From: Kevin Brace <kevinbrace@xxxxxxxxxxxxxxxxxxxx> Hi, This is my first attempt (this is not a RFC posting) in trying to get OpenChrome DRM pulled in for Linux 5.20. I started to work on this seriously around the summer of 2017, so it has been a long journey. I know that the code is not quite perfect, but I have done as much work as I can do on my own, and I now think that I should post the code on dri-devel mailing list for other people to take a look at it. Whether or not the code itself works or not, no, OpenChrome DRM is not some vaporware, and the code reliability is comparable to the existing OpenChrome DDX UMS code path. The code reliability is more than good enough to the point where I utilize the module almost every time I work on developing the code. I am aware that the hardware (silicon) is quite old by today's standards, so not too many people "still" (the word one open source software focused journalist often uses to describe greater than 5 year old computer hardware) own the VIA silicon hardware to actually test the code themselves. The current code is developed against drm-next branch drm-next-2022-06-03-1 tag. The current iteration of the code has no support for acceleration. It is currently a mode setting only DRM module. Even if the code is pulled into the Linux kernel tree, I will consider the code experimental until at least 2D acceleration is implemented for all supported devices. Because of this, the DRM module requires via.modeset=1 to be added to Linux kernel boot option line for it to function, and I intend to keep this arrangement in place until at least 2D acceleration is fully supported. As a result, I think the code is fairly low risk to be pulled into the Linux kernel tree. The current module version is 3.5.7, but when the code is about to be pulled into the kernel tree, I will like to up the version to 4.0.0. This is because James Simmons era OpenChrome DRM used version number 3.0.x, but the current OpenChrome DRM uAPI implementation is different from his implementation, so I will like to assign a new major version (i.e., 4) so that DDX can distinguish the old and new OpenChrome DRM. The current uAPI has no backward compatibility with the older DRI1 based implementation, although some remnants of old DRI1 based uAPI still needs to be there inside via_drm.h for XvMC based libraries on the DDX side to properly compile. It is my intention to replace the old DRI1 based VIA DRM located at drivers/gpu/drm/via/ with OpenChrome DRM at the same location. As I indicated previously, I do not wish to get pulled into the staging area of the kernel tree. I personally will like to have the option of porting the code to BSD someday, however, the I2C bus access module (via_i2c.c) is GPL based, so the DRM module license type is GPL (everything else is MIT license based), for now. I hope to replace this module someday with equivalent functionality code that will be MIT license based. I hope the uAPI variable types are compatible with BSD (please give me advise on this since I do not know too much about this) since James Simmons brought this up back in 2013 when he posted the code as RFC. https://lists.freedesktop.org/archives/dri-devel/2013-June/039594.html https://lists.freedesktop.org/archives/dri-devel/2013-June/040811.html Features: - Supports 12 different generations of VIA Technologies Chrome based integrated graphics (CLE266 / KM400 / K8M800 / P4M800 Pro / PM800 / P4M890 / K8M890 / P4M900 / CX700 / VX800 / VX855 / VX900 chipset) and their variants - Support for DAC (VGA), LVDS flat panel, DVI (CX700 / VX800 chipset integrated, VX900 chipset integrated, and Silicon Image SiI164 / VIA Technologies VT1632(A) DVI transmitter), and HDMI (VX900H chipset integrated) - Support for standby resume (ACPI S3 State) - Support for dual head operation - Supports atomic mode setting (implementation might still be incomplete especially around gamma correction / palette initialization) - Utilizes GEM / TTM for memory management - Utilizes DRM FB Helper for FBDEV emulation Known issues: - Gamma correction / palette initialization code is still legacy KMS based (Daniel, how do I convert it for atomic mode setting?) - uAPI might not be quite right (Do I need something like DRM_IOCTL_VIA_GEM_DESTROY or DRM_IOCTL_VIA_GEM_FREE call to pair it against DRM_IOCTL_VIA_GEM_CREATE?) Code repository: https://cgit.freedesktop.org/openchrome/drm-openchrome/ Current bleeding edge branch (drm-next-5.20 branch): https://cgit.freedesktop.org/openchrome/drm-openchrome/?h=drm-next-5.20 Current bleeding edge branch (drm-next-5.20 branch) code location: https://cgit.freedesktop.org/openchrome/drm-openchrome/tree/drivers/gpu/drm/via?h=drm-next-5.20 https://cgit.freedesktop.org/openchrome/drm-openchrome/tree/include/uapi/drm?h=drm-next-5.20 Obviously, I do not expect to get the code pulled in on my first try, but if other people can point out what I need to improve, I will try to improve the code so that I can get the code pulled in as soon as possible. Personally, I will like the code to be pulled in for Linux 5.20, but I sort of expect the next release after 5.20 is more likely. Regards, Kevin Brace Brace Computer Laboratory blog https://bracecomputerlab.com v2: Deletes include/uapi/drm/via_drm.h. Deletes VIA DRM from drivers/gpu/drm/Kconfig before restoring it in a later patch. Adds relevant VIA Technologies PCI IDs to include/drm/drm_pciids.h and include/linux/pci_ids.h. No changes to its module functionality. Thanks to Sam Ravnborg and Peter Robinson for pointing out the issues. v3: Added CLE266 chipset external DVI transmitter support. Fix for DVI on AGP based UniChrome (Pro) graphics. White space fixes. Elimination of compile time warnings. IOCTL functions are now registered inside via_drv.c. uAPI header include/uapi/drm/via_drm.h is now overlayed over the old file per Sam Ravnborg's suggestion. Module version is 3.5.7. --- Kevin Brace (32): drm/via: Delete VIA DRM code drm/via: Add via_3d_reg.h drm/via: Add via_crtc_hw.h drm/via: Add via_disp_reg.h drm/via: Add via_drv.h drm/via: Add via_regs.h drm/via: Add via_crtc.c drm/via: Add via_crtc_hw.c drm/via: Add via_cursor.c drm/via: Add via_dac.c drm/via: Add via_display.c drm/via: Add via_drv.c drm/via: Add via_encoder.c drm/via: Add via_hdmi.c drm/via: Add via_i2c.c drm/via: Add via_init.c drm/via: Add via_ioctl.c drm/via: Add via_lvds.c drm/via: Add via_object.c drm/via: Add via_pll.c drm/via: Add via_pm.c drm/via: Add via_sii164.c drm/via: Add via_tmds.c drm/via: Add via_ttm.c drm/via: Add via_vt1632.c drm/via: Add via_drm.h drm/via: Add new VIA Technologies Chrome supporting PCI IDs to DRM drm/via: Zero out chip type field drm/via: Add new VIA Technologies PCI device IDs related to graphics drm/via: Add Kconfig drm/via: Add Makefile drm/via: Modify DRM core