Currently there is no protection against a user trying to set an unsupported mode on DSI. Implement a check based on the opp table whether the byte clock for the mode can be supported by validating whether an opp table entry exists. For devices which have not added opp table support yet, skip this check otherwise it will break bootup on those devices. Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/15 Reported-by: Rob Clark <robdclark@xxxxxxxxx> Signed-off-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> --- drivers/gpu/drm/msm/dsi/dsi_manager.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c index 3a1417397283..87b518c42965 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c @@ -450,6 +450,29 @@ static enum drm_mode_status dsi_mgr_bridge_mode_valid(struct drm_bridge *bridge, int id = dsi_mgr_bridge_get_id(bridge); struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); struct mipi_dsi_host *host = msm_dsi->host; + struct platform_device *pdev = msm_dsi->pdev; + struct dev_pm_opp *opp; + struct opp_table *opp_tbl; + unsigned long byte_clk_rate; + + byte_clk_rate = dsi_byte_clk_get_rate(host, IS_BONDED_DSI(), mode); + + /* + * first check if there is an opp table available for the calculated + * byte clock and then check DSC related info. Some devices have not + * added support for OPP table. Skip the check for those. + */ + opp_tbl = dev_pm_opp_get_opp_table(&pdev->dev); + if (opp_tbl) { + opp = dev_pm_opp_find_freq_ceil(&pdev->dev, &byte_clk_rate); + if (IS_ERR(opp)) { + pr_err("opp table not found for freq %lu err: %ld\n", + byte_clk_rate, PTR_ERR(opp)); + return PTR_ERR(opp); + } + dev_pm_opp_put(opp); + dev_pm_opp_put_opp_table(opp_tbl); + } return msm_dsi_host_check_dsc(host, mode); } -- 2.7.4
