On Sun, Mar 31, 2013 at 1:38 PM, Kero <kero@xxxxxxxxx> wrote: > From: Kero van Gelder <kero@xxxxxxxxx> > > Both VGA and HDMI connectors are available on my Asus EeePC X101CH. > This patch will cause output to be shown on either when plugged in. > For both, it shows the leftmost 800x600, of the 1024x600 on LVDS. > > Signed-off-by: Kero van Gelder <kero@xxxxxxxxx> > --- > diff --git a/drivers/gpu/drm/gma500/cdv_intel_crt.c b/drivers/gpu/drm/gma500/cdv_intel_crt.c > index 8c17534..7b8386f 100644 > --- a/drivers/gpu/drm/gma500/cdv_intel_crt.c > +++ b/drivers/gpu/drm/gma500/cdv_intel_crt.c > @@ -276,6 +276,7 @@ void cdv_intel_crt_init(struct drm_device *dev, > goto failed_connector; > > connector = &psb_intel_connector->base; > + connector->polled = DRM_CONNECTOR_POLL_HPD; > drm_connector_init(dev, connector, > &cdv_intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA); > > diff --git a/drivers/gpu/drm/gma500/cdv_intel_hdmi.c b/drivers/gpu/drm/gma500/cdv_intel_hdmi.c > index e223b50..464153d 100644 > --- a/drivers/gpu/drm/gma500/cdv_intel_hdmi.c > +++ b/drivers/gpu/drm/gma500/cdv_intel_hdmi.c > @@ -319,6 +319,7 @@ void cdv_hdmi_init(struct drm_device *dev, > goto err_priv; > > connector = &psb_intel_connector->base; > + connector->polled = DRM_CONNECTOR_POLL_HPD; > encoder = &psb_intel_encoder->base; > drm_connector_init(dev, connector, > &cdv_hdmi_connector_funcs, > -- Your patch has been applied to: https://github.com/patjak/drm-gma500.git gma500-next We might also consider polling if this causes problems for people, but for now this is fine. No biggie, but your tabs where converted to spaces so I recommend running checkpatch.pl before submitting. Thanks Patrik Jakobsson _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
