From: Philippe Schenker <philippe.schenker@xxxxxxxxxxx> This patch-set fixes the lt8912b driver that currently does not take care whether or not the attached display has postiive or negative syncs and or reports on EDID if it needs HDMI mode or DVI. This series addresses also an issue where the LVDS startup sequence was written to the wrong I2C address (the lt8912 has three). This caused writing into reserved registers and causing an unstable HDMI picture that manifests itself only sometimes and depending on the monitor with a flickering and a repeating of going black and coming up again. While at it move also some sensible comments to the sequence. Francesco Dolcini (2): drm/bridge: lt8912b: fix corrupted image output drm/bridge: lt8912b: clarify lvds output status Philippe Schenker (2): drm/bridge: lt8912b: add vsync hsync drm/bridge: lt8912b: set hdmi or dvi mode drivers/gpu/drm/bridge/lontium-lt8912b.c | 39 +++++++++++++++++------- 1 file changed, 28 insertions(+), 11 deletions(-) -- 2.37.3
