Allwinner display drivers are split roughly into two generations. The first generation was found on early 32-bit ARM SoCs and contains DE1.0 and a custom HDMI controller. Clarify that these options only apply to a specific list of SoCs, and limit selecting them to 32-bit ARM, to avoid confusion. The second generation, found in A83T and newer SoCs (both 32-bit and 64-bit), contains a DE2.0 and a DesignWare HDMI controller. Since this is the most widely-used generation, enable it by default. The previous default condition (MACH_SUN8I) was limited to 32-bit SoCs. Also enable the DSI controller by default, which is found on 64-bit SoCs as well. Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx> --- drivers/gpu/drm/sun4i/Kconfig | 26 +++++++++++++++----------- 1 file changed, 15 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/sun4i/Kconfig b/drivers/gpu/drm/sun4i/Kconfig index 3a43c436c74a..1c2f8909f3cd 100644 --- a/drivers/gpu/drm/sun4i/Kconfig +++ b/drivers/gpu/drm/sun4i/Kconfig @@ -16,23 +16,25 @@ config DRM_SUN4I if DRM_SUN4I config DRM_SUN4I_HDMI - tristate "Allwinner A10 HDMI Controller Support" + tristate "Allwinner A10/A10s/A20/A31 HDMI Controller Support" + depends on ARM || COMPILE_TEST default DRM_SUN4I help - Choose this option if you have an Allwinner SoC with an HDMI - controller. + Choose this option if you have an Allwinner A10/A10s/A20/A31 + SoC with an HDMI controller. config DRM_SUN4I_HDMI_CEC - bool "Allwinner A10 HDMI CEC Support" + bool "Allwinner A10/A10s/A20/A31 HDMI CEC Support" depends on DRM_SUN4I_HDMI select CEC_CORE select CEC_PIN help - Choose this option if you have an Allwinner SoC with an HDMI - controller and want to use CEC. + Choose this option if you have an Allwinner A10/A10s/A20/A31 + SoC with an HDMI controller and want to use CEC. config DRM_SUN4I_BACKEND tristate "Support for Allwinner A10 Display Engine Backend" + depends on ARM || COMPILE_TEST default DRM_SUN4I help Choose this option if you have an Allwinner SoC with the @@ -41,8 +43,8 @@ config DRM_SUN4I_BACKEND selected the module will be called sun4i-backend. config DRM_SUN6I_DSI - tristate "Allwinner A31 MIPI-DSI Controller Support" - default MACH_SUN8I + tristate "Allwinner A31/A64 MIPI-DSI Controller Support" + default DRM_SUN4I select CRC_CCITT select DRM_MIPI_DSI select RESET_CONTROLLER @@ -55,15 +57,17 @@ config DRM_SUN6I_DSI config DRM_SUN8I_DW_HDMI tristate "Support for Allwinner version of DesignWare HDMI" depends on DRM_SUN4I + default DRM_SUN4I select DRM_DW_HDMI help Choose this option if you have an Allwinner SoC with the - DesignWare HDMI controller with custom HDMI PHY. If M is + DesignWare HDMI controller. SoCs that support HDMI and + have a Display Engine 2.0 contain this controller. If M is selected the module will be called sun8i_dw_hdmi. config DRM_SUN8I_MIXER tristate "Support for Allwinner Display Engine 2.0 Mixer" - default MACH_SUN8I + default DRM_SUN4I help Choose this option if you have an Allwinner SoC with the Allwinner Display Engine 2.0, which has a mixer to do some @@ -75,6 +79,6 @@ config DRM_SUN8I_TCON_TOP default DRM_SUN4I if DRM_SUN8I_MIXER!=n help TCON TOP is responsible for configuring display pipeline for - HTMI, TVE and LCD. + HDMI, TVE and LCD. endif -- 2.35.1
