From: Xinlei Lee <xinlei.lee@xxxxxxxxxxxx>
Modify dpi power on/off sequence so that the first gpio operation will take effect.
Fixes: 6bd4763fd532 ("drm/mediatek: set dpi pin mode to gpio low to avoid leakage
current")
Signed-off-by: Xinlei Lee <xinlei.lee@xxxxxxxxxxxx>
---
Base on the branch of Linux-next/master.
Because dpi power_on/off is protected by dpi->refcount, the first time
it cannot be powered on and off successfully, it will cause leakage.
---
---
drivers/gpu/drm/mediatek/mtk_dpi.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 630a4e301ef6..2ce1a39ce3bf 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -462,9 +462,6 @@ static void mtk_dpi_power_off(struct mtk_dpi *dpi)
if (--dpi->refcount != 0)
return;
- if (dpi->pinctrl && dpi->pins_gpio)
- pinctrl_select_state(dpi->pinctrl, dpi->pins_gpio);
-
mtk_dpi_disable(dpi);
clk_disable_unprepare(dpi->pixel_clk);
clk_disable_unprepare(dpi->engine_clk);
@@ -489,9 +486,6 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
goto err_pixel;
}
- if (dpi->pinctrl && dpi->pins_dpi)
- pinctrl_select_state(dpi->pinctrl, dpi->pins_dpi);
-
return 0;
err_pixel:
@@ -721,6 +715,9 @@ static void mtk_dpi_bridge_disable(struct drm_bridge *bridge)
{
struct mtk_dpi *dpi = bridge_to_dpi(bridge);
+ if (dpi->pinctrl && dpi->pins_gpio)
+ pinctrl_select_state(dpi->pinctrl, dpi->pins_gpio);
+
mtk_dpi_power_off(dpi);
}
@@ -728,6 +725,9 @@ static void mtk_dpi_bridge_enable(struct drm_bridge *bridge)
{
struct mtk_dpi *dpi = bridge_to_dpi(bridge);
+ if (dpi->pinctrl && dpi->pins_dpi)
+ pinctrl_select_state(dpi->pinctrl, dpi->pins_dpi);
+
mtk_dpi_power_on(dpi);
mtk_dpi_set_display_mode(dpi, &dpi->mode);
mtk_dpi_enable(dpi);
--
2.18.0
