For EDID, please refer to the attachment on the link. https://gitlab.freedesktop.org/drm/intel/-/issues/6153#note_1558419 Regards William -----Original Message----- From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx> Sent: Tuesday, September 20, 2022 2:49 PM To: Tseng, William <william.tseng@xxxxxxxxx>; dri-devel@xxxxxxxxxxxxxxxxxxxxx Cc: Tseng, William <william.tseng@xxxxxxxxx>; Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>; Wayne Lin <waynelin@xxxxxxx>; Lee, Shawn C <shawn.c.lee@xxxxxxxxx> Subject: Re: [PATCH v4] drm/edid: ignore the CEA modes not defined in CEA-861-D On Tue, 20 Sep 2022, William Tseng <william.tseng@xxxxxxxxx> wrote: > This is a workaround for HDMI 1.4 sink which has a CEA mode with > higher vic than what is defined in CEA-861-D. > > As an example, a HDMI 1.4 sink has the video format 2560x1080p to be > displayed and the video format is indicated by both SVD (with vic 90 > and picture aspect ratio 64:27) and DTD. When connecting to such > sink, source can't output the video format in SVD because an error is > returned by drm_hdmi_avi_infoframe_from_display_mode(), which can't > fill the infoframe with picture aspect ratio 64:27 and the vic, which > is originally 90 and is changed to 0 by drm_mode_cea_vic(). > > To work around it, do not set the vic 0 so the corresponding mode may > be accepted in drm_hdmi_avi_infoframe_from_display_mode() and be dispalyed. > > v1: initial version. > v2: change the logic in drm_hdmi_avi_infoframe_from_display_mode(). > v3: fix typo. > v4: add revision history. > > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx> > Cc: Wayne Lin <waynelin@xxxxxxx> > Cc: Lee Shawn C <shawn.c.lee@xxxxxxxxx> > Signed-off-by: William Tseng <william.tseng@xxxxxxxxx> Please attach the offending EDID to the bug [1]. I won't ack this before we see the EDID in question. BR, Jani. [1] https://gitlab.freedesktop.org/drm/intel/-/issues/6153 > --- > drivers/gpu/drm/drm_edid.c | 10 ++++++---- > 1 file changed, 6 insertions(+), 4 deletions(-) > > diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c > index eaa819381281..3c6a4e09b2d6 100644 > --- a/drivers/gpu/drm/drm_edid.c > +++ b/drivers/gpu/drm/drm_edid.c > @@ -6640,7 +6640,8 @@ static u8 drm_mode_hdmi_vic(const struct > drm_connector *connector, } > > static u8 drm_mode_cea_vic(const struct drm_connector *connector, > - const struct drm_display_mode *mode) > + const struct drm_display_mode *mode, > + bool is_hdmi2_sink) > { > u8 vic; > > @@ -6660,7 +6661,7 @@ static u8 drm_mode_cea_vic(const struct drm_connector *connector, > * HDMI 2.0 VIC range: 1 <= VIC <= 107 (CEA-861-F). So we > * have to make sure we dont break HDMI 1.4 sinks. > */ > - if (!is_hdmi2_sink(connector) && vic > 64) > + if (!is_hdmi2_sink && vic > 64) > return 0; > > return vic; > @@ -6691,7 +6692,7 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame, > if (mode->flags & DRM_MODE_FLAG_DBLCLK) > frame->pixel_repeat = 1; > > - vic = drm_mode_cea_vic(connector, mode); > + vic = drm_mode_cea_vic(connector, mode, true); > hdmi_vic = drm_mode_hdmi_vic(connector, mode); > > frame->picture_aspect = HDMI_PICTURE_ASPECT_NONE; @@ -6735,7 +6736,8 > @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame, > picture_aspect = HDMI_PICTURE_ASPECT_NONE; > } > > - frame->video_code = vic; > + frame->video_code = drm_mode_cea_vic(connector, mode, > + is_hdmi2_sink(connector)); > frame->picture_aspect = picture_aspect; > frame->active_aspect = HDMI_ACTIVE_ASPECT_PICTURE; > frame->scan_mode = HDMI_SCAN_MODE_UNDERSCAN; -- Jani Nikula, Intel Open Source Graphics Center
