Currently the driver only handles panel directly connected to the DPI output.
Handle the case where a bridge is connected past DPI output of this bridge.
This could be e.g. DPI to LVDS encoder chip.
Signed-off-by: Marek Vasut <marex@xxxxxxx>
Cc: Jonas Karlman <jonas@xxxxxxxxx>
Cc: Laurent Pinchart <Laurent.pinchart@xxxxxxxxxxxxxxxx>
Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
Cc: Maxime Ripard <maxime@xxxxxxxxxx>
Cc: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
Cc: Robert Foss <robert.foss@xxxxxxxxxx>
Cc: Sam Ravnborg <sam@xxxxxxxxxxxx>
---
drivers/gpu/drm/bridge/tc358767.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index f8c1cd711753b..814ab206fe7ef 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -1926,22 +1926,23 @@ static int tc_mipi_dsi_host_attach(struct tc_data *tc)
static int tc_probe_dpi_bridge_endpoint(struct tc_data *tc)
{
struct device *dev = tc->dev;
+ struct drm_bridge *bridge;
struct drm_panel *panel;
int ret;
/* port@1 is the DPI input/output port */
- ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL);
+ ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, &bridge);
if (ret && ret != -ENODEV)
return ret;
if (panel) {
- struct drm_bridge *panel_bridge;
-
- panel_bridge = devm_drm_panel_bridge_add(dev, panel);
- if (IS_ERR(panel_bridge))
- return PTR_ERR(panel_bridge);
+ bridge = devm_drm_panel_bridge_add(dev, panel);
+ if (IS_ERR(bridge))
+ return PTR_ERR(bridge);
+ }
- tc->panel_bridge = panel_bridge;
+ if (bridge) {
+ tc->panel_bridge = bridge;
tc->bridge.type = DRM_MODE_CONNECTOR_DPI;
tc->bridge.funcs = &tc_dpi_bridge_funcs;
--
2.35.1
