Now that a header exists with macros for the media interface bus-type values, replace hardcoding numerical constants with the corresponding macros in the DT binding examples. Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> --- Changes since v2: - Go back to PARALLEL Changes since v1: - Rename PARALLEL to BT601 --- .../devicetree/bindings/display/bridge/analogix,anx7625.yaml | 1 + Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml | 3 ++- Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml | 3 ++- .../devicetree/bindings/media/marvell,mmp2-ccic.yaml | 3 ++- Documentation/devicetree/bindings/media/microchip,xisc.yaml | 3 ++- Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml | 4 +++- 6 files changed, 12 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml index 35a48515836e..b0e5585f93e2 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -118,6 +118,7 @@ additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> i2c0 { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml index 39395ea8c318..edde4201116f 100644 --- a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml +++ b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml @@ -104,6 +104,7 @@ additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> i2c2 { #address-cells = <1>; @@ -124,7 +125,7 @@ examples: remote-endpoint = <&csi2a_ep>; link-frequencies = /bits/ 64 <199200000 210000000 499200000>; - bus-type = <4>; + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; }; }; }; diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml index 44529425ce3a..161e6d598e1c 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml @@ -105,6 +105,7 @@ additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> i2c0 { #address-cells = <1>; @@ -118,7 +119,7 @@ examples: port { ov772x_0: endpoint { - bus-type = <5>; + bus-type = <MEDIA_BUS_TYPE_PARALLEL>; vsync-active = <0>; hsync-active = <0>; pclk-sample = <0>; diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml index b39b84c5f012..0e3478551e13 100644 --- a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml +++ b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml @@ -68,6 +68,7 @@ additionalProperties: false examples: - | #include <dt-bindings/clock/marvell,mmp2.h> + #include <dt-bindings/media/video-interfaces.h> #include <dt-bindings/power/marvell,mmp2.h> camera@d420a000 { @@ -83,7 +84,7 @@ examples: port { camera0_0: endpoint { remote-endpoint = <&ov7670_0>; - bus-type = <5>; /* Parallel */ + bus-type = <MEDIA_BUS_TYPE_PARALLEL>; hsync-active = <1>; /* Active high */ vsync-active = <1>; /* Active high */ pclk-sample = <0>; /* Falling */ diff --git a/Documentation/devicetree/bindings/media/microchip,xisc.yaml b/Documentation/devicetree/bindings/media/microchip,xisc.yaml index 8b37fccab5e2..25f5f79d40ce 100644 --- a/Documentation/devicetree/bindings/media/microchip,xisc.yaml +++ b/Documentation/devicetree/bindings/media/microchip,xisc.yaml @@ -106,6 +106,7 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/at91.h> #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/media/video-interfaces.h> xisc: xisc@e1408000 { compatible = "microchip,sama7g5-isc"; @@ -118,7 +119,7 @@ examples: port { xisc_in: endpoint { - bus-type = <5>; /* Parallel */ + bus-type = <MEDIA_BUS_TYPE_PARALLEL>; remote-endpoint = <&csi2dc_out>; hsync-active = <1>; vsync-active = <1>; diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml index 9c1262a276b5..285c6075950a 100644 --- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml +++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml @@ -90,7 +90,9 @@ examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/media/video-interfaces.h> #include <dt-bindings/reset/stm32mp1-resets.h> + # dcmi: dcmi@4c006000 { compatible = "st,stm32-dcmi"; reg = <0x4c006000 0x400>; @@ -104,7 +106,7 @@ examples: port { dcmi_0: endpoint { remote-endpoint = <&ov5640_0>; - bus-type = <5>; + bus-type = <MEDIA_BUS_TYPE_PARALLEL>; bus-width = <8>; hsync-active = <0>; vsync-active = <0>; -- Regards, Laurent Pinchart