HDMI encoder driver");
+MODULE_LICENSE("GPL");
--
2.30.2
