Hi Lucas, Thank you for the patch. On Fri, Aug 26, 2022 at 09:24:22PM +0200, Lucas Stach wrote: > Add a simple wrapper driver for the DWC HDMI bridge driver that > implements the few bits that are necessary to abstract the i.MX8MP > SoC integration. > > Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx> > Tested-by: Marek Vasut <marex@xxxxxxx> > --- > drivers/gpu/drm/bridge/imx/Kconfig | 9 ++ > drivers/gpu/drm/bridge/imx/Makefile | 2 + > drivers/gpu/drm/bridge/imx/imx8mp-hdmi.c | 141 +++++++++++++++++++++++ > 3 files changed, 152 insertions(+) > create mode 100644 drivers/gpu/drm/bridge/imx/imx8mp-hdmi.c > > diff --git a/drivers/gpu/drm/bridge/imx/Kconfig b/drivers/gpu/drm/bridge/imx/Kconfig > index 608f47f41bcd..d828d8bfd893 100644 > --- a/drivers/gpu/drm/bridge/imx/Kconfig > +++ b/drivers/gpu/drm/bridge/imx/Kconfig > @@ -44,4 +44,13 @@ config DRM_IMX8QXP_PIXEL_LINK_TO_DPI > Choose this to enable pixel link to display pixel interface(PXL2DPI) > found in Freescale i.MX8qxp processor. > > +config DRM_IMX8MP_DW_HDMI_BRIDGE > + tristate "i.MX8MP HDMI bridge support" > + depends on OF > + depends on COMMON_CLK > + select DRM_DW_HDMI > + help > + Choose this to enable support for the internal HDMI encoder found > + on the i.MX8MP SoC. > + > endif # ARCH_MXC || COMPILE_TEST > diff --git a/drivers/gpu/drm/bridge/imx/Makefile b/drivers/gpu/drm/bridge/imx/Makefile > index aa90ec8d5433..03b0074ae538 100644 > --- a/drivers/gpu/drm/bridge/imx/Makefile > +++ b/drivers/gpu/drm/bridge/imx/Makefile > @@ -7,3 +7,5 @@ obj-$(CONFIG_DRM_IMX8QXP_LDB) += imx8qxp-ldb.o > obj-$(CONFIG_DRM_IMX8QXP_PIXEL_COMBINER) += imx8qxp-pixel-combiner.o > obj-$(CONFIG_DRM_IMX8QXP_PIXEL_LINK) += imx8qxp-pixel-link.o > obj-$(CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI) += imx8qxp-pxl2dpi.o > + > +obj-$(CONFIG_DRM_IMX8MP_DW_HDMI_BRIDGE) += imx8mp-hdmi.o > diff --git a/drivers/gpu/drm/bridge/imx/imx8mp-hdmi.c b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi.c > new file mode 100644 > index 000000000000..66089bc690c8 > --- /dev/null > +++ b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi.c > @@ -0,0 +1,141 @@ > +// SPDX-License-Identifier: GPL-2.0+ > + > +/* > + * Copyright (C) 2022 Pengutronix, Lucas Stach <kernel@xxxxxxxxxxxxxx> > + */ > + > +#include <drm/bridge/dw_hdmi.h> > +#include <drm/drm_modes.h> > +#include <linux/clk.h> > +#include <linux/mod_devicetable.h> > +#include <linux/module.h> > +#include <linux/platform_device.h> > + > +struct imx_hdmi { The driver is specific to the i.MX8MP, so I'd name the structure imx8mp_hdmi. Same for the probe and remove functions and for imx_dw_hdmi_of_table. > + struct dw_hdmi_plat_data plat_data; > + struct dw_hdmi *dw_hdmi; > + struct clk *pixclk; > + struct clk *fdcc; > +}; > + > +static enum drm_mode_status > +imx8mp_hdmi_mode_valid(struct dw_hdmi *dw_hdmi, void *data, > + const struct drm_display_info *info, > + const struct drm_display_mode *mode) > +{ > + struct imx_hdmi *hdmi = (struct imx_hdmi *)data; > + > + if (mode->clock < 13500) > + return MODE_CLOCK_LOW; > + > + if (mode->clock > 297000) > + return MODE_CLOCK_HIGH; > + > + if (clk_round_rate(hdmi->pixclk, mode->clock * 1000) != > + mode->clock * 1000) > + return MODE_CLOCK_RANGE; I wonder if we need some tolerance here. It can be done later. > + > + /* We don't support double-clocked and