Hi Florian,
Am 05.08.22 um 01:11 schrieb Florian Fainelli:
On 6/13/22 07:47, Maxime Ripard wrote:
From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
The BCM2835-37 found in the RaspberryPi 0 to 3 have a power domain
attached to the HDMI block, handled in Linux through runtime_pm.
That power domain is shared with the VEC block, so even if we put our
runtime_pm reference in the HDMI driver it would keep being on. If the
VEC is disabled though, the power domain would be disabled and we would
lose any initialization done in our bind implementation.
That initialization involves calling the reset function and initializing
the CEC registers.
Let's move the initialization to our runtime_resume implementation so
that we initialize everything properly if we ever need to.
Fixes: c86b41214362 ("drm/vc4: hdmi: Move the HSM clock enable to
runtime_pm")
Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
After seeing the same warning as Stefan reported in the link below,
but on the Raspberry Pi 4B:
https://www.spinics.net/lists/dri-devel/msg354170.html
a separate bisection effort led me to this commit, before is fine,
after produces 4 warnings during boot, see attached log.
Which config do you use (multi_v7_defconfig + LPAE or arm64/defconfig)?
Is there a fix that we can try that would also cover the Raspberry Pi
4B? Is it possible that this series precipitates the problem:
https://www.spinics.net/lists/arm-kernel/msg984638.html
I don't think this is related because this is a different driver.
Best regards
