From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
Hey all,
This series should rid us of dtbs_check errors for the RISC-V Canaan k210
based boards. To make keeping it that way a little easier, I changed the
Canaan devicetree Makefile so that it would build all of the devicetrees
in the directory if SOC_CANAAN.
I *DO NOT* have any Canaan hardware so I have not tested any of this in
action. Since I sent v1, I tried to buy some since it's cheap - but could
out of the limited stockists none seemed to want to deliver to Ireland :(
I based the series on next-20220617.
Thanks,
Conor.
Changes since v4:
- add Rob's tags from v3
- sram: rephrase the binding description
- ASoC: dropped the applied binding
Changes since v3:
- dts: drop the bogus "regs" property pointed out by Niklas
- dma/timer: add Serge's reviews (and expand on the dma interrupt
description)
- dts: add Niklas' T-b where I felt it was suitable. lmk if you think it
applies more broadly
- spi: drop the applied spi dt-binding change. Thanks Mark.
Changes since v2:
- i2s: added clocks maxItems
- dma: unconditionally extended the interrupts & dropped canaan
compatible
- timer: as per Sergey, split the timer dts nodes in 2 & drop the
binding patch
- ili9341: add a canaan specific compatible to the binding and dts
Changes since v1:
- I added a new dt node & compatible for the SRAM memory controller due
Damien's wish to preserve the inter-op with U-Boot.
- The dw-apb-ssi binding now uses the default rx/tx widths
- A new patch fixes bus {ranges,reg} warnings
- Rearranged the patches in a slightly more logical order
Conor Dooley (13):
dt-bindings: display: convert ilitek,ili9341.txt to dt-schema
dt-bindings: display: ili9341: document canaan kd233's lcd
dt-bindings: dma: dw-axi-dmac: extend the number of interrupts
dt-bindings: memory-controllers: add canaan k210 sram controller
riscv: dts: canaan: fix the k210's memory node
riscv: dts: canaan: fix the k210's timer nodes
riscv: dts: canaan: fix mmc node names
riscv: dts: canaan: fix kd233 display spi frequency
riscv: dts: canaan: use custom compatible for k210 i2s
riscv: dts: canaan: remove spi-max-frequency from controllers
riscv: dts: canaan: fix bus {ranges,reg} warnings
riscv: dts: canaan: add specific compatible for kd233's LCD
riscv: dts: canaan: build all devicetress if SOC_CANAAN
.../bindings/display/ilitek,ili9341.txt | 27 -------
.../display/panel/ilitek,ili9341.yaml | 49 +++++++++----
.../bindings/dma/snps,dw-axi-dmac.yaml | 7 +-
.../memory-controllers/canaan,k210-sram.yaml | 52 +++++++++++++
arch/riscv/boot/dts/canaan/Makefile | 10 ++-
arch/riscv/boot/dts/canaan/canaan_kd233.dts | 6 +-
arch/riscv/boot/dts/canaan/k210.dtsi | 73 +++++++++++++------
.../riscv/boot/dts/canaan/sipeed_maix_bit.dts | 2 +-
.../boot/dts/canaan/sipeed_maix_dock.dts | 2 +-
arch/riscv/boot/dts/canaan/sipeed_maix_go.dts | 2 +-
.../boot/dts/canaan/sipeed_maixduino.dts | 2 +-
11 files changed, 159 insertions(+), 73 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9341.txt
create mode 100644 Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml
base-commit: b6f1f2fa2bddd69ff46a190b8120bd440fd50563
--
2.37.0
