On Mon, Mar 18, 2013 at 04:59:35PM +0100, Bjørn Mork wrote:
> Sergio Callegari <sergio.callegari@xxxxxxxxx> writes:
>
> > This is just a short note to let you know that after installing 3.8.3,
> > display port stopped working on my laptop. Going back to 3.8.2 brought
> > it back to life.
> > This has been tested with the ubuntu mainline kernels that should be
> > vanilla stable kernels. Hope this is not an incorrect report due to
> > something wrong on their side. Laptop is a DELL E6500 with intel gen4
> > integrated graphics (Intel Corporation Mobile 4 Series Chipset
> > Integrated Graphics Controller (rev 07)).
> > With 3.8.3, xrandr does not report anymore the external monitor when
> > it is actually attached via displayport.
>
> I can confirm seeing this bug on:
>
> # lspci -nnvvvs 00:02.0
> 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
> Subsystem: Lenovo Device [17aa:20e4]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 45
> Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
> Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
> Region 4: I/O ports at 1800 [size=8]
> Expansion ROM at <unassigned> [disabled]
> Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
> Address: fee0300c Data: 4152
> Capabilities: [d0] Power Management version 3
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: i915
>
>
>
> Looking through the changes from v3.8.2 to v3.8.3, there weren't really
> that many suspects. This partial (to avoid having to change any
> following patches) revert of commit 2a98104 ("drm/i915: reorder setup
> sequence to have irqs for output setup") fixes the problem for me. I
> have no idea why, so I leave it to Daniel and the other wise men working
> on this driver to explain and cleanup :)
Already taken care of hopefully:
http://lists.freedesktop.org/archives/intel-gfx/2013-March/025767.html
My apologies to everyone who's suffering through this breakage, it looks
like I've managed to serious burn myself with an innocent looking stable
backport :(
Yours, Daniel
>
>
> ---
> drivers/gpu/drm/i915/i915_dma.c | 14 ++++++--------
> 1 file changed, 6 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
> index 5206f24..b15b65d 100644
> --- a/drivers/gpu/drm/i915/i915_dma.c
> +++ b/drivers/gpu/drm/i915/i915_dma.c
> @@ -1297,21 +1297,19 @@ static int i915_load_modeset_init(struct drm_device *dev)
> if (ret)
> goto cleanup_vga_switcheroo;
>
> - ret = drm_irq_install(dev);
> - if (ret)
> - goto cleanup_gem_stolen;
> -
> - /* Important: The output setup functions called by modeset_init need
> - * working irqs for e.g. gmbus and dp aux transfers. */
> intel_modeset_init(dev);
>
> ret = i915_gem_init(dev);
> if (ret)
> - goto cleanup_irq;
> + goto cleanup_gem_stolen;
> +
> + intel_modeset_gem_init(dev);
>
> INIT_WORK(&dev_priv->console_resume_work, intel_console_resume);
>
> - intel_modeset_gem_init(dev);
> + ret = drm_irq_install(dev);
> + if (ret)
> + goto cleanup_gem;
>
> /* Always safe in the mode setting case. */
> /* FIXME: do pre/post-mode set stuff in core KMS code */
>
>
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
