Re: [PATCH 4/8] drm/tidss: Add support for Dual Link LVDS Bus Format

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 28/07/2022 14:03, Tomi Valkeinen wrote:
On 19/07/2022 11:08, Aradhya Bhatia wrote:
The 2 OLDI TXes in the AM625 SoC can be synced together to output a 2K
resolution video.

Add support in the driver for the discovery of such a dual mode
connection on the OLDI video port, using the values of "ti,oldi-mode"
property.

Signed-off-by: Aradhya Bhatia <a-bhatia1@xxxxxx>
---
  drivers/gpu/drm/tidss/tidss_dispc.c | 39 +++++++++++++++++++++--------
  1 file changed, 28 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/tidss/tidss_dispc.c b/drivers/gpu/drm/tidss/tidss_dispc.c
index add725fa682b..fb1fdecfc83a 100644
--- a/drivers/gpu/drm/tidss/tidss_dispc.c
+++ b/drivers/gpu/drm/tidss/tidss_dispc.c
@@ -853,25 +853,36 @@ void dispc_set_irqenable(struct dispc_device *dispc, dispc_irq_t mask)
      }
  }
-enum dispc_oldi_mode_reg_val { SPWG_18 = 0, JEIDA_24 = 1, SPWG_24 = 2 };
+enum dispc_oldi_mode_reg_val {
+    SPWG_18        = 0,
+    JEIDA_24    = 1,
+    SPWG_24        = 2,
+    DL_SPWG_18    = 4,
+    DL_JEIDA_24    = 5,
+    DL_SPWG_24    = 6,
+};
  struct dispc_bus_format {
      u32 bus_fmt;
      u32 data_width;
      bool is_oldi_fmt;
+    bool is_dual_link;
      enum dispc_oldi_mode_reg_val oldi_mode_reg_val;
  };
  static const struct dispc_bus_format dispc_bus_formats[] = {
-    { MEDIA_BUS_FMT_RGB444_1X12,        12, false, 0 },
-    { MEDIA_BUS_FMT_RGB565_1X16,        16, false, 0 },
-    { MEDIA_BUS_FMT_RGB666_1X18,        18, false, 0 },
-    { MEDIA_BUS_FMT_RGB888_1X24,        24, false, 0 },
-    { MEDIA_BUS_FMT_RGB101010_1X30,        30, false, 0 },
-    { MEDIA_BUS_FMT_RGB121212_1X36,        36, false, 0 },
-    { MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,    18, true, SPWG_18 },
-    { MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,    24, true, SPWG_24 },
-    { MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA,    24, true, JEIDA_24 },
+    { MEDIA_BUS_FMT_RGB444_1X12,        12, false, false, 0 },
+    { MEDIA_BUS_FMT_RGB565_1X16,        16, false, false, 0 },
+    { MEDIA_BUS_FMT_RGB666_1X18,        18, false, false, 0 },
+    { MEDIA_BUS_FMT_RGB888_1X24,        24, false, false, 0 },
+    { MEDIA_BUS_FMT_RGB101010_1X30,        30, false, false, 0 },
+    { MEDIA_BUS_FMT_RGB121212_1X36,        36, false, false, 0 },
+    { MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,    18, true, false, SPWG_18 },
+    { MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,    24, true, false, SPWG_24 },
+    { MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA,    24, true, false, JEIDA_24 },
+    { MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,    18, true, true, DL_SPWG_18 },
+    { MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,    24, true, true, DL_SPWG_24 },
+    { MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA,    24, true, true, DL_JEIDA_24 },
  };

So the dual link sends two pixels per clock, right? Are there panel or bridge drivers that support this? My initial thought was that it should be a new bus format.

Looks like we have drm bridges supporting dual link, and they use the "normal" bus format. Did you have a look at them? They require two port nodes for dual link, and use the existence of the second one to decide if dual link is used or not.

There are also lvds helpers in drm_of.c. I didn't look closely, but it looked to me that the helpers can tell you if the ports are connected to a dual link bridge. If not, you could fall back to cloning. This way no extra properties are needed. But you will need to add a port node, which I think you need to add anyway for cloning.

 Tomi



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux