The ILI9486 driver is wrongly assuming that the SPI panel is interfaced
only with 8-bit SPI controllers and consequently that the pixel data
passed by the MIPI DBI subsystem are already swapped before being sent
over SPI using 8 bits-per-word.
This is not always true for all the SPI controllers.
Make the command function more general to not only support 8-bit only
SPI controllers and support sending un-swapped data over SPI using 16
bits-per-word when dealing with pixel data.
Signed-off-by: Carlo Caione <ccaione@xxxxxxxxxxxx>
---
drivers/gpu/drm/tiny/ili9486.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/tiny/ili9486.c b/drivers/gpu/drm/tiny/ili9486.c
index bd37dfe8dd05..4d80a413338f 100644
--- a/drivers/gpu/drm/tiny/ili9486.c
+++ b/drivers/gpu/drm/tiny/ili9486.c
@@ -43,6 +43,7 @@ static int waveshare_command(struct mipi_dbi *mipi, u8 *cmd, u8 *par,
size_t num)
{
struct spi_device *spi = mipi->spi;
+ unsigned int bpw = 8;
void *data = par;
u32 speed_hz;
int i, ret;
@@ -56,8 +57,6 @@ static int waveshare_command(struct mipi_dbi *mipi, u8 *cmd, u8 *par,
* The displays are Raspberry Pi HATs and connected to the 8-bit only
* SPI controller, so 16-bit command and parameters need byte swapping
* before being transferred as 8-bit on the big endian SPI bus.
- * Pixel data bytes have already been swapped before this function is
- * called.
*/
buf[0] = cpu_to_be16(*cmd);
gpiod_set_value_cansleep(mipi->dc, 0);
@@ -71,12 +70,18 @@ static int waveshare_command(struct mipi_dbi *mipi, u8 *cmd, u8 *par,
for (i = 0; i < num; i++)
buf[i] = cpu_to_be16(par[i]);
num *= 2;
- speed_hz = mipi_dbi_spi_cmd_max_speed(spi, num);
data = buf;
}
+ /*
+ * Check whether pixel data bytes needs to be swapped or not
+ */
+ if (*cmd == MIPI_DCS_WRITE_MEMORY_START && !mipi->swap_bytes)
+ bpw = 16;
+
gpiod_set_value_cansleep(mipi->dc, 1);
- ret = mipi_dbi_spi_transfer(spi, speed_hz, 8, data, num);
+ speed_hz = mipi_dbi_spi_cmd_max_speed(spi, num);
+ ret = mipi_dbi_spi_transfer(spi, speed_hz, bpw, data, num);
free:
kfree(buf);
--
b4 0.10.1