to be able to build OpenChrome DRM drivers/gpu/drm/Kconfig | 9 +- drivers/gpu/drm/Makefile | 2 +- drivers/gpu/drm/via/Kconfig | 9 + drivers/gpu/drm/via/Makefile | 24 +- drivers/gpu/drm/via/via_3d_reg.h | 395 +++-- drivers/gpu/drm/via/via_crtc.c | 2333 ++++++++++++++++++++++++++++ drivers/gpu/drm/via/via_crtc_hw.c | 91 ++ drivers/gpu/drm/via/via_crtc_hw.h | 1190 ++++++++++++++ drivers/gpu/drm/via/via_cursor.c | 419 +++++ drivers/gpu/drm/via/via_dac.c | 504 ++++++ drivers/gpu/drm/via/via_disp_reg.h | 513 ++++++ drivers/gpu/drm/via/via_display.c | 125 ++ drivers/gpu/drm/via/via_dma.c | 744 --------- drivers/gpu/drm/via/via_dmablit.c | 807 ---------- drivers/gpu/drm/via/via_dmablit.h | 140 -- drivers/gpu/drm/via/via_drv.c | 320 +++- drivers/gpu/drm/via/via_drv.h | 584 ++++--- drivers/gpu/drm/via/via_encoder.c | 224 +++ drivers/gpu/drm/via/via_hdmi.c | 661 ++++++++ drivers/gpu/drm/via/via_i2c.c | 209 +++ drivers/gpu/drm/via/via_init.c | 1300 ++++++++++++++++ drivers/gpu/drm/via/via_ioctl.c | 109 ++ drivers/gpu/drm/via/via_irq.c | 388 ----- drivers/gpu/drm/via/via_lvds.c | 1233 +++++++++++++++ drivers/gpu/drm/via/via_map.c | 132 -- drivers/gpu/drm/via/via_mm.c | 241 --- drivers/gpu/drm/via/via_object.c | 324 ++++ drivers/gpu/drm/via/via_pll.c | 255 +++ drivers/gpu/drm/via/via_pm.c | 187 +++ drivers/gpu/drm/via/via_regs.h | 296 ++++ drivers/gpu/drm/via/via_sii164.c | 578 +++++++ drivers/gpu/drm/via/via_tmds.c | 712 +++++++++ drivers/gpu/drm/via/via_ttm.c | 168 ++ drivers/gpu/drm/via/via_verifier.c | 1110 ------------- drivers/gpu/drm/via/via_verifier.h | 62 - drivers/gpu/drm/via/via_video.c | 94 -- drivers/gpu/drm/via/via_vt1632.c | 598 +++++++ include/drm/drm_pciids.h | 10 +- include/linux/pci_ids.h | 15 + include/uapi/drm/via_drm.h | 35 +- 40 files changed, 13079 insertions(+), 4071 deletions(-) create mode 100644 drivers/gpu/drm/via/Kconfig create mode 100644 drivers/gpu/drm/via/via_crtc.c create mode 100644 drivers/gpu/drm/via/via_crtc_hw.c create mode 100644 drivers/gpu/drm/via/via_crtc_hw.h create mode 100644 drivers/gpu/drm/via/via_cursor.c create mode 100644 drivers/gpu/drm/via/via_dac.c create mode 100644 drivers/gpu/drm/via/via_disp_reg.h create mode 100644 drivers/gpu/drm/via/via_display.c delete mode 100644 drivers/gpu/drm/via/via_dma.c delete mode 100644 drivers/gpu/drm/via/via_dmablit.c delete mode 100644 drivers/gpu/drm/via/via_dmablit.h create mode 100644 drivers/gpu/drm/via/via_encoder.c create mode 100644 drivers/gpu/drm/via/via_hdmi.c create mode 100644 drivers/gpu/drm/via/via_i2c.c create mode 100644 drivers/gpu/drm/via/via_init.c create mode 100644 drivers/gpu/drm/via/via_ioctl.c delete mode 100644 drivers/gpu/drm/via/via_irq.c create mode 100644 drivers/gpu/drm/via/via_lvds.c delete mode 100644 drivers/gpu/drm/via/via_map.c delete mode 100644 drivers/gpu/drm/via/via_mm.c create mode 100644 drivers/gpu/drm/via/via_object.c create mode 100644 drivers/gpu/drm/via/via_pll.c create mode 100644 drivers/gpu/drm/via/via_pm.c create mode 100644 drivers/gpu/drm/via/via_regs.h create mode 100644 drivers/gpu/drm/via/via_sii164.c create mode 100644 drivers/gpu/drm/via/via_tmds.c create mode 100644 drivers/gpu/drm/via/via_ttm.c delete mode 100644 drivers/gpu/drm/via/via_verifier.c delete mode 100644 drivers/gpu/drm/via/via_verifier.h delete mode 100644 drivers/gpu/drm/via/via_video.c create mode 100644 drivers/gpu/drm/via/via_vt1632.c -- 2.35.1