Interlaced modes */ > + if ((mode->flags & DRM_MODE_FLAG_DBLCLK) || > + (mode->flags & DRM_MODE_FLAG_INTERLACE)) > + return MODE_BAD; > + > + return MODE_OK; > +} > + > +static int imx8mp_hdmi_phy_init(struct dw_hdmi *dw_hdmi, void *data, > + const struct drm_display_info *display, > + const struct drm_display_mode *mode) > +{ > + return 0; > +} > + > +static void imx8mp_hdmi_phy_disable(struct dw_hdmi *dw_hdmi, void *data) > +{ > +} > + > +static const struct dw_hdmi_phy_ops imx8mp_hdmi_phy_ops = { > + .init = imx8mp_hdmi_phy_init, > + .disable = imx8mp_hdmi_phy_disable, > + .read_hpd = dw_hdmi_phy_read_hpd, > + .update_hpd = dw_hdmi_phy_update_hpd, > + .setup_hpd = dw_hdmi_phy_setup_hpd, > +}; > + > +static int imx_dw_hdmi_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct dw_hdmi_plat_data *plat_data; > + struct imx_hdmi *hdmi; > + int ret; > + > + hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL); > + if (!hdmi) > + return -ENOMEM; > + > + plat_data = &hdmi->plat_data; > + > + hdmi->pixclk = devm_clk_get(dev, "pix"); > + if (IS_ERR(hdmi->pixclk)) > + return dev_err_probe(dev, PTR_ERR(hdmi->pixclk), > + "Unable to get pixel clock\n"); > + > + hdmi->fdcc = devm_clk_get(dev, "fdcc"); > + if (IS_ERR(hdmi->fdcc)) > + return dev_err_probe(dev, PTR_ERR(hdmi->fdcc), > + "Unable to get FDCC clock\n"); > + > + ret = clk_prepare_enable(hdmi->fdcc); Any chance to handle this through runtime PM (or through something else, depending on what the clock is) to avoid leaving it enabled all the time ? > + if (ret) > + return dev_err_probe(dev, ret, "Unable to enable FDCC clock\n"); > + > + plat_data->mode_valid = imx8mp_hdmi_mode_valid; > + plat_data->phy_ops = &imx8mp_hdmi_phy_ops; > + plat_data->phy_name = "SAMSUNG HDMI TX PHY"; > + plat_data->priv_data = hdmi; > + > + hdmi->dw_hdmi = dw_hdmi_probe(pdev, plat_data); > + if (IS_ERR(hdmi->dw_hdmi)) You need to disable the fdcc clock here. > + return PTR_ERR(hdmi->dw_hdmi); > + > + /* > + * Just release PHY core from reset, all other power management is done > + * by the PHY driver. > + */ > + dw_hdmi_phy_gen1_reset(hdmi->dw_hdmi); Any risk of race condition where the PHY wouldn't be released out of reset before the HDMI bridge is used, as you call dw_hdmi_probe() first ? > + > + platform_set_drvdata(pdev, hdmi); > + > + return 0; > +} > + > +static int imx_dw_hdmi_remove(struct platform_device *pdev) > +{ > + struct imx_hdmi *hdmi = platform_get_drvdata(pdev); > + > + dw_hdmi_remove(hdmi->dw_hdmi); > + > + clk_disable_unprepare(hdmi->fdcc); > + > + return 0; > +} > + > +static const struct of_device_id imx_dw_hdmi_of_table[] = { > + { .compatible = "fsl,imx8mp-hdmi" }, > + { /* Sentinel */ }, > +}; > +MODULE_DEVICE_TABLE(of, imx_dw_hdmi_of_table); > + > +static struct platform_driver im_dw_hdmi_platform_driver = { This one is even missing the x from imx :-) imxmp_dw_hdmi_platform_driver for coherency with the rest. > + .probe = imx_dw_hdmi_probe, > + .remove = imx_dw_hdmi_remove, > + .driver = { > + .name = "imx-dw-hdmi", > + .of_match_table = imx_dw_hdmi_of_table, > + }, > +}; > + > +module_platform_driver(im_dw_hdmi_platform_driver); > + > +MODULE_DESCRIPTION("i.MX8M HDMI encoder driver"); s/i.MX8M/i.MX8MP/ With these issues addressed, Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > +MODULE_LICENSE("GPL"); -- Regards, Laurent Pinchart